revert: fix(anchor): serial reads are now non-blocking

This reverts commit fc2ba5f8d1.

reason: making serail reads non-blocking caused serial data issues
because sometimes it would exit before actually seeing a newline

README.md

@@ -68,12 +68,25 @@ Anchor provides a mock connector meant for testing and scripting purposes. You c
 $ ros2 launch anchor_pkg rover.launch.py connector:="mock"
 ```
 
-You can see all data sent to it in a string format with this command:
+To see all data that would be sent over the CAN network (and thus to the microcontrollers), use this command:
 
 ```bash
 $ ros2 topic echo /anchor/to_vic/debug
 ```
 
+To send data to the mock connector (as if you were a ROS2 node), use the normal relay topic:
+
+```bash
+$ ros2 topic pub /anchor/to_vic/relay astra_msgs/msg/VicCAN '{mcu_name: "core", command_id: 50, data: [0.0, 2.0, 0.0, 1.0]}'
+
+```
+
+To send data to the mock connector (as if you were a microcontroller), publish to the dedicated topic:
+
+```bash
+$ ros2 topic pub /anchor/from_vic/mock_mcu astra_msgs/msg/VicCAN '{mcu_name: "arm", command_id: 55, data: [0.0, 450.0, 900.0, 0.0]}'
+```
+
 ### Testing Serial
 
 You can fake the presence of a Serial device (i.e., MCU) by using the following command:

auto_start/auto_start_anchor.sh

@@ -1,12 +1,12 @@
 #!/usr/bin/env bash
 set -e
 
-SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+SCRIPT_DIR=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)
 
 # Wait for a network interface to be up (not necessarily online)
 while ! ip link show | grep -q "state UP"; do
-    echo "[INFO] Waiting for active network interface..."
-    sleep 1
+  echo "[INFO] Waiting for active network interface..."
+  sleep 1
 done
 
 echo "[INFO] Network interface is up!"
@@ -16,9 +16,9 @@ echo "[INFO] Starting ROS node..."
 
 # Source ROS 2 Humble setup script
 if command -v nixos-rebuild; then
-    echo "[INFO] running on NixOS"
+  echo "[INFO] running on NixOS"
 else
-    source /opt/ros/humble/setup.bash
+  source /opt/ros/humble/setup.bash
 fi
 
 # Source your workspace setup script

auto_start/auto_start_headless_full.sh

@@ -1,12 +1,12 @@
 #!/usr/bin/env bash
 set -e
 
-SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+SCRIPT_DIR=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)
 
 # Wait for a network interface to be up (not necessarily online)
 while ! ip link show | grep -q "state UP"; do
-    echo "[INFO] Waiting for active network interface..."
-    sleep 1
+  echo "[INFO] Waiting for active network interface..."
+  sleep 1
 done
 
 echo "[INFO] Network interface is up!"
@@ -16,9 +16,9 @@ echo "[INFO] Starting ROS node..."
 
 # Source ROS 2 Humble setup script
 if command -v nixos-rebuild; then
-    echo "[INFO] running on NixOS"
+  echo "[INFO] running on NixOS"
 else
-    source /opt/ros/humble/setup.bash
+  source /opt/ros/humble/setup.bash
 fi
 
 # Source your workspace setup script
@@ -26,4 +26,3 @@ source $SCRIPT_DIR/../install/setup.bash
 
 # Launch the ROS 2 node
 ros2 run headless_pkg headless_full
-

auto_start/start_rosbag.sh

@@ -1,26 +1,25 @@
 #!/usr/bin/env bash
 set -e
 
-SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+SCRIPT_DIR=$(cd -- "$(dirname -- "${BASH_SOURCE[0]}")" &>/dev/null && pwd)
 
-[[ -z "$ANCHOR_WS" ]] && ANCHOR_WS="$SCRIPT_DIR/.."
-[[ -z "$AUTONOMY_WS" ]] && AUTONOMY_WS="$HOME/rover-Autonomy"
+[[ -z $ANCHOR_WS ]] && ANCHOR_WS="$SCRIPT_DIR/.."
+[[ -z $AUTONOMY_WS ]] && AUTONOMY_WS="$HOME/rover-Autonomy"
 BAG_LOCATION="$HOME/bags/autostart"
-[[ ! -d "$BAG_LOCATION" ]] && mkdir -p "$BAG_LOCATION"
+[[ ! -d $BAG_LOCATION ]] && mkdir -p "$BAG_LOCATION"
 
 # Wait for a network interface to be up (not necessarily online)
 while ! ip link show | grep -q "state UP"; do
-    echo "[INFO] Waiting for active network interface..."
-    sleep 1
+  echo "[INFO] Waiting for active network interface..."
+  sleep 1
 done
 
 echo "[INFO] Network interface is up!"
 
-
 if command -v nixos-rebuild; then
-    echo "[INFO] running on NixOS"
+  echo "[INFO] running on NixOS"
 else
-    source /opt/ros/humble/setup.bash
+  source /opt/ros/humble/setup.bash
 fi
 source $ANCHOR_WS/install/setup.bash
 [[ -f $AUTONOMY_WS/install/setup.bash ]] && source $AUTONOMY_WS/install/setup.bash

flake.lock

@@ -24,16 +24,16 @@
         "nixpkgs": "nixpkgs"
       },
       "locked": {
-        "lastModified": 1770108954,
-        "narHash": "sha256-VBj6bd4LPPSfsZJPa/UPPA92dOs6tmQo0XZKqfz/3W4=",
+        "lastModified": 1775216071,
+        "narHash": "sha256-PrPW70Fh1uLx3JxNV/NLeXjUhgfrZmi7ac8LJOlS0q4=",
         "owner": "lopsided98",
         "repo": "nix-ros-overlay",
-        "rev": "3d05d46451b376e128a1553e78b8870c75d7753a",
+        "rev": "197a2b55c4ed24f8b885a5b20b65f426fb6d57ca",
         "type": "github"
       },
       "original": {
         "owner": "lopsided98",
-        "ref": "develop",
+        "ref": "master",
         "repo": "nix-ros-overlay",
         "type": "github"
       }

flake.nix

@@ -2,7 +2,7 @@
   description = "Development environment for ASTRA Anchor";
 
   inputs = {
-    nix-ros-overlay.url = "github:lopsided98/nix-ros-overlay/develop";
+    nix-ros-overlay.url = "github:lopsided98/nix-ros-overlay/master";
     nixpkgs.follows = "nix-ros-overlay/nixpkgs"; # IMPORTANT!!!
 
     treefmt-nix = {
@@ -31,6 +31,8 @@
           name = "ASTRA Anchor";
           packages = with pkgs; [
             colcon
+            socat
+            can-utils
             (python313.withPackages (
               p: with p; [
                 pyserial
@@ -96,7 +98,8 @@
     );
 
   nixConfig = {
-    extra-substituters = [ "https://ros.cachix.org" ];
-    extra-trusted-public-keys = [ "ros.cachix.org-1:dSyZxI8geDCJrwgvCOHDoAfOm5sV1wCPjBkKL+38Rvo=" ];
+    # Cache to pull ros packages from
+    extra-substituters = [ "https://ros.cachix.org" "https://attic.iid.ciirc.cvut.cz/ros" ];
+    extra-trusted-public-keys = [ "ros.cachix.org-1:dSyZxI8geDCJrwgvCOHDoAfOm5sV1wCPjBkKL+38Rvo=" "ros:JR95vUYsShSqfA1VTYoFt1Nz6uXasm5QrcOsGry9f6Q=" ];
   };
 }

scripts/reset-repo.bash

@@ -0,0 +1,38 @@
+#!/usr/bin/env bash
+
+repo_root="$(git rev-parse --show-toplevel)"
+
+if [[ -z $repo_root ]]; then
+  echo "script must be run from within a git repo" >&2
+  exit 1
+fi
+
+cd $repo_root
+
+echo "this will nuke all of your current un-commited git changes, including any changes to submodules and any gitignored files. is this okay? (y/N)"
+read okay
+
+if [[ $okay != "y" ]]; then
+  echo "you didn't say exactly 'y'. aborting." >&2
+  exit 2
+fi
+
+echo
+
+echo "ok say goodbye to everything in this repo"
+git submodule deinit --all -f && echo "- submodules gone"
+git clean -fdx && echo "- gitignored changes gone"
+git add -A
+git reset HEAD --hard && echo "- everything else gone"
+git submodule update --init --recursive && echo "- brought the submodules back"
+echo
+
+echo "in theory that should've done it. let's make sure"
+status=$(git status --porcelain)
+echo $status
+if [[ -z $status ]]; then
+  echo "nice, all clean!"
+else
+  echo "uhh that's not supposed to be there. this is probably a bug in this script. good luck!" >&2
+  exit 3
+fi

scripts/test-connectors.bash

@@ -0,0 +1,463 @@
+#!/usr/bin/env bash
+
+# test script for anchor connectors (mock, serial, CAN)
+
+set -o pipefail
+
+repo_root="$(git rev-parse --show-toplevel)"
+
+if [[ -z $repo_root ]]; then
+  echo "script must be run from within the rover-ros2 repo" >&2
+  exit 1
+fi
+
+cd "$repo_root"
+
+# colors
+BOLD='\033[1m'
+RED='\033[1;31m'
+GREEN='\033[1;32m'
+YELLOW='\033[1;33m'
+NC='\033[0m'
+
+TESTS_PASSED=0
+TESTS_FAILED=0
+
+log() {
+  echo -e "${BOLD}${YELLOW}info:${NC} ${1}"
+}
+
+pass() {
+  echo -e "${BOLD}${GREEN}pass:${NC} ${1}"
+  TESTS_PASSED=$((TESTS_PASSED + 1))
+}
+
+fail() {
+  echo -e "${BOLD}${RED}fail:${NC} ${1}"
+  TESTS_FAILED=$((TESTS_FAILED + 1))
+}
+
+cleanup() {
+  log "cleaning up"
+  if [[ -n $ANCHOR_PID ]]; then
+    kill -INT -- -"$ANCHOR_PID" 2>/dev/null || true
+    wait "$ANCHOR_PID" 2>/dev/null || true
+  fi
+  if [[ -n $SOCAT_PID ]]; then
+    kill -INT "$SOCAT_PID" 2>/dev/null || true
+    wait "$SOCAT_PID" 2>/dev/null || true
+  fi
+  rm -f /tmp/ttyACM9 /tmp/ttyOUT 2>/dev/null || true
+}
+
+trap cleanup EXIT
+
+source_ros2() {
+  source install/setup.bash
+}
+
+wait_for_topic() {
+  local topic="$1"
+  local timeout="${2:-5}"
+  local count=0
+  while ! ros2 topic list 2>/dev/null | grep -q "^${topic}$"; do
+    sleep 0.5
+    count=$((count + 1))
+    if [[ $count -ge $((timeout * 2)) ]]; then
+      return 1
+    fi
+  done
+  return 0
+}
+
+# run a ROS pub/echo test
+# usage: ros_pubsub_test <echo_topic> <pub_topic> <msg_type> <msg_data>
+# returns the echo output via stdout
+ros_pubsub_test() {
+  local echo_topic="$1"
+  local pub_topic="$2"
+  local msg_type="$3"
+  local msg_data="$4"
+
+  timeout 5 bash -c "
+    ros2 topic echo --once $echo_topic &
+    ECHO_PID=\$!
+    sleep 0.5
+    ros2 topic pub --once $pub_topic $msg_type \"$msg_data\" >/dev/null 2>&1
+    wait \$ECHO_PID
+  " 2>/dev/null || true
+}
+
+test_mock_connector() {
+  log "testing mock connector"
+
+  log "starting anchor with mock connector"
+  setsid ros2 run anchor_pkg anchor --ros-args -p connector:=mock &
+  ANCHOR_PID=$!
+  sleep 2
+
+  if ! kill -0 "$ANCHOR_PID" 2>/dev/null; then
+    fail "mock connector: anchor failed to start"
+    return 1
+  fi
+
+  if ! wait_for_topic "/anchor/to_vic/relay" 10; then
+    fail "mock connector: topics not available"
+    kill -INT -- -"$ANCHOR_PID" 2>/dev/null || true
+    return 1
+  fi
+
+  log "anchor started successfully"
+
+  # test: relay -> debug
+  log "testing relay -> debug"
+  local output
+  output=$(ros_pubsub_test "/anchor/to_vic/debug" "/anchor/to_vic/relay" \
+    "astra_msgs/msg/VicCAN" '{mcu_name: \"core\", command_id: 50, data: [1.0, 2.0, 3.0, 4.0]}')
+
+  if [[ -n $output ]] && echo "$output" | grep -q "can_relay_tovic,core,50"; then
+    pass "mock connector: relay -> debug"
+  else
+    fail "mock connector: relay -> debug"
+  fi
+
+  # test: mock_mcu -> from_vic/core
+  log "testing mock_mcu (core) -> from_vic/core"
+  output=$(ros_pubsub_test "/anchor/from_vic/core" "/anchor/from_vic/mock_mcu" \
+    "astra_msgs/msg/VicCAN" '{mcu_name: \"core\", command_id: 10, data: [100.0, 200.0]}')
+
+  if [[ -n $output ]] && echo "$output" | grep -q "mcu_name: core" && echo "$output" | grep -q "command_id: 10"; then
+    pass "mock connector: mock_mcu -> from_vic/core"
+  else
+    fail "mock connector: mock_mcu -> from_vic/core"
+  fi
+
+  # test: mock_mcu -> from_vic/arm
+  log "testing mock_mcu (arm) -> from_vic/arm"
+  output=$(ros_pubsub_test "/anchor/from_vic/arm" "/anchor/from_vic/mock_mcu" \
+    "astra_msgs/msg/VicCAN" '{mcu_name: \"arm\", command_id: 55, data: [0.0, 450.0, 900.0, 0.0]}')
+
+  if [[ -n $output ]] && echo "$output" | grep -q "mcu_name: arm" && echo "$output" | grep -q "command_id: 55"; then
+    pass "mock connector: mock_mcu -> from_vic/arm"
+  else
+    fail "mock connector: mock_mcu -> from_vic/arm"
+  fi
+
+  # test: mock_mcu -> from_vic/bio
+  log "testing mock_mcu (citadel) -> from_vic/bio"
+  output=$(ros_pubsub_test "/anchor/from_vic/bio" "/anchor/from_vic/mock_mcu" \
+    "astra_msgs/msg/VicCAN" '{mcu_name: \"citadel\", command_id: 20, data: [5.0]}')
+
+  if echo "$output" | grep -q "mcu_name: citadel" && echo "$output" | grep -q "command_id: 20"; then
+    pass "mock connector: mock_mcu -> from_vic/bio"
+  else
+    fail "mock connector: mock_mcu -> from_vic/bio"
+  fi
+
+  # test: relay_string -> debug
+  log "testing relay_string -> debug"
+  output=$(ros_pubsub_test "/anchor/to_vic/debug" "/anchor/to_vic/relay_string" \
+    "std_msgs/msg/String" '{data: \"test_raw_string_data\"}')
+
+  if [[ -n $output ]] && echo "$output" | grep -q "test_raw_string_data"; then
+    pass "mock connector: relay_string -> debug"
+  else
+    fail "mock connector: relay_string -> debug"
+  fi
+
+  kill -INT -- -"$ANCHOR_PID" 2>/dev/null || true
+  wait "$ANCHOR_PID" 2>/dev/null || true
+  ANCHOR_PID=""
+}
+
+test_serial_connector() {
+  log "testing serial connector"
+
+  log "creating virtual serial ports with socat"
+  socat pty,raw,echo=0,link=/tmp/ttyACM9 pty,raw,echo=0,link=/tmp/ttyOUT 2>/dev/null &
+  SOCAT_PID=$!
+  sleep 2
+
+  if ! kill -0 "$SOCAT_PID" 2>/dev/null; then
+    fail "serial connector: failed to create virtual serial ports"
+    return 1
+  fi
+
+  log "starting anchor with serial connector (override: /tmp/ttyACM9)"
+  setsid ros2 run anchor_pkg anchor --ros-args -p connector:=serial -p serial_override:=/tmp/ttyACM9 &
+  ANCHOR_PID=$!
+  sleep 2
+
+  if ! kill -0 "$ANCHOR_PID" 2>/dev/null; then
+    fail "serial connector: anchor failed to start"
+    kill -INT "$SOCAT_PID" 2>/dev/null || true
+    return 1
+  fi
+
+  if ! wait_for_topic "/anchor/to_vic/relay" 10; then
+    fail "serial connector: topics not available"
+    kill -INT -- -"$ANCHOR_PID" 2>/dev/null || true
+    kill -INT "$SOCAT_PID" 2>/dev/null || true
+    return 1
+  fi
+
+  pass "serial connector: anchor starts with virtual serial"
+
+  # test: relay -> serial output (VicCAN encoding)
+  log "testing relay -> serial output"
+
+  local serial_out_file
+  serial_out_file=$(mktemp)
+
+  # Start head first (blocks waiting for input), then publish
+  timeout 5 head -n1 /tmp/ttyOUT >"$serial_out_file" &
+  local head_pid=$!
+  sleep 0.3
+  ros2 topic pub --once /anchor/to_vic/relay astra_msgs/msg/VicCAN \
+    '{mcu_name: "core", command_id: 30, data: [1.0, 2.0, 3.0, 4.0]}' >/dev/null 2>&1
+  wait $head_pid 2>/dev/null || true
+
+  local serial_out
+  serial_out=$(cat "$serial_out_file")
+  rm -f "$serial_out_file"
+
+  if [[ -n $serial_out ]] && echo "$serial_out" | grep -q "can_relay_tovic,core,30"; then
+    pass "serial connector: relay -> serial output"
+  else
+    fail "serial connector: relay -> serial output (got: $serial_out)"
+  fi
+
+  # test: serial input -> from_vic/core
+  log "testing serial input -> from_vic/core"
+
+  local output
+  output=$(timeout 5 bash -c '
+    ros2 topic echo --once /anchor/from_vic/core &
+    ECHO_PID=$!
+    sleep 0.5
+    echo "can_relay_fromvic,core,15,10.0,20.0,30.0,40.0" > /tmp/ttyOUT
+    sleep 0.5
+    echo "can_relay_fromvic,core,15,10.0,20.0,30.0,40.0" > /tmp/ttyOUT
+    wait $ECHO_PID
+  ' 2>/dev/null) || true
+
+  if echo "$output" | grep -q "mcu_name: core" && echo "$output" | grep -q "command_id: 15"; then
+    pass "serial connector: serial input -> from_vic/core"
+  else
+    fail "serial connector: serial input -> from_vic/core (got: $output)"
+  fi
+
+  # test: relay_string -> debug
+  log "testing relay_string -> debug"
+  output=$(ros_pubsub_test "/anchor/to_vic/debug" "/anchor/to_vic/relay_string" \
+    "std_msgs/msg/String" '{data: \"serial_test_string\"}')
+
+  if [[ -n $output ]] && echo "$output" | grep -q "serial_test_string"; then
+    pass "serial connector: relay_string -> debug"
+  else
+    fail "serial connector: relay_string -> debug"
+  fi
+
+  kill -INT -- -"$ANCHOR_PID" 2>/dev/null || true
+  wait "$ANCHOR_PID" 2>/dev/null || true
+  ANCHOR_PID=""
+  kill -INT "$SOCAT_PID" 2>/dev/null || true
+  wait "$SOCAT_PID" 2>/dev/null || true
+  SOCAT_PID=""
+}
+
+test_can_connector() {
+  log "testing CAN connector"
+
+  log "starting anchor with CAN connector (override: vcan0)"
+  setsid ros2 run anchor_pkg anchor --ros-args -p connector:=can -p can_override:=vcan0 &
+  ANCHOR_PID=$!
+  sleep 2
+
+  if ! kill -0 "$ANCHOR_PID" 2>/dev/null; then
+    fail "CAN connector: anchor failed to start"
+    return 1
+  fi
+
+  if ! wait_for_topic "/anchor/to_vic/relay" 10; then
+    fail "CAN connector: topics not available"
+    kill -INT -- -"$ANCHOR_PID" 2>/dev/null || true
+    return 1
+  fi
+
+  log "anchor started successfully"
+  sleep 1
+
+  # test: relay -> CAN bus
+  # core=1, int16x4=2, cmd=30 -> id = (1<<8)|(2<<6)|30 = 0x19E
+  log "testing relay -> CAN bus"
+
+  local output
+  output=$(timeout 8 bash -c '
+    candump -n 1 vcan0 &
+    DUMP_PID=$!
+    sleep 1
+    ros2 topic pub --once /anchor/to_vic/relay astra_msgs/msg/VicCAN "{mcu_name: \"core\", command_id: 30, data: [1, 2, 3, 4]}" >/dev/null 2>&1
+    sleep 0.5
+    ros2 topic pub --once /anchor/to_vic/relay astra_msgs/msg/VicCAN "{mcu_name: \"core\", command_id: 30, data: [1, 2, 3, 4]}" >/dev/null 2>&1
+    wait $DUMP_PID
+  ' 2>/dev/null) || true
+
+  if echo "$output" | grep -qi "19E"; then
+    pass "CAN connector: relay -> CAN bus"
+  else
+    fail "CAN connector: relay -> CAN bus (got: $output)"
+  fi
+
+  # test: CAN -> from_vic/core
+  log "testing CAN bus -> from_vic/core"
+
+  output=$(timeout 5 bash -c '
+    ros2 topic echo --once /anchor/from_vic/core &
+    ECHO_PID=$!
+    sleep 1
+    cansend vcan0 18F#000A0014001E0028
+    sleep 0.5
+    cansend vcan0 18F#000A0014001E0028
+    wait $ECHO_PID
+  ' 2>/dev/null) || true
+
+  if echo "$output" | grep -q "mcu_name: core" && echo "$output" | grep -q "command_id: 15"; then
+    pass "CAN connector: CAN -> from_vic/core"
+  else
+    fail "CAN connector: CAN -> from_vic/core"
+  fi
+
+  # test: CAN -> from_vic/arm
+  log "testing CAN bus -> from_vic/arm"
+
+  output=$(timeout 5 bash -c '
+    ros2 topic echo --once /anchor/from_vic/arm &
+    ECHO_PID=$!
+    sleep 1
+    cansend vcan0 294#00640096012C01F4
+    sleep 0.5
+    cansend vcan0 294#00640096012C01F4
+    wait $ECHO_PID
+  ' 2>/dev/null) || true
+
+  if echo "$output" | grep -q "mcu_name: arm" && echo "$output" | grep -q "command_id: 20"; then
+    pass "CAN connector: CAN -> from_vic/arm"
+  else
+    fail "CAN connector: CAN -> from_vic/arm"
+  fi
+
+  # test: CAN double data type (data_type_key=0)
+  log "testing CAN double data type"
+
+  output=$(timeout 8 bash -c '
+    ros2 topic echo --once /anchor/from_vic/core &
+    ECHO_PID=$!
+    sleep 1
+    cansend vcan0 105#3FF0000000000000
+    sleep 0.5
+    cansend vcan0 105#3FF0000000000000
+    sleep 0.5
+    cansend vcan0 105#3FF0000000000000
+    wait $ECHO_PID
+  ' 2>/dev/null) || true
+
+  if echo "$output" | grep -q "mcu_name: core" && echo "$output" | grep -q "command_id: 5"; then
+    pass "CAN connector: double data type"
+  else
+    fail "CAN connector: double data type"
+  fi
+
+  # test: CAN float32x2 data type (data_type_key=1)
+  log "testing CAN float32x2 data type"
+
+  output=$(timeout 8 bash -c '
+    ros2 topic echo --once /anchor/from_vic/core &
+    ECHO_PID=$!
+    sleep 1
+    cansend vcan0 14A#3F80000040000000
+    sleep 0.5
+    cansend vcan0 14A#3F80000040000000
+    sleep 0.5
+    cansend vcan0 14A#3F80000040000000
+    wait $ECHO_PID
+  ' 2>/dev/null) || true
+
+  if echo "$output" | grep -q "mcu_name: core" && echo "$output" | grep -q "command_id: 10"; then
+    pass "CAN connector: float32x2 data type"
+  else
+    fail "CAN connector: float32x2 data type"
+  fi
+
+  kill -INT -- -"$ANCHOR_PID" 2>/dev/null || true
+  wait "$ANCHOR_PID" 2>/dev/null || true
+  ANCHOR_PID=""
+}
+
+check_prerequisites() {
+  log "checking prerequisites"
+  local missing=0
+
+  if [[ ! -f install/setup.bash ]]; then
+    fail "install/setup.bash not found; run 'colcon build --symlink-install' first"
+    missing=1
+  fi
+
+  if ! command -v socat &>/dev/null; then
+    fail "socat not found; install it or use 'nix develop'"
+    missing=1
+  fi
+
+  if ! command -v cansend &>/dev/null || ! command -v candump &>/dev/null; then
+    fail "can-utils (cansend/candump) not found; install it or use 'nix develop'"
+    missing=1
+  fi
+
+  if ! ip link show vcan0 &>/dev/null; then
+    fail "vcan0 interface not found"
+    log "  create it with:"
+    log "    sudo ip link add dev vcan0 type vcan"
+    log "    sudo ip link set vcan0 up"
+    missing=1
+  elif ! ip link show vcan0 | grep -q ",UP"; then
+    fail "vcan0 exists but is not UP"
+    log "  enable it with: sudo ip link set vcan0 up"
+    missing=1
+  fi
+
+  if [[ $missing -eq 1 ]]; then
+    echo ""
+    log "prerequisites not met"
+    exit 1
+  fi
+
+  log "all prerequisites met"
+}
+
+main() {
+  echo ""
+  log "anchor connector test suite"
+  echo ""
+
+  check_prerequisites
+
+  log "sourcing ROS2 workspace"
+  source_ros2
+
+  test_mock_connector
+  test_serial_connector
+  test_can_connector
+
+  echo ""
+  log "test summary"
+  echo -e "${BOLD}${GREEN}passed:${NC} $TESTS_PASSED"
+  echo -e "${BOLD}${RED}failed:${NC} $TESTS_FAILED"
+  echo ""
+
+  if [[ $TESTS_FAILED -gt 0 ]]; then
+    exit 1
+  fi
+  exit 0
+}
+
+main "$@"

src/anchor_pkg/anchor_pkg/anchor_node.py

@@ -1,11 +1,9 @@
+from warnings import deprecated
 import rclpy
 from rclpy.node import Node
-from rclpy.executors import ExternalShutdownException
+from rclpy.executors import ExternalShutdownException, SingleThreadedExecutor
 from rcl_interfaces.msg import ParameterDescriptor, ParameterType
 
-import signal
-import atexit
-
 from .connector import (
     Connector,
     MockConnector,
@@ -15,7 +13,6 @@ from .connector import (
     NoWorkingDeviceException,
 )
 from .convert import string_to_viccan, viccan_to_string
-import threading
 
 from astra_msgs.msg import VicCAN
 from std_msgs.msg import String
@@ -37,11 +34,14 @@ class Anchor(Node):
 
     Subscribers:
     * /anchor/from_vic/mock_mcu
-        - For testing without an actual MCU, publish strings here as if they came from an MCU
+        - For testing without an actual MCU, publish VicCAN messages here as if they came from an MCU
     * /anchor/to_vic/relay
         - Core, Arm, and Bio publish VicCAN messages to this topic to send to the MCU
     * /anchor/to_vic/relay_string
         - Send raw strings to connectors. Does not work for connectors that require conversion (like CANConnector)
+    * /anchor/relay
+        - Legacy method for talking to connectors. Takes String as input, but does not send the raw strings to connectors.
+          Instead, it converts them to VicCAN messages first.
     """
 
     connector: Connector
@@ -151,7 +151,7 @@ class Anchor(Node):
         )
         # Debug publisher
         self.tovic_debug_pub_ = self.create_publisher(
-            VicCAN,
+            String,
             "/anchor/to_vic/debug",
             20,
         )
@@ -163,24 +163,32 @@ class Anchor(Node):
             self.write_connector,
             20,
         )
-        self.mock_mcu_sub_ = self.create_subscription(
+        self.tovic_sub_legacy_ = self.create_subscription(
             String,
+            "/anchor/relay",
+            self.write_connector_legacy,
+            20,
+        )
+        self.mock_mcu_sub_ = self.create_subscription(
+            VicCAN,
             "/anchor/from_vic/mock_mcu",
-            self.on_mock_fromvic,
+            self.relay_fromvic,
             20,
         )
         self.tovic_string_sub_ = self.create_subscription(
             String,
             "/anchor/to_vic/relay_string",
-            self.connector.write_raw,
+            self.write_connector_raw,
             20,
         )
 
-        # Close devices on exit
-        atexit.register(self.cleanup)
+        # poll at 100Hz for incoming data
+        self.read_timer_ = self.create_timer(0.01, self.read_connector)
 
-    def cleanup(self):
+    def destroy_node(self):
+        self.get_logger().info("closing connector")
         self.connector.cleanup()
+        super().destroy_node()
 
     def read_connector(self):
         """Check the connector for new data from the MCU, and publish string to appropriate topics"""
@@ -195,42 +203,53 @@ class Anchor(Node):
     def write_connector(self, msg: VicCAN):
         """Write to the connector and send a copy to /anchor/to_vic/debug"""
         self.connector.write(msg)
-        self.tovic_debug_pub_.publish(viccan_to_string(msg))
+        self.tovic_debug_pub_.publish(String(data=viccan_to_string(msg)))
+
+    def write_connector_raw(self, msg: String):
+        """Write raw string to the connector and send a copy to /anchor/to_vic/debug"""
+        self.connector.write_raw(msg)
+        self.tovic_debug_pub_.publish(msg)
+
+    @deprecated(
+        "Use /anchor/to_vic/relay or /anchor/to_vic/relay_string instead of /anchor/relay"
+    )
+    def write_connector_legacy(self, msg: String):
+        """Write to the connector by first attempting to convert String to VicCAN"""
+        # please do not reference this code. ~riley
+        for cmd in msg.data.split("\n"):
+            viccan = string_to_viccan(
+                cmd,
+                "anchor",
+                self.get_logger(),
+                self.get_clock().now().to_msg(),
+            )
+            if viccan:
+                self.write_connector(viccan)
 
     def relay_fromvic(self, msg: VicCAN):
         """Relay a message from the MCU to the appropriate VicCAN topic"""
         if msg.mcu_name == "core":
             self.fromvic_core_pub_.publish(msg)
-        elif msg.mcu_name == "arm" or msg.mcu_name == "digit":
+        if msg.mcu_name == "arm" or msg.mcu_name == "digit":
             self.fromvic_arm_pub_.publish(msg)
-        elif msg.mcu_name == "citadel" or msg.mcu_name == "digit":
+        if msg.mcu_name == "citadel" or msg.mcu_name == "digit":
             self.fromvic_bio_pub_.publish(msg)
 
-    def on_mock_fromvic(self, msg: String):
-        """Relay a message as if it came from the MCU"""
-        viccan = string_to_viccan(
-            msg.data,
-            "mock",
-            self.get_logger(),
-            self.get_clock().now().to_msg(),
-        )
-        if viccan:
-            self.relay_fromvic(viccan)
-
 
 def main(args=None):
+    rclpy.init(args=args)
+    anchor_node = Anchor()
+    executor = SingleThreadedExecutor()
+    executor.add_node(anchor_node)
+
     try:
-        rclpy.init(args=args)
-        anchor_node = Anchor()
-
-        thread = threading.Thread(target=rclpy.spin, args=(anchor_node,), daemon=True)
-        thread.start()
-
-        rate = anchor_node.create_rate(100)  # 100 Hz -- arbitrary rate
-        while rclpy.ok():
-            anchor_node.read_connector()  # Check the connector for updates
-            rate.sleep()
+        executor.spin()
     except (KeyboardInterrupt, ExternalShutdownException):
-        print("Caught shutdown signal, shutting down...")
+        pass
     finally:
+        # don't accept any more jobs
+        executor.shutdown()
+        # make the node quit processing things
+        anchor_node.destroy_node()
+        # shut down everything else
         rclpy.try_shutdown()

src/anchor_pkg/anchor_pkg/connector.py

@@ -1,5 +1,6 @@
 from abc import ABC, abstractmethod
 from astra_msgs.msg import VicCAN
+from std_msgs.msg import String
 from rclpy.clock import Clock
 from rclpy.impl.rcutils_logger import RcutilsLogger
 from .convert import string_to_viccan as _string_to_viccan, viccan_to_string
@@ -21,6 +22,16 @@ KNOWN_USBS = [
 ]
 BAUD_RATE = 115200
 
+MCU_IDS = [
+    "broadcast",
+    "core",
+    "arm",
+    "digit",
+    "faerie",
+    "citadel",
+    "libs",
+]
+
 
 class NoValidDeviceException(Exception):
     pass
@@ -67,7 +78,7 @@ class Connector(ABC):
         pass
 
     @abstractmethod
-    def write_raw(self, msg: str):
+    def write_raw(self, msg: String):
         pass
 
     def cleanup(self):
@@ -189,10 +200,10 @@ class SerialConnector(Connector):
             return (None, None)  # pretty much no other error matters
 
     def write(self, msg: VicCAN):
-        self.write_raw(viccan_to_string(msg))
+        self.write_raw(String(data=viccan_to_string(msg)))
 
-    def write_raw(self, msg: str):
-        self.serial_interface.write(bytes(msg, "utf8"))
+    def write_raw(self, msg: String):
+        self.serial_interface.write(bytes(msg.data, "utf8"))
 
     def cleanup(self):
         self.logger.info(f"closing serial port if open {self.port}")
@@ -217,6 +228,7 @@ class CANConnector(Connector):
 
         # filter to busses whose channel matches the can_override
         if can_override:
+            self.logger.info(f"overrode can interface with {can_override}")
             avail = list(
                 filter(
                     lambda b: b.get("channel") == can_override,
@@ -246,7 +258,7 @@ class CANConnector(Connector):
             )
 
         if self.can_channel and self.can_channel.startswith("v"):
-            self.logger.warn("likely using virtual CAN interface")
+            self.logger.warn("CAN interface is likely virtual")
 
     def read(self) -> tuple[VicCAN | None, str | None]:
         if not self.can_bus:
@@ -268,17 +280,9 @@ class CANConnector(Connector):
         data_type_key = (arbitration_id >> 6) & 0b11
         command = arbitration_id & 0x3F
 
-        key_to_mcu: dict[int, str] = {
-            1: "broadcast",
-            2: "core",
-            3: "arm",
-            4: "digit",
-            5: "faerie",
-            6: "citadel",
-        }
-
-        mcu_name = key_to_mcu.get(mcu_key)
-        if mcu_name is None:
+        try:
+            mcu_name = MCU_IDS[mcu_key]
+        except IndexError:
             self.logger.warn(
                 f"received CAN frame with unknown MCU key {mcu_key}; id=0x{arbitration_id:X}"
             )
@@ -295,7 +299,7 @@ class CANConnector(Connector):
                         f"received double payload with insufficient length {len(data_bytes)}; dropping frame"
                     )
                     return (None, None)
-                (value,) = struct.unpack("<d", data_bytes[:8])
+                (value,) = struct.unpack(">d", data_bytes[:8])
                 data = [float(value)]
             elif data_type_key == 1:
                 if len(data_bytes) < 8:
@@ -303,7 +307,7 @@ class CANConnector(Connector):
                         f"received float32x2 payload with insufficient length {len(data_bytes)}; dropping frame"
                     )
                     return (None, None)
-                v1, v2 = struct.unpack("<ff", data_bytes[:8])
+                v1, v2 = struct.unpack(">ff", data_bytes[:8])
                 data = [float(v1), float(v2)]
             elif data_type_key == 2:
                 if len(data_bytes) < 8:
@@ -311,7 +315,7 @@ class CANConnector(Connector):
                         f"received int16x4 payload with insufficient length {len(data_bytes)}; dropping frame"
                     )
                     return (None, None)
-                i1, i2, i3, i4 = struct.unpack("<hhhh", data_bytes[:8])
+                i1, i2, i3, i4 = struct.unpack(">hhhh", data_bytes[:8])
                 data = [float(i1), float(i2), float(i3), float(i4)]
             else:
                 self.logger.warn(
@@ -343,92 +347,55 @@ class CANConnector(Connector):
         if not self.can_bus:
             raise DeviceClosedException("CAN bus not initialized")
 
-        # Build 11-bit arbitration ID according to the VicCAN scheme:
+        # build 11-bit arbitration ID according to VicCAN spec:
         # bits 10..8: targeted MCU key
         # bits 7..6:  data type key
         # bits 5..0:  command
 
-        # Map MCU name to 3-bit key.
-        mcu_name = (msg.mcu_name or "").lower()
-        mcu_key_map: dict[str, int] = {
-            "broadcast": 1,
-            "core": 2,
-            "arm": 3,
-            "digit": 4,
-            "faerie": 5,
-            "citadel": 6,
-        }
-
-        if mcu_name not in mcu_key_map:
+        # map MCU name to 3-bit key.
+        try:
+            mcu_id = MCU_IDS.index((msg.mcu_name or "").lower())
+        except ValueError:
             self.logger.error(
                 f"unknown VicCAN mcu_name '{msg.mcu_name}' for CAN frame; dropping message"
             )
             return
 
-        mcu_key = mcu_key_map[mcu_name] & 0b111
-
-        # Infer data type key from payload length according to the table:
+        # determine data type from length:
         # 0: double x1, 1: float32 x2, 2: int16 x4, 3: empty
-        data_len = len(msg.data)
-        if data_len == 0:
-            data_type_key = 3
-        elif data_len == 1:
-            data_type_key = 0
-        elif data_len == 2:
-            data_type_key = 1
-        elif data_len == 4:
-            data_type_key = 2
-        else:
-            # Fallback: treat any other non-zero length as float32 x2
-            self.logger.warn(
-                f"unexpected VicCAN data length {data_len}; encoding as float32 x2 (key=1) and truncating/padding as needed"
-            )
-            data_type_key = 1
-
-        # Command is limited to 6 bits.
-        command = int(msg.command_id)
-        if command < 0:
-            self.logger.error(f"invalid negative command_id for CAN frame: {command}")
-            return
-        if command > 0x3F:
-            self.logger.warn(
-                f"command_id 0x{command:X} exceeds 6-bit range; truncating to lower 6 bits"
-            )
-            command &= 0x3F
-
-        arbitration_id = (
-            ((mcu_key & 0b111) << 8) | ((data_type_key & 0b11) << 6) | (command & 0x3F)
-        )
-
-        # Map VicCAN.data (floats) to up to 8 CAN data bytes.
-        raw_bytes: list[int] = []
-        for value in msg.data:
-            try:
-                b = int(round(value))
-            except (TypeError, ValueError):
+        match data_len := len(msg.data):
+            case 0:
+                data_type = 3
+                data = bytes()
+            case 1:
+                data_type = 0
+                data = struct.pack(">d", *msg.data)
+            case 2:
+                data_type = 1
+                data = struct.pack(">ff", *msg.data)
+            case 3 | 4:  # 3 gets treated as 4
+                data_type = 2
+                if data_len == 3:
+                    msg.data.append(0)
+                data = struct.pack(">hhhh", *[int(x) for x in msg.data])
+            case _:
                 self.logger.error(
-                    f"non-numeric VicCAN data value: {value}; dropping message"
+                    f"unexpected VicCAN data length: {data_len}; dropping message"
                 )
                 return
 
-            if b < 0 or b > 255:
-                self.logger.warn(
-                    f"VicCAN data value {value} out of byte range; clamping into [0, 255]"
-                )
-                b = max(0, min(255, b))
-
-            raw_bytes.append(b)
-
-        if len(raw_bytes) > 8:
-            self.logger.warn(
-                f"VicCAN data too long for single CAN frame ({len(raw_bytes)} > 8); truncating"
+        # command is limited to 6 bits.
+        command = int(msg.command_id)
+        if command < 0 or command > 0x3F:
+            self.logger.error(
+                f"invalid command_id for CAN frame: {command}; dropping message"
             )
-            raw_bytes = raw_bytes[:8]
+            return
 
         try:
             can_message = can.Message(
-                arbitration_id=arbitration_id,
-                data=raw_bytes,
+                arbitration_id=(mcu_id << 8) | (data_type << 6) | command,
+                data=data,
                 is_extended_id=False,
             )
         except Exception as e:
@@ -445,8 +412,10 @@ class CANConnector(Connector):
             self.logger.error(f"CAN error while sending: {e}")
             raise DeviceClosedException("CAN bus closed unexpectedly")
 
-    def write_raw(self, msg: str):
-        self.logger.warn(f"write_raw is not supported for CANConnector. msg: {msg}")
+    def write_raw(self, msg: String):
+        self.logger.warn(
+            f"write_raw is not supported for CANConnector. msg: {msg.data}"
+        )
 
     def cleanup(self):
         try:
@@ -468,5 +437,5 @@ class MockConnector(Connector):
     def write(self, msg: VicCAN):
         pass
 
-    def write_raw(self, msg: str):
+    def write_raw(self, msg: String):
         pass

src/anchor_pkg/anchor_pkg/convert.py

@@ -16,7 +16,7 @@ def string_to_viccan(
     parts: list[str] = msg.strip().split(",")
 
     # don't need an extra check because len of .split output is always >= 1
-    if parts[0] != "can_relay_fromvic":
+    if not parts[0].startswith("can_relay_"):
         logger.debug(f"got non-CAN data from {mcu_name}: {msg}")
         return None
     elif len(parts) < 3:
@@ -57,6 +57,9 @@ def string_to_viccan(
 
 def viccan_to_string(viccan: VicCAN) -> str:
     """Converts a ROS2 VicCAN message to the serial string VicCAN format."""
+    # make sure we accept 3 digits and treat it as 4
+    if len(viccan.data) == 3:
+        viccan.data.append(0)
     # go from [ w, x, y, z ] -> ",w,x,y,z" & round to 7 digits max
     data = "".join([f",{round(val,7)}" for val in viccan.data])
-    return f"can_relay_tovic,{viccan.mcu_name}{data}\n"
+    return f"can_relay_tovic,{viccan.mcu_name},{viccan.command_id}{data}\n"

src/anchor_pkg/launch/rover.launch.py

@@ -33,7 +33,7 @@ def generate_launch_description():
     ld.add_action(
         DeclareLaunchArgument(
             "can_override",
-            default_value="auto",
+            default_value="",
             description="CAN network override parameter for anchor node (default: '')",
         )
     )

src/core_pkg/core_pkg/core_ptz.py

@@ -262,7 +262,7 @@ class PtzNode(Node):
             f"[{self.get_clock().now().nanoseconds / 1e9:.2f}] PTZ Node: {message_text}"
         )
         self.debug_pub.publish(msg)
-        self.get_logger().info(message_text)
+        self.get_logger().debug(message_text)
 
     def run_async_func(self, coro):
         """Run an async function in the event loop."""

treefmt.nix

@@ -1,8 +1,9 @@
-{ pkgs, ... }:
+{ ... }:
 {
   projectRootFile = "flake.nix";
   programs = {
     nixfmt.enable = true;
     black.enable = true;
+    shfmt.enable = true;
   };
 }