update README with mock connector instructions

Headless too

.gitignore

@@ -14,3 +14,4 @@ __pycache__/
 
 #Direnv
 .direnv/
+.venv

.gitmodules

@@ -1,6 +1,6 @@
-[submodule "src/ros2_interfaces_pkg"]
-	path = src/ros2_interfaces_pkg
-	url = ../ros2_interfaces_pkg
 [submodule "src/astra_description"]
 	path = src/astra_descriptions
 	url = ../astra_descriptions
+[submodule "src/astra_msgs"]
+	path = src/astra_msgs
+	url = git@github.com:SHC-ASTRA/astra_msgs.git

README.md

@@ -1,89 +1,233 @@
-# rover-ros2
+# ASTRA Rover ROS2 Packages
 
 [![License: AGPL v3](https://img.shields.io/badge/License-AGPL_v3-blue.svg)](https://www.gnu.org/licenses/agpl-3.0)
 
-Submodule which includes all ros2 packages for the rover. These are centrally located for modular rover operation.
+Includes all main ROS2 packages for the rover. These are centrally located for modular rover operation.
 
-You will use this package to launch any module-side ROS2 nodes.
-<br>
+You will use these packages to launch all rover-side ROS2 nodes.
 
-## Software Pre-reqs
+## Table of Contents
 
-An acting base station computer will need several things:
+- [Software Prerequisites](#software-prerequisites)
+  - [Nix](#nix)
+  - [ROS2 Humble + rosdep](#ros2-humble--rosdep)
+- [Running](#running)
+  - [Testing Serial](#testing-serial)
+  - [Connecting the GuliKit Controller](#connecting-the-gulikit-controller)
+- [Common Problems/Toubleshooting](#common-problemstroubleshooting)
+- [Packages](#packages)
+- [Graphs](#graphs)
+  - [Full System](#full-system)
+  - [Individual Nodes](#individual-nodes)
+- [Maintainers](#maintainers)
 
-* ROS2 Humble
-    * Follow the standard ROS2 humble install process. Linux recommended.
-        * https://docs.ros.org/en/humble/Installation.html
-* Colcon
-    * `$ sudo apt update`
-    * `$ sudo apt install python3-colcon-common-extensions`
-* Configured Static IP for Ubiquiti bullet (Process varies by OS)
-    * IP Address: 192.168.1.x
-        * This can be just about anything not already in use. I recommend something 30-39
-    * Net Mask: 255.255.255.0
-    * Gateway: 192.168.1.0
+## Software Prerequisites
 
-## Launching with ANCHOR
+You need either [ROS2 Humble](https://docs.ros.org/en/humble/index.html)
+with [rosdep](https://docs.ros.org/en/humble/Tutorials/Intermediate/Rosdep.html#rosdep-installation)
+or [Nix](https://nixos.org/download/#nix-install-linux) installed. We recommend
+using Nix.
 
-ANCHOR (Active Node Controller Hub and Operational Relay)
-Allows for launching all nodes on the rover simulataneously. Additionally, all controls will run through the core's NUC and MCU.
-<br>
-1. SSH to core
-    * Core1: `ssh clucky@192.168.1.69`
-    * Core2: `ssh clucky@192.168.1.70`
-    * Password: \<can be found in the rover-Docs repo under documentation>
-2. Navigate to rover-ros2 workspace
-    * `cd rover-ros2`
-3. Source the workspace
-    * `source install/setup.bash`
-4. Launch ANCHOR
-    * `ros2 launch rover_launch.py mode:=anchor`
+### Nix
 
-## Launching as Standalone
+With Nix, all you have to do is enter the development shell:
 
-For use when running independent modules through their respective computers (pi/NUC) without ANCHOR.
+```bash
+$ cd path/to/rover-ros2
+$ nix develop
+```
 
-1. SSH to the the module's computer
-    * Core1: `ssh clucky@192.168.1.69`
-    * Core2: `ssh clucky@192.168.1.70`
-    * Arm: `ssh arm@192.168.1.70`
-    * Bio: \<TBD>
-    * Password: \<can be found in the rover-Docs repo under documentation>
-2. Run the main node (this sends commands to the MCU)
-    * Navigate to the rover-ros2 workspace (location may vary)
-        * `cd rover-ros2`
-    * Source the workspace
-        * `source install/setup.bash`
-    * Start the node
-        * ARM: `ros2 launch rover_launch.py mode:=arm`
-        * CORE: `ros2 launch rover_launch.py mode:=core`
-        * BIO: `ros2 launch rover_launch.py mode:=bio`
+### ROS2 Humble + rosdep
 
-## Running Headless
+With ROS2 Humble, start by using rosdep to install dependencies:
 
-Headless control nodes (for ARM and CORE) allow running of the module on-rover without the operator having ROS2 installed on their machine. You will need a laptop to connect to the pi/NUC in order to launch headless but it can be disconnected after the nodes are spun up.
-<br>
-1. SSH to the the module's computer
-    * Core1: `ssh clucky@192.168.1.69`
-    * Core2: `ssh clucky@192.168.1.70`
-    * Arm: `ssh arm@192.168.1.70`
-    * Password: \<can be found in the rover-Docs repo under documentation>
-2. Run the  headless node
-    * You must have ANCHOR or the module's Standalone node running
-    * Open a new terminal (SSH'd to the module)
-    * Navigate to rover-ros2 workspace
-        * `cd rover-ros2`
-    * Source the workspace
-        * `source install/setup.bash`
-    * Run the node (ensure controller is connected and on x-input mode)
-        * CORE: `ros2 run core_pkg headless`
-        * ARM: `ros2 run arm_pkg headless`
+```bash
+  # Setup rosdep
+$ sudo rosdep init  # only run if you haven't already
+$ rosdep update
+  # Install dependencies
+$ cd path/to/rover-ros2
+$ rosdep install --from-paths src -y --ignore-src
+```
 
-## Connecting the GuliKit Controller
+## Running
 
-Connecting the GuliKit Controller (Recommended)
+```bash
+$ colcon build
+$ source install/setup.bash
+  # main launch files:
+$ ros2 launch anchor_pkg rover.launch.py  # Must be run on a computer connected to a MCU on the rover.
+$ ros2 run headless_pkg headless_full  # Optionally run in a separate shell on the same or different computer.
+```
 
-* Connect controller to pc with USB-C
+### Using the Mock Connector
+
+Anchor provides a mock connector meant for testing and scripting purposes. You can select the mock connector by running anchor with this command:
+
+```bash
+$ ros2 launch anchor_pkg rover.launch.py connector:="mock"
+```
+
+You can see all data sent to it in a string format with this command:
+
+```bash
+$ ros2 topic echo /anchor/to_vic/debug
+```
+
+To send data to it, use the normal topic:
+
+```bash
+$ ros2 topic pub /anchor/to_vic/relay astra_msgs/msg/VicCAN '{mcu_name: "core", command_id: 50, data: [0.0, 2.0, 0.0, 1.0]}'
+
+```
+
+To emulate receiving data from a microcontroller, publish to the dedicated topic:
+
+```bash
+$ ros2 topic pub /anchor/from_vic/mock_mcu std_msgs/msg/String '{data: "can_relay_fromvic,arm,55,0.0,450.0,900.0,0.0"}'
+```
+
+### Testing Serial
+
+You can fake the presence of a Serial device (i.e., MCU) by using the following command:
+
+```bash
+$ socat -dd -v pty,rawer,crnl,link=/tmp/ttyACM9 pty,rawer,crnl,link=/tmp/ttyOUT
+```
+
+When you go to run anchor, use the `serial_override` ROS2 parameter to point it to the fake serial port, like so:
+
+```bash
+$ ros2 launch anchor_pkg rover.launch.py connector:=serial serial_override:=/tmp/ttyACM9
+```
+
+### Testing CAN
+
+You can create a virtual CAN network by using the following commands to create and then enable it:
+
+```bash
+sudo ip link add dev vcan0 type vcan
+sudo ip link set vcan0 up
+```
+
+When you go to run anchor, use the `can_override` ROS2 parameter to point it to the virtual CAN network, like so:
+
+```bash
+$ ros2 launch anchor_pkg rover.launch.py connector:=can can_override:=vcan0
+```
+
+Once you're done, you should delete the virtual network so that anchor doesn't get confused if you plug in a real CAN adapter:
+
+```bash
+$ sudo ip link delete vcan0
+```
+
+### Connecting the GuliKit Controller
+
+These instructions apply to the black XBox-style GuliKit controller, primarily used for controlling Arm through Basestation.
+
+* Connect the controller to your PC with a USB-C cable
 * Select the "X-Input" control mode (Windows logo) on the controller.
-* Hold the button next to the symbols (windows, android, switch, etc...)
-* You'll need to release the button and press down again to cycle to the next mode
+  * Hold the button next to the symbols (windows, android, switch, etc...)
+  * You'll need to release the button and press down again to cycle to the next mode
+
+## Common Problems/Troubleshooting
+
+**Q**: When I try to launch the nodes, I receive a `package '' not found` error.
+
+A: Make sure you have sourced the workspace in the current shell:
+
+```bash
+$ source install/setup.bash  # or setup.zsh if using ZSH
+```
+
+**Q**: When I try to launch the nodes, I receive several `FileNotFoundError: [Errno 2]` errors.
+
+A: Sometimes the install files get messed up by running `colcon build` in different shells or updating packages. Try running the following commands to clean up your local build files:
+
+```bash
+$ rm -rf build/ install/
+$ colcon build
+```
+
+**Q**: When I run `colcon build` after the above suggestion, I receive several of the following errors:
+
+```bash
+[0.557s] WARNING:colcon.colcon_ros.prefix_path.ament:The path '' in the environment variable AMENT_PREFIX_PATH doesn't exist
+```
+
+A: Don't worry about it. If you had the workspace sourced, ROS2 will complain about the workspace install files not existing anymore after you deleted them. They will be re-created by `colcon build`, after which you can run `source install/setup.bash` to source the new install files.
+
+**Q**: When I try to launch Anchor, I receive the following errors:
+
+```bash
+[anchor-5] [INFO] [1762239452.937881841] [anchor]: Unable to find MCU...
+...
+[ERROR] [anchor-5]: process has died [pid 101820, exit code 1, cmd '.../rover-ros2/install/anchor_pkg/lib/anchor_pkg/anchor --ros-args -r __node:=anchor --params-file /tmp/launch_params_nmv6tpw4'].
+[INFO] [launch]: process[anchor-5] was required: shutting down launched system
+[INFO] [bio-4]: sending signal 'SIGINT' to process[bio-4]
+[INFO] [ptz-3]: sending signal 'SIGINT' to process[ptz-3]
+[INFO] [core-2]: sending signal 'SIGINT' to process[core-2]
+[INFO] [arm-1]: sending signal 'SIGINT' to process[arm-1]
+...
+```
+
+A: To find a microcontroller to talk to, Anchor sends a ping to every Serial port on your computer. If it does not receive a 'pong' in less than one second, then it aborts. There are a few possible fixes:
+
+- Keep trying to run it until it works
+- Run `lsusb` to see if the microcontroller is detected by your computer.
+- Run `ls /dev/tty*0` to see if there is a valid Serial port enumerated for the microcontroller.
+- Check if you are in the `dialout` group (or whatever group shows up by running `ls -l /dev/tty*`).
+
+## Packages
+
+- [anchor\_pkg](./src/anchor_pkg) - Handles Serial communication between the various other packages here and the microcontroller.
+- [arm\_pkg](./src/arm_pkg) - Relays controls and sensor data for the arm (socket and digit) between anchor and basestation/headless.
+- [astra\_descriptions](./src/astra_descriptions) - Submodule with URDF-related packages.
+- [bio\_pkg](./src/bio_pkg) - Like arm_pkg, but for CITADEL and FAERIE
+- [core\_pkg](./src/core_pkg) - Like arm_pkg, but for Core
+- [headless\_pkg](./src/headless_pkg) - Simple, non-graphical controller node to work in place of basestation when controlling the rover by itself. This is autostarted with anchor to allow for setup-less control of the rover.
+- [latency\_tester](./src/latency_tester) - A temporary node to test comms latency over ROS2, Serial, and CAN.
+- [ros2\_interfaces\_pkg](./src/ros2_interfaces_pkg) - Contains custom message types for communication between basestation and the rover over ROS2. (being renamed to `astra_msgs`).
+- [servo\_arm\_twist\_pkg](./src/servo_arm_twist_pkg) - A temporary node to translate controller state from `ros2_joy` to `Twist` messages to control the Arm via IK.
+
+## Graphs
+
+### Full System
+
+> **Anchor stand-alone** (`ros2 launch anchor_pkg rover.launch.py`)
+>
+> ![rqt_graph of Anchor by itself, ran with command: ros2 launch anchor_pkg rover.launch.py](./docs-resources/graph-anchor-standalone.png)
+
+> **Anchor with [basestation-classic](https://github.com/SHC-ASTRA/basestation-classic)**
+>
+> ![rqt_graph of Anchor ran with the same command as above, talking to basestation-classic](./docs-resources/graph-anchor-w-basestation-classic.png)
+
+> **Anchor with Headless** (`ros2 run headless_pkg headless_full`)
+>
+> ![rqt_graph of Anchor ran with Headless](./docs-resources/graph-anchor-w-headless.png)
+
+### Individual Nodes
+
+> **Anchor** (`ros2 run anchor_pkg anchor`)
+>
+> ![rqt_graph of Anchor node running by itself](./docs-resources/graph-anchor-anchor-standalone.png)
+
+> **Core** (`ros2 run core_pkg core --ros-args -p launch_mode:=anchor`)
+>
+> ![rqt_graph of Core node running by itself](./docs-resources/graph-anchor-core-standalone.png)
+
+> **Arm** (`ros2 run arm_pkg arm --ros-args -p launch_mode:=anchor`)
+>
+> ![rqt_graph of Arm node running by itself](./docs-resources/graph-anchor-arm-standalone.png)
+
+> **Bio** (`ros2 run bio_pkg bio --ros-args -p launch_mode:=anchor`)
+>
+> ![rqt_graph of Bio node running by itself](./docs-resources/graph-anchor-bio-standalone.png)
+
+## Maintainers
+
+| Name | Email | Discord |
+| ---- | ----- | ------- |
+| David Sharpe | <ds0196@uah.edu> | `@ddavdd` |
+| Riley McLain | <rjm0037@uah.edu> | `@ryleu` |

auto_start/auto_start_anchor.sh

@@ -1,4 +1,7 @@
-#!/bin/bash
+#!/usr/bin/env bash
+set -e
+
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
 
 # Wait for a network interface to be up (not necessarily online)
 while ! ip link show | grep -q "state UP"; do
@@ -12,13 +15,14 @@ echo "[INFO] Network interface is up!"
 echo "[INFO] Starting ROS node..."
 
 # Source ROS 2 Humble setup script
-source /opt/ros/humble/setup.bash
+if command -v nixos-rebuild; then
+    echo "[INFO] running on NixOS"
+else
+    source /opt/ros/humble/setup.bash
+fi
 
 # Source your workspace setup script
-source /home/clucky/rover-ros2/install/setup.bash
-
-# CD to directory
-cd /home/clucky/rover-ros2/
+source $SCRIPT_DIR/../install/setup.bash
 
 # Launch the ROS 2 node with the desired mode
 ros2 launch anchor_pkg rover.launch.py mode:=anchor

auto_start/auto_start_core_headless.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-
-# Wait for a network interface to be up (not necessarily online)
-while ! ip link show | grep -q "state UP"; do
-    echo "[INFO] Waiting for active network interface..."
-    sleep 1
-done
-
-echo "[INFO] Network interface is up!"
-
-# Your actual ROS node start command goes here
-echo "[INFO] Starting ROS node..."
-
-# Source ROS 2 Humble setup script
-source /opt/ros/humble/setup.bash
-
-# Source your workspace setup script
-source /home/clucky/rover-ros2/install/setup.bash
-
-# CD to directory
-cd /home/clucky/rover-ros2/
-
-# Launch the ROS 2 node
-ros2 run core_pkg headless

auto_start/auto_start_headless_full.sh

@@ -1,4 +1,7 @@
-#!/bin/bash
+#!/usr/bin/env bash
+set -e
+
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
 
 # Wait for a network interface to be up (not necessarily online)
 while ! ip link show | grep -q "state UP"; do
@@ -12,13 +15,14 @@ echo "[INFO] Network interface is up!"
 echo "[INFO] Starting ROS node..."
 
 # Source ROS 2 Humble setup script
-source /opt/ros/humble/setup.bash
+if command -v nixos-rebuild; then
+    echo "[INFO] running on NixOS"
+else
+    source /opt/ros/humble/setup.bash
+fi
 
 # Source your workspace setup script
-source /home/clucky/rover-ros2/install/setup.bash
-
-# CD to directory
-cd /home/clucky/rover-ros2/
+source $SCRIPT_DIR/../install/setup.bash
 
 # Launch the ROS 2 node
 ros2 run headless_pkg headless_full

auto_start/start_rosbag.sh

@@ -1,8 +1,12 @@
-#!/bin/bash
+#!/usr/bin/env bash
+set -e
 
-ANCHOR_WS="/home/clucky/rover-ros2"
-AUTONOMY_WS="/home/clucky/rover-Autonomy"
-BAG_LOCATION="/home/clucky/bags/autostart"
+SCRIPT_DIR=$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )
+
+[[ -z "$ANCHOR_WS" ]] && ANCHOR_WS="$SCRIPT_DIR/.."
+[[ -z "$AUTONOMY_WS" ]] && AUTONOMY_WS="$HOME/rover-Autonomy"
+BAG_LOCATION="$HOME/bags/autostart"
+[[ ! -d "$BAG_LOCATION" ]] && mkdir -p "$BAG_LOCATION"
 
 # Wait for a network interface to be up (not necessarily online)
 while ! ip link show | grep -q "state UP"; do
@@ -13,9 +17,13 @@ done
 echo "[INFO] Network interface is up!"
 
 
-source /opt/ros/humble/setup.bash
+if command -v nixos-rebuild; then
+    echo "[INFO] running on NixOS"
+else
+    source /opt/ros/humble/setup.bash
+fi
 source $ANCHOR_WS/install/setup.bash
-[ -f $AUTONOMY_WS/install/setup.bash ] && source $AUTONOMY_WS/install/setup.bash
+[[ -f $AUTONOMY_WS/install/setup.bash ]] && source $AUTONOMY_WS/install/setup.bash
 
 cd $BAG_LOCATION
 

flake.lock

@@ -24,27 +24,27 @@
         "nixpkgs": "nixpkgs"
       },
       "locked": {
-        "lastModified": 1758094726,
-        "narHash": "sha256-agLnClczRtYY+kQFh5dv4wGNhtFNKK7KFOmypDhsWCs=",
+        "lastModified": 1770108954,
+        "narHash": "sha256-VBj6bd4LPPSfsZJPa/UPPA92dOs6tmQo0XZKqfz/3W4=",
         "owner": "lopsided98",
         "repo": "nix-ros-overlay",
-        "rev": "9d0557032aadb65df065b1972a632572b57234b5",
+        "rev": "3d05d46451b376e128a1553e78b8870c75d7753a",
         "type": "github"
       },
       "original": {
         "owner": "lopsided98",
-        "ref": "master",
+        "ref": "develop",
         "repo": "nix-ros-overlay",
         "type": "github"
       }
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1744849697,
-        "narHash": "sha256-S9hqvanPSeRu6R4cw0OhvH1rJ+4/s9xIban9C4ocM/0=",
-        "owner": "lopsided98",
+        "lastModified": 1759381078,
+        "narHash": "sha256-gTrEEp5gEspIcCOx9PD8kMaF1iEmfBcTbO0Jag2QhQs=",
+        "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "6318f538166fef9f5118d8d78b9b43a04bb049e4",
+        "rev": "7df7ff7d8e00218376575f0acdcc5d66741351ee",
         "type": "github"
       },
       "original": {
@@ -60,7 +60,8 @@
         "nixpkgs": [
           "nix-ros-overlay",
           "nixpkgs"
-        ]
+        ],
+        "treefmt-nix": "treefmt-nix"
       }
     },
     "systems": {
@@ -77,6 +78,26 @@
         "repo": "default",
         "type": "github"
       }
+    },
+    "treefmt-nix": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1773297127,
+        "narHash": "sha256-6E/yhXP7Oy/NbXtf1ktzmU8SdVqJQ09HC/48ebEGBpk=",
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "rev": "71b125cd05fbfd78cab3e070b73544abe24c5016",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "treefmt-nix",
+        "type": "github"
+      }
     }
   },
   "root": "root",

flake.nix

@@ -2,8 +2,13 @@
   description = "Development environment for ASTRA Anchor";
 
   inputs = {
-    nix-ros-overlay.url = "github:lopsided98/nix-ros-overlay/master";
+    nix-ros-overlay.url = "github:lopsided98/nix-ros-overlay/develop";
     nixpkgs.follows = "nix-ros-overlay/nixpkgs"; # IMPORTANT!!!
+
+    treefmt-nix = {
+      url = "github:numtide/treefmt-nix";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
   };
 
   outputs =
@@ -11,7 +16,8 @@
       self,
       nix-ros-overlay,
       nixpkgs,
-    }:
+      ...
+    }@inputs:
     nix-ros-overlay.inputs.flake-utils.lib.eachDefaultSystem (
       system:
       let
@@ -25,9 +31,10 @@
           name = "ASTRA Anchor";
           packages = with pkgs; [
             colcon
-            (python312.withPackages (
+            (python313.withPackages (
               p: with p; [
                 pyserial
+                python-can
                 pygame
                 scipy
                 crccheck
@@ -53,7 +60,26 @@
                   robot-state-publisher
                   ros2-control
                   controller-manager
-                  # ros2-controllers nixpkg does not build :(
+                  control-msgs
+                  control-toolbox
+                  moveit-core
+                  moveit-planners
+                  moveit-common
+                  moveit-msgs
+                  moveit-ros-planning
+                  moveit-ros-planning-interface
+                  moveit-ros-visualization
+                  moveit-configs-utils
+                  moveit-ros-move-group
+                  moveit-servo
+                  moveit-simple-controller-manager
+                  topic-based-ros2-control
+                  pilz-industrial-motion-planner
+                  pick-ik
+                  ompl
+                  joy
+                  ros2-controllers
+                  chomp-motion-planner
                 ];
               }
             )
@@ -64,6 +90,8 @@
             export QT_X11_NO_MITSHM=1
           '';
         };
+
+        formatter = (inputs.treefmt-nix.lib.evalModule pkgs ./treefmt.nix).config.build.wrapper;
       }
     );
 

src/anchor_pkg/anchor_pkg/anchor_node.py

@@ -1,255 +1,259 @@
+from warnings import deprecated
 import rclpy
 from rclpy.node import Node
-from std_srvs.srv import Empty
+from rclpy.executors import ExternalShutdownException
+from rcl_interfaces.msg import ParameterDescriptor, ParameterType
 
-import signal
-import time
 import atexit
 
-import serial
-import os
-import sys
+from .connector import (
+    Connector,
+    MockConnector,
+    SerialConnector,
+    CANConnector,
+    NoValidDeviceException,
+    NoWorkingDeviceException,
+)
+from .convert import string_to_viccan
 import threading
-import glob
 
-from std_msgs.msg import String, Header
-from ros2_interfaces_pkg.msg import VicCAN
-
-serial_pub = None
-thread = None
+from astra_msgs.msg import VicCAN
+from std_msgs.msg import String
 
 
-"""
-Publishers:
-  * /anchor/from_vic/debug
-    - Every string received from the MCU is published here for debugging
-  * /anchor/from_vic/core
-    - VicCAN messages for Core node
-  * /anchor/from_vic/arm
-    - VicCAN messages for Arm node
-  * /anchor/from_vic/bio
-    - VicCAN messages for Bio node
+class Anchor(Node):
+    """
+    Publishers:
+    * /anchor/from_vic/debug
+        - Every string received from the MCU is published here for debugging
+    * /anchor/from_vic/core
+        - VicCAN messages for Core node
+    * /anchor/from_vic/arm
+        - VicCAN messages for Arm node
+    * /anchor/from_vic/bio
+        - VicCAN messages for Bio node
+    * /anchor/to_vic/debug
+        - A string copy of the messages published to ./relay are published here
+
+    Subscribers:
+    * /anchor/from_vic/mock_mcu
+        - For testing without an actual MCU, publish strings here as if they came from an MCU
+    * /anchor/to_vic/relay
+        - Core, Arm, and Bio publish VicCAN messages to this topic to send to the MCU
+    * /anchor/to_vic/relay_string
+        - Send raw strings to connectors. Does not work for connectors that require conversion (like CANConnector)
+    * /anchor/relay
+        - Legacy method for talking to connectors. Takes String as input, but does not send the raw strings to connectors.
+          Instead, it converts them to VicCAN messages first.
+    """
+
+    connector: Connector
 
-Subscribers:
-  * /anchor/from_vic/mock_mcu
-    - For testing without an actual MCU, publish strings here as if they came from an MCU
-  * /anchor/to_vic/relay
-    - Core, Arm, and Bio publish VicCAN messages to this topic to send to the MCU
-  * /anchor/to_vic/relay_string
-    - Publish raw strings to this topic to send directly to the MCU for debugging
-"""
-class SerialRelay(Node):
     def __init__(self):
-        # Initalize node with name
-        super().__init__("anchor_node")#previously 'serial_publisher'
+        super().__init__("anchor_node")
 
-        # Loop through all serial devices on the computer to check for the MCU
-        self.port = None
-        if port_override := os.getenv("PORT_OVERRIDE"):
-            self.port = port_override
-        ports = SerialRelay.list_serial_ports()
-        for i in range(4):
-            if self.port is not None:
-                break
-            for port in ports:
+        logger = self.get_logger()
+
+        # ROS2 Parameter Setup
+
+        self.declare_parameter(
+            "connector",
+            "auto",
+            ParameterDescriptor(
+                name="connector",
+                description="Declares which MCU connector should be used. Defaults to 'auto'.",
+                type=ParameterType.PARAMETER_STRING,
+                additional_constraints="Must be 'serial', 'can', 'mock', or 'auto'.",
+            ),
+        )
+
+        self.declare_parameter(
+            "can_override",
+            "",
+            ParameterDescriptor(
+                name="can_override",
+                description="Overrides which CAN channel will be used. Defaults to ''.",
+                type=ParameterType.PARAMETER_STRING,
+                additional_constraints="Must be a valid CAN network that shows up in `ip link show`.",
+            ),
+        )
+
+        self.declare_parameter(
+            "serial_override",
+            "",
+            ParameterDescriptor(
+                name="serial_override",
+                description="Overrides which serial port will be used. Defaults to ''.",
+                type=ParameterType.PARAMETER_STRING,
+                additional_constraints="Must be a valid path to a serial device file that shows up in `ls /dev/tty*`.",
+            ),
+        )
+
+        # Determine which connector to use. Options are Mock, Serial, and CAN
+        connector_select = (
+            self.get_parameter("connector").get_parameter_value().string_value
+        )
+        can_override = (
+            self.get_parameter("can_override").get_parameter_value().string_value
+        )
+        serial_override = (
+            self.get_parameter("serial_override").get_parameter_value().string_value
+        )
+        match connector_select:
+            case "serial":
+                logger.info("using serial connector")
+                self.connector = SerialConnector(
+                    logger, self.get_clock(), serial_override
+                )
+            case "can":
+                logger.info("using CAN connector")
+                self.connector = CANConnector(logger, self.get_clock(), can_override)
+            case "mock":
+                logger.info("using mock connector")
+                self.connector = MockConnector(logger, self.get_clock())
+            case "auto":
+                logger.info("automatically determining connector")
                 try:
-                    # connect and send a ping command
-                    ser = serial.Serial(port, 115200, timeout=1)
-                    #(f"Checking port {port}...")
-                    ser.write(b"ping\n")
-                    response = ser.read_until(bytes("\n", "utf8"))
+                    logger.info("trying CAN connector")
+                    self.connector = CANConnector(
+                        logger, self.get_clock(), can_override
+                    )
+                except (NoValidDeviceException, NoWorkingDeviceException, TypeError):
+                    logger.info("CAN connector failed, trying serial connector")
+                    self.connector = SerialConnector(
+                        logger, self.get_clock(), serial_override
+                    )
+            case _:
+                logger.fatal(
+                    f"invalid value for connector parameter: {connector_select}"
+                )
+                exit(1)
 
-                    # if pong is in response, then we are talking with the MCU
-                    if b"pong" in response:
-                        self.port = port
-                        self.get_logger().info(f"Found MCU at {self.port}!")
-                        break
-                except:
-                    pass
+        # ROS2 Topic Setup
 
-        if self.port is None:
-            self.get_logger().info("Unable to find MCU...")
-            time.sleep(1)
-            sys.exit(1)
+        # Publishers
+        self.fromvic_debug_pub_ = self.create_publisher(  # only used by serial
+            String,
+            "/anchor/from_vic/debug",
+            20,
+        )
+        self.fromvic_core_pub_ = self.create_publisher(
+            VicCAN,
+            "/anchor/from_vic/core",
+            20,
+        )
+        self.fromvic_arm_pub_ = self.create_publisher(
+            VicCAN,
+            "/anchor/from_vic/arm",
+            20,
+        )
+        self.fromvic_bio_pub_ = self.create_publisher(
+            VicCAN,
+            "/anchor/from_vic/bio",
+            20,
+        )
+        # Debug publisher
+        self.tovic_debug_pub_ = self.create_publisher(
+            VicCAN,
+            "/anchor/to_vic/debug",
+            20,
+        )
 
-        self.ser = serial.Serial(self.port, 115200)
-        self.get_logger().info(f"Enabling Relay Mode")
-        self.ser.write(b"can_relay_mode,on\n")
+        # Subscribers
+        self.tovic_sub_ = self.create_subscription(
+            VicCAN,
+            "/anchor/to_vic/relay",
+            self.write_connector,
+            20,
+        )
+        self.tovic_sub_legacy_ = self.create_subscription(
+            String,
+            "/anchor/relay",
+            self.write_connector_legacy,
+            20,
+        )
+        self.mock_mcu_sub_ = self.create_subscription(
+            String,
+            "/anchor/from_vic/mock_mcu",
+            self.on_mock_fromvic,
+            20,
+        )
+        self.tovic_string_sub_ = self.create_subscription(
+            String,
+            "/anchor/to_vic/relay_string",
+            self.connector.write_raw,
+            20,
+        )
+
+        # Close devices on exit
         atexit.register(self.cleanup)
 
-        # New pub/sub with VicCAN
-        self.fromvic_debug_pub_ = self.create_publisher(String, '/anchor/from_vic/debug', 20)
-        self.fromvic_core_pub_ = self.create_publisher(VicCAN, '/anchor/from_vic/core', 20)
-        self.fromvic_arm_pub_ = self.create_publisher(VicCAN, '/anchor/from_vic/arm', 20)
-        self.fromvic_bio_pub_ = self.create_publisher(VicCAN, '/anchor/from_vic/bio', 20)
+    def cleanup(self):
+        self.connector.cleanup()
 
-        self.mock_mcu_sub_ = self.create_subscription(String, '/anchor/from_vic/mock_mcu', self.on_mock_fromvic, 20)
-        self.tovic_sub_ = self.create_subscription(VicCAN, '/anchor/to_vic/relay', self.on_relay_tovic_viccan, 20)
-        self.tovic_debug_sub_ = self.create_subscription(String, '/anchor/to_vic/relay_string', self.on_relay_tovic_string, 20)
+    def read_connector(self):
+        """Check the connector for new data from the MCU, and publish string to appropriate topics"""
+        viccan, raw = self.connector.read()
 
+        if raw:
+            self.fromvic_debug_pub_.publish(String(data=raw))
 
-        # Create publishers 
-        self.arm_pub = self.create_publisher(String, '/anchor/arm/feedback', 10)
-        self.core_pub = self.create_publisher(String, '/anchor/core/feedback', 10)
-        self.bio_pub = self.create_publisher(String, '/anchor/bio/feedback', 10)
+        if viccan:
+            self.relay_fromvic(viccan)
 
-        self.debug_pub = self.create_publisher(String, '/anchor/debug', 10)
+    def write_connector(self, msg: VicCAN):
+        """Write to the connector and send a copy to /anchor/to_vic/debug"""
+        self.connector.write(msg)
+        self.tovic_debug_pub_.publish(msg)
 
-        # Create a subscriber 
-        self.relay_sub = self.create_subscription(String, '/anchor/relay', self.on_relay_tovic_string, 10)
-
-
-    def run(self):
-        # This thread makes all the update processes run in the background
-        global thread
-        thread = threading.Thread(target=rclpy.spin, args={self}, daemon=True)
-        thread.start()
-        
-        try:
-            while rclpy.ok():
-                self.read_MCU() # Check the MCU for updates
-        except KeyboardInterrupt:
-            sys.exit(0)
-
-    def read_MCU(self):
-        """ Check the USB serial port for new data from the MCU, and publish string to appropriate topics """
-        try:
-            output = str(self.ser.readline(), "utf8")
-            
-            if output:
-                self.relay_fromvic(output)
-                # All output over debug temporarily
-                #self.get_logger().info(f"[MCU] {output}")
-                msg = String()
-                msg.data = output
-                self.debug_pub.publish(msg)
-                if output.startswith("can_relay_fromvic,core"):
-                    self.core_pub.publish(msg)
-                elif output.startswith("can_relay_fromvic,arm") or output.startswith("can_relay_fromvic,digit"):  # digit for voltage readings
-                    self.arm_pub.publish(msg)
-                if output.startswith("can_relay_fromvic,citadel") or output.startswith("can_relay_fromvic,digit"):  # digit for SHT sensor
-                    self.bio_pub.publish(msg)
-                # msg = String()
-                # msg.data = output
-                # self.debug_pub.publish(msg)
-                return
-        except serial.SerialException as e:
-            print(f"SerialException: {e}")
-            print("Closing serial port.")
-            if self.ser.is_open:
-                self.ser.close()
-            exit(1)
-        except TypeError as e:
-            print(f"TypeError: {e}")
-            print("Closing serial port.")
-            if self.ser.is_open:
-                self.ser.close()
-            exit(1)
-        except Exception as e:
-            print(f"Exception: {e}")
-            # print("Closing serial port.")
-            # if self.ser.is_open:
-            #     self.ser.close()
-            # exit(1)
+    @deprecated("Use /anchor/to_vic/relay or /anchor/to_vic/relay_string instead of /anchor/relay")
+    def write_connector_legacy(self, msg: String):
+        """Write to the connector by first attempting to convert String to VicCAN"""
+        # please do not reference this code. ~riley
+        for cmd in msg.data.split("\n"):
+            viccan = string_to_viccan(
+                cmd,
+                "anchor",
+                self.get_logger(),
+                self.get_clock().now().to_msg(),
+            )
+            if viccan:
+                self.write_connector(viccan)
 
+    def relay_fromvic(self, msg: VicCAN):
+        """Relay a message from the MCU to the appropriate VicCAN topic"""
+        if msg.mcu_name == "core":
+            self.fromvic_core_pub_.publish(msg)
+        elif msg.mcu_name == "arm" or msg.mcu_name == "digit":
+            self.fromvic_arm_pub_.publish(msg)
+        elif msg.mcu_name == "citadel" or msg.mcu_name == "digit":
+            self.fromvic_bio_pub_.publish(msg)
 
     def on_mock_fromvic(self, msg: String):
-        """ For testing without an actual MCU, publish strings here as if they came from an MCU """
-        # self.get_logger().info(f"Got command from mock MCU: {msg}")
-        self.relay_fromvic(msg.data)
-
-
-    def on_relay_tovic_viccan(self, msg: VicCAN):
-        """ Relay a VicCAN message to the MCU """
-        output: str = f"can_relay_tovic,{msg.mcu_name},{msg.command_id}"
-        for num in msg.data:
-            output += f",{round(num, 7)}"  # limit to 7 decimal places
-        output += "\n"
-        # self.get_logger().info(f"VicCAN relay to MCU: {output}")
-        self.ser.write(bytes(output, "utf8"))
-
-    def relay_fromvic(self, msg: str):
-        """ Relay a string message from the MCU to the appropriate VicCAN topic """
-        self.fromvic_debug_pub_.publish(String(data=msg))
-        parts = msg.strip().split(",")
-        if len(parts) > 0 and parts[0] != "can_relay_fromvic":
-            self.get_logger().debug(f"Ignoring non-VicCAN message: '{msg.strip()}'")
-            return
-
-        # String validation
-        malformed: bool = False
-        malformed_reason: str = ""
-        if len(parts) < 3 or len(parts) > 7:
-            malformed = True
-            malformed_reason = f"invalid argument count (expected [3,7], got {len(parts)})"
-        elif parts[1] not in ["core", "arm", "digit", "citadel", "broadcast"]:
-            malformed = True
-            malformed_reason = f"invalid mcu_name '{parts[1]}'"
-        elif not(parts[2].isnumeric()) or int(parts[2]) < 0:
-            malformed = True
-            malformed_reason = f"command_id '{parts[2]}' is not a non-negative integer"
-        else:
-            for x in parts[3:]:
-                try:
-                    float(x)
-                except ValueError:
-                    malformed = True
-                    malformed_reason = f"data '{x}' is not a float"
-                    break
-
-        if malformed:
-            self.get_logger().warning(f"Ignoring malformed from_vic message: '{msg.strip()}'; reason: {malformed_reason}")
-            return
-
-        # Have valid VicCAN message
-
-        output = VicCAN()
-        output.mcu_name = parts[1]
-        output.command_id = int(parts[2])
-        if len(parts) > 3:
-            output.data = [float(x) for x in parts[3:]]
-        output.header = Header(stamp=self.get_clock().now().to_msg(), frame_id="from_vic")
-
-        # self.get_logger().info(f"Relaying from MCU: {output}")
-        if output.mcu_name == "core":
-            self.fromvic_core_pub_.publish(output)
-        elif output.mcu_name == "arm" or output.mcu_name == "digit":
-            self.fromvic_arm_pub_.publish(output)
-        elif output.mcu_name == "citadel" or output.mcu_name == "digit":
-            self.fromvic_bio_pub_.publish(output)
-
-
-    def on_relay_tovic_string(self, msg: String):
-        """ Relay a raw string message to the MCU for debugging """
-        message = msg.data
-        #self.get_logger().info(f"Sending command to MCU: {msg}")
-        self.ser.write(bytes(message, "utf8"))
-
-    @staticmethod
-    def list_serial_ports():
-        return glob.glob("/dev/ttyUSB*") + glob.glob("/dev/ttyACM*")
-
-    def cleanup(self):
-        print("Cleaning up before terminating...")
-        if self.ser.is_open:
-            self.ser.close()
-
-def myexcepthook(type, value, tb):
-    print("Uncaught exception:", type, value)
-    if serial_pub:
-        serial_pub.cleanup()
+        """Relay a message as if it came from the MCU"""
+        viccan = string_to_viccan(
+            msg.data,
+            "mock",
+            self.get_logger(),
+            self.get_clock().now().to_msg(),
+        )
+        if viccan:
+            self.relay_fromvic(viccan)
 
 
 def main(args=None):
-    rclpy.init(args=args)
-    sys.excepthook = myexcepthook
+    try:
+        rclpy.init(args=args)
+        anchor_node = Anchor()
 
-    global serial_pub
+        thread = threading.Thread(target=rclpy.spin, args=(anchor_node,), daemon=True)
+        thread.start()
 
-    serial_pub = SerialRelay()
-    serial_pub.run()
-
-if __name__ == '__main__':
-    #signal.signal(signal.SIGTSTP, lambda signum, frame: sys.exit(0))  # Catch Ctrl+Z and exit cleanly
-    signal.signal(signal.SIGTERM, lambda signum, frame: sys.exit(0))  # Catch termination signals and exit cleanly
-    main()
+        rate = anchor_node.create_rate(100)  # 100 Hz -- arbitrary rate
+        while rclpy.ok():
+            anchor_node.read_connector()  # Check the connector for updates
+            rate.sleep()
+    except (KeyboardInterrupt, ExternalShutdownException):
+        print("Caught shutdown signal, shutting down...")
+    finally:
+        rclpy.try_shutdown()

src/anchor_pkg/anchor_pkg/connector.py

@@ -0,0 +1,438 @@
+from abc import ABC, abstractmethod
+from astra_msgs.msg import VicCAN
+from rclpy.clock import Clock
+from rclpy.impl.rcutils_logger import RcutilsLogger
+from .convert import string_to_viccan as _string_to_viccan, viccan_to_string
+
+# CAN
+import can
+import can.interfaces.socketcan
+import struct
+
+# Serial
+import serial
+import serial.tools.list_ports
+
+KNOWN_USBS = [
+    (0x2E8A, 0x00C0),  # Raspberry Pi Pico
+    (0x1A86, 0x55D4),  # Adafruit Feather ESP32 V2
+    (0x10C4, 0xEA60),  # DOIT ESP32 Devkit V1
+    (0x1A86, 0x55D3),  # ESP32 S3 Development Board
+]
+BAUD_RATE = 115200
+
+MCU_IDS = [
+    "broadcast",
+    "core",
+    "arm",
+    "digit",
+    "faerie",
+    "citadel",
+    "libs",
+]
+
+
+class NoValidDeviceException(Exception):
+    pass
+
+
+class NoWorkingDeviceException(Exception):
+    pass
+
+
+class MultipleValidDevicesException(Exception):
+    pass
+
+
+class DeviceClosedException(Exception):
+    pass
+
+
+class Connector(ABC):
+    logger: RcutilsLogger
+    clock: Clock
+
+    def string_to_viccan(self, msg: str, mcu_name: str):
+        """function currying so that we do not need to pass logger and clock every time"""
+        return _string_to_viccan(
+            msg,
+            mcu_name,
+            self.logger,
+            self.clock.now().to_msg(),
+        )
+
+    def __init__(self, logger: RcutilsLogger, clock: Clock):
+        self.logger = logger
+        self.clock = clock
+
+    @abstractmethod
+    def read(self) -> tuple[VicCAN | None, str | None]:
+        """
+        Must return a tuple of (VicCAN, debug message or string repr of VicCAN)
+        """
+        pass
+
+    @abstractmethod
+    def write(self, msg: VicCAN):
+        pass
+
+    @abstractmethod
+    def write_raw(self, msg: str):
+        pass
+
+    def cleanup(self):
+        pass
+
+
+class SerialConnector(Connector):
+    port: str
+    mcu_name: str
+    serial_interface: serial.Serial
+
+    def __init__(self, logger: RcutilsLogger, clock: Clock, serial_override: str = ""):
+        super().__init__(logger, clock)
+
+        ports = self._find_ports()
+        mcu_name: str | None = None
+
+        if serial_override:
+            logger.warn(
+                f"using serial_override: `{serial_override}`! this will bypass several checks."
+            )
+            ports = [serial_override]
+            mcu_name = "override"
+
+        if len(ports) <= 0:
+            raise NoValidDeviceException("no valid serial device found")
+        if (l := len(ports)) > 1:
+            raise MultipleValidDevicesException(
+                f"too many ({l}) valid serial devices found"
+            )
+
+        # check each of our ports to make sure one of them is responding
+        port = ports[0]
+        # we might already have a name by now if we overrode earlier
+        mcu_name = mcu_name or self._get_name(port)
+        if not mcu_name:
+            raise NoWorkingDeviceException(
+                f"found {port}, but it did not respond with its name"
+            )
+
+        self.port = port
+        self.mcu_name = mcu_name
+
+        # if we fail at this point, it should crash because we've already tested the port
+        self.serial_interface = serial.Serial(self.port, BAUD_RATE, timeout=1)
+
+    def _find_ports(self) -> list[str]:
+        """
+        Finds all valid ports but does not test them
+
+        returns: all valid ports
+        """
+        comports = serial.tools.list_ports.comports()
+        valid_ports = list(
+            map(  # get just device strings
+                lambda p: p.device,
+                filter(  # make sure we have a known device
+                    lambda p: (p.vid, p.pid) in KNOWN_USBS and p.device is not None,
+                    comports,
+                ),
+            )
+        )
+        self.logger.info(f"found valid MCU ports: [ {', '.join(valid_ports)} ]")
+        return valid_ports
+
+    def _get_name(self, port: str) -> str | None:
+        """
+        Get the name of the MCU (if it works)
+
+        returns: str name of the MCU, None if it doesn't work
+        """
+        # attempt to open the serial port
+        serial_interface: serial.Serial
+        try:
+            self.logger.info(f"asking {port} for its name")
+            serial_interface = serial.Serial(port, BAUD_RATE, timeout=1)
+
+            serial_interface.write(b"can_relay_mode,on\n")
+
+            for i in range(4):
+                self.logger.debug(f"attempt {i + 1} of 4 asking {port} for its name")
+                response = serial_interface.read_until(bytes("\n", "utf8"))
+                try:
+                    if b"can_relay_ready" in response:
+                        args: list[str] = response.decode("utf8").strip().split(",")
+                        if len(args) == 2:
+                            self.logger.info(f"we are talking to {args[1]}")
+                            return args[1]
+                        break
+                except UnicodeDecodeError as e:
+                    self.logger.info(
+                        f"ignoring UnicodeDecodeError when asking for MCU name: {e}"
+                    )
+
+            if serial_interface.is_open:
+                # turn relay mode off if it failed to respond with its name
+                serial_interface.write(b"can_relay_mode,off\n")
+                serial_interface.close()
+        except serial.SerialException as e:
+            self.logger.error(f"SerialException when asking for MCU name: {e}")
+
+        return None
+
+    def read(self) -> tuple[VicCAN | None, str | None]:
+        try:
+            raw = str(self.serial_interface.readline(), "utf8")
+
+            if not raw:
+                return (None, None)
+
+            return (
+                self.string_to_viccan(raw, self.mcu_name),
+                raw,
+            )
+        except serial.SerialException as e:
+            self.logger.error(f"SerialException: {e}")
+            raise DeviceClosedException(f"serial port {self.port} closed unexpectedly")
+        except Exception:
+            return (None, None)  # pretty much no other error matters
+
+    def write(self, msg: VicCAN):
+        self.write_raw(viccan_to_string(msg))
+
+    def write_raw(self, msg: str):
+        self.serial_interface.write(bytes(msg, "utf8"))
+
+    def cleanup(self):
+        self.logger.info(f"closing serial port if open {self.port}")
+        try:
+            if self.serial_interface.is_open:
+                self.serial_interface.close()
+        except Exception as e:
+            self.logger.error(e)
+
+
+class CANConnector(Connector):
+    def __init__(self, logger: RcutilsLogger, clock: Clock, can_override: str):
+        super().__init__(logger, clock)
+
+        self.can_channel: str | None = None
+        self.can_bus: can.BusABC | None = None
+
+        avail = can.interfaces.socketcan.SocketcanBus._detect_available_configs()
+
+        if len(avail) == 0:
+            raise NoValidDeviceException("no CAN interfaces found")
+
+        # filter to busses whose channel matches the can_override
+        if can_override:
+            self.logger.info(f"overrode can interface with {can_override}")
+            avail = list(
+                filter(
+                    lambda b: b.get("channel") == can_override,
+                    avail,
+                )
+            )
+
+        if (l := len(avail)) > 1:
+            channels = ", ".join(str(b.get("channel")) for b in avail)
+            raise MultipleValidDevicesException(
+                f"too many ({l}) CAN interfaces found: [{channels}]"
+            )
+
+        bus = avail[0]
+        self.can_channel = str(bus.get("channel"))
+        self.logger.info(f"found CAN interface '{self.can_channel}'")
+
+        try:
+            self.can_bus = can.Bus(
+                interface="socketcan",
+                channel=self.can_channel,
+                bitrate=1_000_000,
+            )
+        except can.CanError as e:
+            raise NoWorkingDeviceException(
+                f"could not open CAN channel '{self.can_channel}': {e}"
+            )
+
+        if self.can_channel and self.can_channel.startswith("v"):
+            self.logger.warn("likely using virtual CAN interface")
+
+    def read(self) -> tuple[VicCAN | None, str | None]:
+        if not self.can_bus:
+            raise DeviceClosedException("CAN bus not initialized")
+
+        try:
+            message = self.can_bus.recv(timeout=0.0)
+        except can.CanError as e:
+            self.logger.error(f"CAN error while receiving: {e}")
+            raise DeviceClosedException("CAN bus closed unexpectedly")
+
+        if message is None:
+            return (None, None)
+
+        arbitration_id = message.arbitration_id & 0x7FF
+        data_bytes = bytes(message.data)
+
+        mcu_key = (arbitration_id >> 8) & 0b111
+        data_type_key = (arbitration_id >> 6) & 0b11
+        command = arbitration_id & 0x3F
+
+        try:
+            mcu_name = MCU_IDS[mcu_key]
+        except IndexError:
+            self.logger.warn(
+                f"received CAN frame with unknown MCU key {mcu_key}; id=0x{arbitration_id:X}"
+            )
+            return (None, None)
+
+        data: list[float] = []
+
+        try:
+            if data_type_key == 3:
+                data = []
+            elif data_type_key == 0:
+                if len(data_bytes) < 8:
+                    self.logger.warn(
+                        f"received double payload with insufficient length {len(data_bytes)}; dropping frame"
+                    )
+                    return (None, None)
+                (value,) = struct.unpack(">d", data_bytes[:8])
+                data = [float(value)]
+            elif data_type_key == 1:
+                if len(data_bytes) < 8:
+                    self.logger.warn(
+                        f"received float32x2 payload with insufficient length {len(data_bytes)}; dropping frame"
+                    )
+                    return (None, None)
+                v1, v2 = struct.unpack(">ff", data_bytes[:8])
+                data = [float(v1), float(v2)]
+            elif data_type_key == 2:
+                if len(data_bytes) < 8:
+                    self.logger.warn(
+                        f"received int16x4 payload with insufficient length {len(data_bytes)}; dropping frame"
+                    )
+                    return (None, None)
+                i1, i2, i3, i4 = struct.unpack(">hhhh", data_bytes[:8])
+                data = [float(i1), float(i2), float(i3), float(i4)]
+            else:
+                self.logger.warn(
+                    f"received CAN frame with unknown data_type_key {data_type_key}; id=0x{arbitration_id:X}"
+                )
+                return (None, None)
+        except struct.error as e:
+            self.logger.error(f"error unpacking CAN payload: {e}")
+            return (None, None)
+
+        viccan = VicCAN(
+            mcu_name=mcu_name,
+            command_id=int(command),
+            data=data,
+        )
+
+        self.logger.debug(
+            f"received CAN frame id=0x{message.arbitration_id:X}, "
+            f"decoded as VicCAN(mcu_name={viccan.mcu_name}, command_id={viccan.command_id}, data={viccan.data})"
+        )
+
+        return (
+            viccan,
+            f"{viccan.mcu_name},{viccan.command_id},"
+            + ",".join(map(str, list(viccan.data))),
+        )
+
+    def write(self, msg: VicCAN):
+        if not self.can_bus:
+            raise DeviceClosedException("CAN bus not initialized")
+
+        # build 11-bit arbitration ID according to VicCAN spec:
+        # bits 10..8: targeted MCU key
+        # bits 7..6:  data type key
+        # bits 5..0:  command
+
+        # map MCU name to 3-bit key.
+        try:
+            mcu_id = MCU_IDS.index((msg.mcu_name or "").lower())
+        except ValueError:
+            self.logger.error(
+                f"unknown VicCAN mcu_name '{msg.mcu_name}' for CAN frame; dropping message"
+            )
+            return
+
+        # determine data type from length:
+        # 0: double x1, 1: float32 x2, 2: int16 x4, 3: empty
+        match data_len := len(msg.data):
+            case 0:
+                data_type = 3
+                data = bytes()
+            case 1:
+                data_type = 0
+                data = struct.pack(">d", *msg.data)
+            case 2:
+                data_type = 1
+                data = struct.pack(">ff", *msg.data)
+            case 3 | 4: # 3 gets padded and is treated as 4
+                data_type = 2
+                # pad till we have 4 otherwise struct.pack will freak out
+                msg.data = (msg.data + [0])[:4]
+                data = struct.pack(">hhhh", *[int(x) for x in msg.data])
+            case _:
+                self.logger.error(
+                    f"unexpected VicCAN data length: {data_len}; dropping message"
+                )
+                return
+
+        # command is limited to 6 bits.
+        command = int(msg.command_id)
+        if command < 0 or command > 0x3F:
+            self.logger.error(
+                f"invalid command_id for CAN frame: {command}; dropping message"
+            )
+            return
+
+        try:
+            can_message = can.Message(
+                arbitration_id=(mcu_id << 8) | (data_type << 6) | command,
+                data=data,
+                is_extended_id=False,
+            )
+        except Exception as e:
+            self.logger.error(f"failed to construct CAN message: {e}")
+            return
+
+        try:
+            self.can_bus.send(can_message)
+            self.logger.debug(
+                f"sent CAN frame id=0x{can_message.arbitration_id:X}, "
+                f"data={list(can_message.data)}"
+            )
+        except can.CanError as e:
+            self.logger.error(f"CAN error while sending: {e}")
+            raise DeviceClosedException("CAN bus closed unexpectedly")
+
+    def write_raw(self, msg: str):
+        self.logger.warn(f"write_raw is not supported for CANConnector. msg: {msg}")
+
+    def cleanup(self):
+        try:
+            if self.can_bus is not None:
+                self.logger.info("shutting down CAN bus")
+                self.can_bus.shutdown()
+        except Exception as e:
+            self.logger.error(e)
+
+
+class MockConnector(Connector):
+    def __init__(self, logger: RcutilsLogger, clock: Clock):
+        super().__init__(logger, clock)
+        # No hardware interface for MockConnector. Publish to `/anchor/from_vic/mock_mcu` instead.
+
+    def read(self) -> tuple[VicCAN | None, str | None]:
+        return (None, None)
+
+    def write(self, msg: VicCAN):
+        pass
+
+    def write_raw(self, msg: str):
+        pass

src/anchor_pkg/anchor_pkg/convert.py

@@ -0,0 +1,64 @@
+from astra_msgs.msg import VicCAN
+from std_msgs.msg import Header
+from builtin_interfaces.msg import Time
+from rclpy.impl.rcutils_logger import RcutilsLogger
+
+
+def string_to_viccan(
+    msg: str, mcu_name: str, logger: RcutilsLogger, time: Time
+) -> VicCAN | None:
+    """
+    Converts the serial string VicCAN format to a ROS2 VicCAN message.
+    Does not fill out the Header of the message.
+    On a failure, it will log at a debug level why it failed and return None.
+    """
+
+    parts: list[str] = msg.strip().split(",")
+
+    # don't need an extra check because len of .split output is always >= 1
+    if not parts[0].startswith("can_relay_"):
+        logger.debug(f"got non-CAN data from {mcu_name}: {msg}")
+        return None
+    elif len(parts) < 3:
+        logger.debug(f"got garbage (not enough parts) CAN data from {mcu_name}: {msg}")
+        return None
+    elif len(parts) > 7:
+        logger.debug(f"got garbage (too many parts) CAN data from {mcu_name}: {msg}")
+        return None
+
+    try:
+        command_id = int(parts[2])
+    except ValueError:
+        logger.debug(
+            f"got garbage (non-integer command id) CAN data from {mcu_name}: {msg}"
+        )
+        return None
+
+    if command_id not in range(64):
+        logger.debug(
+            f"got garbage (wrong command id {command_id}) CAN data from {mcu_name}: {msg}"
+        )
+        return None
+
+    try:
+        return VicCAN(
+            header=Header(
+                stamp=time,
+                frame_id="from_vic",
+            ),
+            mcu_name=parts[1],
+            command_id=command_id,
+            data=[float(x) for x in parts[3:]],
+        )
+    except ValueError:
+        logger.debug(f"got garbage (non-numerical) CAN data from {mcu_name}: {msg}")
+        return None
+
+
+def viccan_to_string(viccan: VicCAN) -> str:
+    """Converts a ROS2 VicCAN message to the serial string VicCAN format."""
+    # make sure we accept 3 digits and treat it as 4
+    if len(viccan.data) == 3: viccan.data.append("0")
+    # go from [ w, x, y, z ] -> ",w,x,y,z" & round to 7 digits max
+    data = "".join([f",{round(val,7)}" for val in viccan.data])
+    return f"can_relay_tovic,{viccan.mcu_name},{viccan.command_id}{data}\n"

src/anchor_pkg/launch/rover.launch.py

@@ -1,132 +1,111 @@
-#!/usr/bin/env python3
-
 from launch import LaunchDescription
-from launch.actions import DeclareLaunchArgument, OpaqueFunction, Shutdown
+from launch.actions import DeclareLaunchArgument, Shutdown
+from launch.conditions import IfCondition
 from launch.substitutions import LaunchConfiguration
 from launch_ros.actions import Node
 
 
-
-#Prevent making __pycache__ directories
-from sys import dont_write_bytecode
-dont_write_bytecode = True
-
-def launch_setup(context, *args, **kwargs):
-    # Retrieve the resolved value of the launch argument 'mode'
-    mode = LaunchConfiguration('mode').perform(context)
-    nodes = []
-
-    if mode == 'anchor':
-        # Launch every node and pass "anchor" as the parameter
-        nodes.append(
-            Node(
-                package='arm_pkg',
-                executable='arm',  # change as needed
-                name='arm',
-                output='both',
-                parameters=[{'launch_mode': mode}],
-                on_exit=Shutdown()
-            )
-        )
-        nodes.append(
-            Node(
-                package='core_pkg',
-                executable='core',  # change as needed
-                name='core',
-                output='both',
-                parameters=[{'launch_mode': mode}],
-                on_exit=Shutdown()
-            )
-        )
-        nodes.append(
-            Node(
-                package='core_pkg',
-                executable='ptz',  # change as needed
-                name='ptz',
-                output='both'
-                # Currently don't shutdown all nodes if the PTZ node fails, as it is not critical
-                # on_exit=Shutdown()  # Uncomment if you want to shutdown on PTZ failure
-            )
-        )
-        nodes.append(
-            Node(
-                package='bio_pkg',
-                executable='bio',  # change as needed
-                name='bio',
-                output='both',
-                parameters=[{'launch_mode': mode}],
-                on_exit=Shutdown()
-            )
-        )
-        nodes.append(
-            Node(
-                package='anchor_pkg',
-                executable='anchor',  # change as needed
-                name='anchor',
-                output='both',
-                parameters=[{'launch_mode': mode}],
-                on_exit=Shutdown()
-            )
-        )
-    elif mode in ['arm', 'core', 'bio', 'ptz']:
-        # Only launch the node corresponding to the provided mode.
-        if mode == 'arm':
-            nodes.append(
-                Node(
-                    package='arm_pkg',
-                    executable='arm',
-                    name='arm',
-                    output='both',
-                    parameters=[{'launch_mode': mode}],
-                    on_exit=Shutdown()
-                )
-            )
-        elif mode == 'core':
-            nodes.append(
-                Node(
-                    package='core_pkg',
-                    executable='core',
-                    name='core',
-                    output='both',
-                    parameters=[{'launch_mode': mode}],
-                    on_exit=Shutdown()
-                )
-            )
-        elif mode == 'bio':
-            nodes.append(
-                Node(
-                    package='bio_pkg',
-                    executable='bio',
-                    name='bio',
-                    output='both',
-                    parameters=[{'launch_mode': mode}],
-                    on_exit=Shutdown()
-                )
-            )
-        elif mode == 'ptz':
-            nodes.append(
-                Node(
-                    package='core_pkg',
-                    executable='ptz',
-                    name='ptz',
-                    output='both',
-                    on_exit=Shutdown(), #on fail, shutdown if this was the only node to be launched
-                )
-            )
-    else:
-        # If an invalid mode is provided, print an error.
-        print("Invalid mode provided. Choose one of: arm, core, bio, anchor, ptz.")
-
-    return nodes
-
 def generate_launch_description():
-    declare_arg = DeclareLaunchArgument(
-        'mode',
-        default_value='anchor',
-        description='Launch mode: arm, core, bio, anchor, or ptz'
+    connector = LaunchConfiguration("connector")
+    serial_override = LaunchConfiguration("serial_override")
+    can_override = LaunchConfiguration("can_override")
+    use_ptz = LaunchConfiguration("use_ptz")
+
+    ld = LaunchDescription()
+
+    # arguments
+    ld.add_action(
+        DeclareLaunchArgument(
+            "connector",
+            default_value="auto",
+            description="Connector parameter for anchor node (default: 'auto')",
+        )
     )
 
-    return LaunchDescription([
-        declare_arg,
-        OpaqueFunction(function=launch_setup)
-    ])
+    ld.add_action(
+        DeclareLaunchArgument(
+            "serial_override",
+            default_value="",
+            description="Serial port override parameter for anchor node (default: '')",
+        )
+    )
+
+    ld.add_action(
+        DeclareLaunchArgument(
+            "can_override",
+            default_value="",
+            description="CAN network override parameter for anchor node (default: '')",
+        )
+    )
+
+    ld.add_action(
+        DeclareLaunchArgument(
+            "use_ptz",
+            default_value="true",  # must be string for launch system
+            description="Whether to launch PTZ node (default: true)",
+        )
+    )
+
+    # nodes
+    ld.add_action(
+        Node(
+            package="arm_pkg",
+            executable="arm",
+            name="arm",
+            output="both",
+            parameters=[{"launch_mode": "anchor"}],
+            on_exit=Shutdown(),
+        )
+    )
+
+    ld.add_action(
+        Node(
+            package="core_pkg",
+            executable="core",
+            name="core",
+            output="both",
+            parameters=[{"launch_mode": "anchor"}],
+            on_exit=Shutdown(),
+        )
+    )
+
+    ld.add_action(
+        Node(
+            package="core_pkg",
+            executable="ptz",
+            name="ptz",
+            output="both",
+            condition=IfCondition(use_ptz),
+        )
+    )
+
+    ld.add_action(
+        Node(
+            package="bio_pkg",
+            executable="bio",
+            name="bio",
+            output="both",
+            parameters=[{"launch_mode": "anchor"}],
+            on_exit=Shutdown(),
+        )
+    )
+
+    ld.add_action(
+        Node(
+            package="anchor_pkg",
+            executable="anchor",
+            name="anchor",
+            output="both",
+            parameters=[
+                {
+                    "launch_mode": "anchor",
+                    "connector": connector,
+                    "serial_override": serial_override,
+                    "can_override": can_override,
+                }
+            ],
+            on_exit=Shutdown(),
+        )
+    )
+
+    return ld

src/anchor_pkg/package.xml

@@ -3,13 +3,14 @@
 <package format="3">
   <name>anchor_pkg</name>
   <version>0.0.0</version>
-  <description>TODO: Package description</description>
-  <maintainer email="tristanmcginnis26@gmail.com">tristan</maintainer>
+  <description>Anchor -- ROS and CAN relay node</description>
+  <maintainer email="rjm0037@uah.edu">Riley</maintainer>
   <license>AGPL-3.0-only</license>
 
   <depend>rclpy</depend>
   <depend>common_interfaces</depend>
   <depend>python3-serial</depend>
+  <depend>python3-can</depend>
 
   <build_depend>black</build_depend>
 

src/anchor_pkg/setup.py

@@ -2,27 +2,24 @@ from setuptools import find_packages, setup
 from os import path
 from glob import glob
 
-package_name = 'anchor_pkg'
+package_name = "anchor_pkg"
 
 setup(
     name=package_name,
-    version='0.0.0',
-    packages=find_packages(exclude=['test']),
+    version="0.0.0",
+    packages=find_packages(exclude=["test"]),
     data_files=[
-        ('share/ament_index/resource_index/packages',
-            ['resource/' + package_name]),
-        (path.join("share", package_name), ['package.xml']),
-        (path.join("share", package_name, "launch"), glob("launch/*"))
+        ("share/ament_index/resource_index/packages", ["resource/" + package_name]),
+        (path.join("share", package_name), ["package.xml"]),
+        (path.join("share", package_name, "launch"), glob("launch/*")),
     ],
-    install_requires=['setuptools'],
+    install_requires=["setuptools"],
     zip_safe=True,
-    maintainer='tristan',
-    maintainer_email='tristanmcginnis26@gmail.com',
-    description='Anchor node used to run all modules through a single modules MCU/Computer. Commands to all modules will be relayed through CAN',
-    license='All Rights Reserved',
+    maintainer="tristan",
+    maintainer_email="tristanmcginnis26@gmail.com",
+    description="Anchor node used to run all modules through a single modules MCU/Computer. Commands to all modules will be relayed through CAN",
+    license="All Rights Reserved",
     entry_points={
-        'console_scripts': [
-            "anchor = anchor_pkg.anchor_node:main"
-        ],
+        "console_scripts": ["anchor = anchor_pkg.anchor_node:main"],
     },
 )

src/arm_pkg/arm_pkg/arm_headless.py

@@ -1,287 +0,0 @@
-import rclpy
-from rclpy.node import Node
-
-import pygame
-
-import time
-
-import serial
-import sys
-import threading
-import glob
-import os
-
-from std_msgs.msg import String
-from ros2_interfaces_pkg.msg import ControllerState
-from ros2_interfaces_pkg.msg import ArmManual
-from ros2_interfaces_pkg.msg import ArmIK
-
-
-os.environ["SDL_AUDIODRIVER"] = "dummy"  # Force pygame to use a dummy audio driver before pygame.init()
-os.environ["SDL_VIDEODRIVER"] = "dummy"  # Prevents pygame from trying to open a display
-
-class Headless(Node):
-    def __init__(self):
-        # Initalize node with name
-        super().__init__("arm_headless")
-
-        # Depricated, kept temporarily for reference
-        # self.create_timer(0.20, self.send_controls)#read and send controls
-
-        self.create_timer(0.1, self.send_manual)
-
-
-        # Create a publisher to publish any output the pico sends
-
-        # Depricated, kept temporarily for reference
-        #self.publisher = self.create_publisher(ControllerState, '/astra/arm/control', 10) 
-        self.manual_pub = self.create_publisher(ArmManual, '/arm/control/manual', 10)
-
-        # Create a subscriber to listen to any commands sent for the pico
-        
-        # Depricated, kept temporarily for reference
-        #self.subscriber = self.create_subscription(String, '/astra/arm/feedback', self.read_feedback, 10)
-
-        #self.debug_sub = self.create_subscription(String, '/arm/feedback/debug', self.read_feedback, 10)
-
-
-        self.laser_status = 0
-
-        # Initialize pygame
-        pygame.init()
-
-        # Initialize the gamepad module
-        pygame.joystick.init()
-
-        # Check if any gamepad is connected
-        if pygame.joystick.get_count() == 0:
-            print("No gamepad found.")
-            pygame.quit()
-            exit()
-        for event in pygame.event.get():
-            if event.type == pygame.QUIT:
-                pygame.quit()
-                exit()
-
-        # Initialize the first gamepad, print name to terminal
-        self.gamepad = pygame.joystick.Joystick(0)
-        self.gamepad.init()
-        print(f'Gamepad Found: {self.gamepad.get_name()}')
-        #
-        #
-
-
-    def run(self):
-        # This thread makes all the update processes run in the background
-        thread = threading.Thread(target=rclpy.spin, args={self}, daemon=True)
-        thread.start()
-        
-
-        try:
-            while rclpy.ok():
-                #Check the pico for updates
-
-                #self.read_feedback()
-                if pygame.joystick.get_count() == 0: #if controller disconnected, wait for it to be reconnected
-                    print(f"Gamepad disconnected: {self.gamepad.get_name()}")
-                    
-                    while pygame.joystick.get_count() == 0:
-                        #self.send_controls() #depricated, kept for reference temporarily
-                        self.send_manual()
-                        #self.read_feedback()
-                    self.gamepad = pygame.joystick.Joystick(0)
-                    self.gamepad.init() #re-initialized gamepad
-                    print(f"Gamepad reconnected: {self.gamepad.get_name()}")
-                    
-
-        except KeyboardInterrupt:
-            sys.exit(0)
-
-
-    def send_manual(self):
-        for event in pygame.event.get():
-            if event.type == pygame.QUIT:
-                pygame.quit()
-                exit()
-        input = ArmManual()
-
-
-        # Triggers for gripper control
-        if self.gamepad.get_axis(2) > 0:#left trigger
-            input.gripper = -1
-        elif self.gamepad.get_axis(5) > 0:#right trigger
-            input.gripper = 1
-
-        # Toggle Laser
-        if self.gamepad.get_button(7):#Start
-            self.laser_status = 1
-        elif self.gamepad.get_button(6):#Back
-            self.laser_status = 0
-        input.laser = self.laser_status
-
-        if self.gamepad.get_button(5):#right bumper, control effector
-
-            # Left stick X-axis for effector yaw
-            if self.gamepad.get_axis(0) > 0:
-                input.effector_yaw = 1
-            elif self.gamepad.get_axis(0) < 0:
-                input.effector_yaw = -1
-
-            # Right stick X-axis for effector roll
-            if self.gamepad.get_axis(3) > 0:
-                input.effector_roll = 1
-            elif self.gamepad.get_axis(3) < 0:
-                input.effector_roll = -1
-
-        else:   # Control arm axis
-            dpad_input = self.gamepad.get_hat(0)
-            input.axis0 = 0
-            if dpad_input[0] == 1:
-                input.axis0 = 1
-            elif dpad_input[0] == -1:
-                input.axis0 = -1
-
-            if self.gamepad.get_axis(0) > .15 or self.gamepad.get_axis(0) < -.15:
-                input.axis1 = round(self.gamepad.get_axis(0))
-
-            if self.gamepad.get_axis(1) > .15 or self.gamepad.get_axis(1) < -.15:
-                input.axis2 = -1 * round(self.gamepad.get_axis(1))
-
-            if self.gamepad.get_axis(4) > .15 or self.gamepad.get_axis(4) < -.15:
-                input.axis3 = -1 * round(self.gamepad.get_axis(4))
-
-            # input.axis1 = -1 * round(self.gamepad.get_axis(0))#left x-axis
-            # input.axis2 = -1 * round(self.gamepad.get_axis(1))#left y-axis
-            # input.axis3 = -1 * round(self.gamepad.get_axis(4))#right y-axis
-
-
-        #Button Mappings
-        #axis2 -> LT
-        #axis5 -> RT
-        #Buttons0 -> A
-        #Buttons1 -> B
-        #Buttons2 -> X
-        #Buttons3 -> Y
-        #Buttons4 -> LB
-        #Buttons5 -> RB
-        #Buttons6 -> Back
-        #Buttons7 -> Start
-
-        input.linear_actuator = 0
-
-
-        if pygame.joystick.get_count() != 0:
-        
-            self.get_logger().info(f"[Ctrl] {input.axis0}, {input.axis1}, {input.axis2}, {input.axis3}\n")
-            self.manual_pub.publish(input)
-        else:
-            pass
-
-        pass
-        
-    # Depricated, kept temporarily for reference
-    # def send_controls(self):
-
-    #     for event in pygame.event.get():
-    #         if event.type == pygame.QUIT:
-    #             pygame.quit()
-    #             exit()
-    #     input = ControllerState()
-
-    #     input.lt = self.gamepad.get_axis(2)#left trigger
-    #     input.rt = self.gamepad.get_axis(5)#right trigger
-        
-    #     #input.lb = self.gamepad.get_button(9)#Value must be converted to bool
-    #     if(self.gamepad.get_button(4)):#left bumper
-    #         input.lb = True
-    #     else:
-    #         input.lb = False
-
-    #     #input.rb = self.gamepad.get_button(10)#Value must be converted to bool
-    #     if(self.gamepad.get_button(5)):#right bumper
-    #         input.rb = True
-    #     else:
-    #         input.rb = False
-        
-    #     #input.plus = self.gamepad.get_button(6)#plus button
-    #     if(self.gamepad.get_button(7)):#plus button
-    #         input.plus = True
-    #     else:
-    #         input.plus = False
-
-    #     #input.minus = self.gamepad.get_button(4)#minus button
-    #     if(self.gamepad.get_button(6)):#minus button
-    #         input.minus = True
-    #     else:
-    #         input.minus = False
-
-    #     input.ls_x = round(self.gamepad.get_axis(0),2)#left x-axis
-    #     input.ls_y = round(self.gamepad.get_axis(1),2)#left y-axis
-    #     input.rs_x = round(self.gamepad.get_axis(3),2)#right x-axis
-    #     input.rs_y = round(self.gamepad.get_axis(4),2)#right y-axis  
-
-    #     #input.a = self.gamepad.get_button(1)#A button
-    #     if(self.gamepad.get_button(0)):#A button
-    #         input.a = True
-    #     else:
-    #         input.a = False
-    #     #input.b = self.gamepad.get_button(0)#B button
-    #     if(self.gamepad.get_button(1)):#B button
-    #         input.b = True
-    #     else:
-    #         input.b = False
-    #     #input.x = self.gamepad.get_button(3)#X button
-    #     if(self.gamepad.get_button(2)):#X button
-    #         input.x = True
-    #     else:
-    #         input.x = False
-    #     #input.y = self.gamepad.get_button(2)#Y button
-    #     if(self.gamepad.get_button(3)):#Y button
-    #         input.y = True
-    #     else:
-    #         input.y = False
-
-
-    #     dpad_input = self.gamepad.get_hat(0)#D-pad input
-
-    #     #not using up/down on DPad
-    #     input.d_up = False
-    #     input.d_down = False
-
-
-    #     if(dpad_input[0] == 1):#D-pad right
-    #         input.d_right = True
-    #     else:
-    #         input.d_right = False
-    #     if(dpad_input[0] == -1):#D-pad left
-    #         input.d_left = True
-    #     else:
-    #         input.d_left = False
-       
-
-    #     if pygame.joystick.get_count() != 0:
-        
-    #         self.get_logger().info(f"[Ctrl] Updated Controller State\n")
-
-    #         self.publisher.publish(input)
-    #     else:
-    #         pass
-
-
-
-        
-
-def main(args=None):
-    rclpy.init(args=args)
-
-    node = Headless()
-    
-    rclpy.spin(node)
-    rclpy.shutdown()
-
-    #tb_bs = BaseStation()
-    #node.run()
-
-
-if __name__ == '__main__':
-    main()

src/arm_pkg/arm_pkg/arm_node.py

@@ -1,273 +1,256 @@
-import rclpy
-from rclpy.node import Node
-from rclpy import qos
-import serial
 import sys
 import threading
-import glob
-import time
-import atexit
 import signal
-from std_msgs.msg import String
-from ros2_interfaces_pkg.msg import ArmManual
-from ros2_interfaces_pkg.msg import ArmIK
-from ros2_interfaces_pkg.msg import SocketFeedback
-from ros2_interfaces_pkg.msg import DigitFeedback
+import math
+from warnings import deprecated
 
+import rclpy
+from rclpy.node import Node
+from rclpy.executors import ExternalShutdownException
+from rclpy import qos
 
-# IK-Related imports
-import numpy as np
-import time, math, os
-from math import sin, cos, pi
-from ament_index_python.packages import get_package_share_directory
-# from ikpy.chain import Chain
-# from ikpy.link import OriginLink, URDFLink
-# #import pygame as pyg
-# from scipy.spatial.transform import Rotation as R
+from std_msgs.msg import String, Header
+from sensor_msgs.msg import JointState
+from control_msgs.msg import JointJog
+from astra_msgs.msg import SocketFeedback, DigitFeedback, ArmManual  # TODO: Old topics
+from astra_msgs.msg import ArmFeedback, VicCAN, RevMotorState
 
-from . import astra_arm
+control_qos = qos.QoSProfile(
+    history=qos.QoSHistoryPolicy.KEEP_LAST,
+    depth=2,
+    reliability=qos.QoSReliabilityPolicy.BEST_EFFORT,  # Best Effort subscribers are still compatible with Reliable publishers
+    durability=qos.QoSDurabilityPolicy.VOLATILE,
+    # deadline=Duration(seconds=1),
+    # lifespan=Duration(nanoseconds=500_000_000),  # 500ms
+    # liveliness=qos.QoSLivelinessPolicy.SYSTEM_DEFAULT,
+    # liveliness_lease_duration=Duration(seconds=5),
+)
 
-# control_qos = qos.QoSProfile(
-#     history=qos.QoSHistoryPolicy.KEEP_LAST,
-#     depth=1,
-#     reliability=qos.QoSReliabilityPolicy.BEST_EFFORT,
-#     durability=qos.QoSDurabilityPolicy.VOLATILE,
-#     deadline=1000,
-#     lifespan=500,
-#     liveliness=qos.QoSLivelinessPolicy.SYSTEM_DEFAULT,
-#     liveliness_lease_duration=5000
-# )
-
-serial_pub = None
 thread = None
 
 
-class SerialRelay(Node):
+class ArmNode(Node):
+    """Relay between Anchor and Basestation/Headless/Moveit2 for Arm related topics."""
+
+    # Every non-fixed joint defined in Arm's URDF
+    # Used for JointState and JointJog messsages
+    all_joint_names = [
+        "axis_0_joint",
+        "axis_1_joint",
+        "axis_2_joint",
+        "axis_3_joint",
+        "wrist_yaw_joint",
+        "wrist_roll_joint",
+        "ef_gripper_left_joint",
+    ]
+
+    # Used to verify the length of an incoming VicCAN feedback message
+    # Key is VicCAN command_id, value is expected length of data list
+    viccan_socket_msg_len_dict = {
+        53: 4,
+        54: 4,
+        55: 4,
+        58: 4,
+        59: 4,
+    }
+
+    viccan_digit_msg_len_dict = {
+        54: 4,
+        55: 2,
+        59: 2,
+    }
+
     def __init__(self):
-        # Initialize node
         super().__init__("arm_node")
 
-        # Get launch mode parameter
-        self.declare_parameter('launch_mode', 'arm')
-        self.launch_mode = self.get_parameter('launch_mode').value
-        self.get_logger().info(f"arm launch_mode is: {self.launch_mode}")
+        self.get_logger().info(f"arm launch_mode is: anchor")  # Hey I like the output
 
-        # Create publishers
-        self.debug_pub = self.create_publisher(String, '/arm/feedback/debug', 10)
-        self.socket_pub = self.create_publisher(SocketFeedback, '/arm/feedback/socket', 10)
-        self.digit_pub = self.create_publisher(DigitFeedback, '/arm/feedback/digit', 10)
-        self.feedback_timer = self.create_timer(0.25, self.publish_feedback)
+        ##################################################
+        # Parameters
 
-        # Create subscribers
-        self.ik_sub = self.create_subscription(ArmIK, '/arm/control/ik', self.send_ik, 10)
-        self.man_sub = self.create_subscription(ArmManual, '/arm/control/manual', self.send_manual, 10)
+        self.declare_parameter("use_old_topics", True)
+        self.use_old_topics = (
+            self.get_parameter("use_old_topics").get_parameter_value().bool_value
+        )
 
-        self.ik_debug = self.create_publisher(String, '/arm/debug/ik', 10)
+        ##################################################
+        # Old topics
 
-        # Topics used in anchor mode
-        if self.launch_mode == 'anchor':
-            self.anchor_sub = self.create_subscription(String, '/anchor/arm/feedback', self.anchor_feedback, 10)
-            self.anchor_pub = self.create_publisher(String, '/anchor/relay', 10)
+        if self.use_old_topics:
+            # Anchor topics
+            self.anchor_sub = self.create_subscription(
+                String, "/anchor/arm/feedback", self.anchor_feedback, 10
+            )
+            self.anchor_pub = self.create_publisher(String, "/anchor/relay", 10)
 
-        self.arm = astra_arm.Arm('arm12.urdf')
-        self.arm_feedback = SocketFeedback()
-        self.digit_feedback = DigitFeedback()
+            # Create publishers
+            self.socket_pub = self.create_publisher(
+                SocketFeedback, "/arm/feedback/socket", 10
+            )
+            self.arm_feedback = SocketFeedback()
+            self.digit_pub = self.create_publisher(
+                DigitFeedback, "/arm/feedback/digit", 10
+            )
+            self.digit_feedback = DigitFeedback()
+            self.feedback_timer = self.create_timer(0.25, self.publish_feedback)
 
-        # Search for ports IF in 'arm' (standalone) and not 'anchor' mode
-        if self.launch_mode == 'arm':
-            # Loop through all serial devices on the computer to check for the MCU
-            self.port = None
-            ports = SerialRelay.list_serial_ports()
-            for i in range(4):
-                for port in ports:
-                    try:
-                        # connect and send a ping command
-                        ser = serial.Serial(port, 115200, timeout=1)
-                        #print(f"Checking port {port}...")
-                        ser.write(b"ping\n")
-                        response = ser.read_until("\n")  # type: ignore
+            # Create subscribers
+            self.man_sub = self.create_subscription(
+                ArmManual, "/arm/control/manual", self.send_manual, 10
+            )
 
-                        # if pong is in response, then we are talking with the MCU
-                        if b"pong" in response:
-                            self.port = port
-                            self.get_logger().info(f"Found MCU at {self.port}!")
-                            break
-                    except:
-                        pass
-                if self.port is not None:
-                    break
-            
-            if self.port is None:
-                self.get_logger().info("Unable to find MCU... please make sure it is connected.")
-                time.sleep(1)
-                sys.exit(1)
-            
-            self.ser = serial.Serial(self.port, 115200)
-            atexit.register(self.cleanup)
+        ###################################################
+        # New topics
 
-    def run(self):
-        global thread
-        thread = threading.Thread(target=rclpy.spin, args=(self,), daemon=True)
-        thread.start()
-        
-        #if in arm mode, will need to read from the MCU 
+        # Anchor topics
 
-        try:
-            while rclpy.ok():
-                if self.launch_mode == 'arm':
-                    if self.ser.in_waiting:
-                        self.read_mcu()
-                    else:
-                        time.sleep(0.1)
-        except KeyboardInterrupt:
-            pass
-        finally:
-            self.cleanup()
+        # from_vic
+        self.anchor_fromvic_sub_ = self.create_subscription(
+            VicCAN, "/anchor/from_vic/arm", self.relay_fromvic, 20
+        )
+        # to_vic
+        self.anchor_tovic_pub_ = self.create_publisher(
+            VicCAN, "/anchor/to_vic/relay", 20
+        )
 
+        # Control
 
-    #Currently will just spit out all values over the /arm/feedback/debug topic as strings
-    def read_mcu(self):
-        try:
-            output = str(self.ser.readline(), "utf8")
-            if output:
-                #self.get_logger().info(f"[MCU] {output}")
-                msg = String()
-                msg.data = output
-                self.debug_pub.publish(msg)
-        except serial.SerialException:
-            self.get_logger().info("SerialException caught... closing serial port.")
-            if self.ser.is_open:
-                self.ser.close()
-            pass
-        except TypeError as e:
-            self.get_logger().info(f"TypeError: {e}")
-            print("Closing serial port.")
-            if self.ser.is_open:
-                self.ser.close()
-            pass
-        except Exception as e:
-            print(f"Exception: {e}")
-            print("Closing serial port.")
-            if self.ser.is_open:
-                self.ser.close()
-            pass
+        # Manual: /arm/manual/joint_jog is published by Basestation or Headless
+        self.man_jointjog_sub_ = self.create_subscription(
+            JointJog,
+            "/arm/manual/joint_jog",
+            self.jointjog_callback,
+            qos_profile=control_qos,
+        )
+        # IK: /joint_commands is published by JointTrajectoryController via topic_based_control
+        self.joint_command_sub_ = self.create_subscription(
+            JointState,
+            "/joint_commands",
+            self.joint_command_callback,
+            qos_profile=control_qos,
+        )
 
-    def send_ik(self, msg):
-        # Convert Vector3 to a NumPy array
-        input_raw = np.array([-msg.movement_vector.x, msg.movement_vector.y, msg.movement_vector.z])  # Convert input to a NumPy array
-        # decrease input vector by 90%
-        input_raw = input_raw * 0.2
+        # Feedback
 
-        if input_raw[0] == 0.0 and input_raw[1] == 0.0 and input_raw[2] == 0.0:
-            self.get_logger().info("No input, stopping arm.")
-            command = "can_relay_tovic,arm,39,0,0,0,0\n"
-            self.send_cmd(command)
+        # Combined Socket and Digit feedback
+        self.arm_feedback_pub_ = self.create_publisher(
+            ArmFeedback,
+            "/arm/feedback",
+            qos_profile=qos.qos_profile_sensor_data,
+        )
+        # IK arm pose: /joint_states is published from here to topic_based_control
+        self.joint_state_pub_ = self.create_publisher(
+            JointState, "/joint_states", qos_profile=qos.qos_profile_sensor_data
+        )
+
+        ###################################################
+        # Saved state
+
+        # Combined Socket and Digit feedback
+        self.arm_feedback_new = ArmFeedback()
+
+        # IK Arm pose
+        self.saved_joint_state = JointState()
+        self.saved_joint_state.name = self.all_joint_names
+        # ... initialize with zeros
+        self.saved_joint_state.position = [0.0] * len(self.saved_joint_state.name)
+        self.saved_joint_state.velocity = [0.0] * len(self.saved_joint_state.name)
+
+    def jointjog_callback(self, msg: JointJog):
+        if len(msg.joint_names) != len(msg.velocities):
+            self.get_logger().debug("Ignoring malformed /arm/manual/joint_jog message.")
             return
 
-        # Debug output
-        tempMsg = String()
-        tempMsg.data = "From IK Control Got Vector: " + str(input_raw)
-        #self.debug_pub.publish(tempMsg)
+        # Grab velocities from message
+        velocities = [
+            (
+                msg.velocities[msg.joint_names.index(joint_name)]  # type: ignore
+                if joint_name in msg.joint_names
+                else 0.0
+            )
+            for joint_name in self.all_joint_names
+        ]
+        # Deadzone
+        velocities = [vel if abs(vel) > 0.05 else 0.0 for vel in velocities]
 
-        # Target position is current position + input vector
-        current_position = self.arm.get_position_vector()
-        target_position = current_position + input_raw
+        self.send_velocities(velocities, msg.header)
 
+        # TODO: use msg.duration
 
-        #Print for IK DEBUG
-        tempMsg = String()
-        # tempMsg.data = "Current Position: " + str(current_position) + "\nInput Vector" + str(input_raw) + "\nTarget Position: " + str(target_position) + "\nAngles: " + str(self.arm.current_angles)
-        tempMsg.data = "Current Angles: " + str(math.degrees(self.arm.current_angles[2])) + ", " + str(math.degrees(self.arm.current_angles[4])) + ", " + str(math.degrees(self.arm.current_angles[6]))
-        self.ik_debug.publish(tempMsg)
-        self.get_logger().info(f"[IK] {tempMsg.data}")
+    def joint_command_callback(self, msg: JointState):
+        if len(msg.position) < 7 and len(msg.velocity) < 7:
+            self.get_logger().debug("Ignoring malformed /joint_command message.")
+            return  # command needs either position or velocity for all 7 joints
 
-        # Debug output for current position
-        #tempMsg.data = "Current Position: " + str(current_position)
-        #self.debug_pub.publish(tempMsg)
+        # Grab velocities from message
+        velocities = [
+            (
+                msg.velocity[msg.name.index(joint_name)]  # type: ignore
+                if joint_name in msg.name
+                else 0.0
+            )
+            for joint_name in self.all_joint_names
+        ]
 
-        # Debug output for target position
-        #tempMsg.data = "Target Position: " + str(target_position)
-        #self.debug_pub.publish(tempMsg)
+        self.send_velocities(velocities, msg.header)
 
-        # Perform IK with the target position
-        if self.arm.perform_ik(target_position, self.get_logger()):
-            # Send command to control
-            
-            #command = "can_relay_tovic,arm,32," + ",".join(map(str, self.arm.ik_angles[:4])) + "\n"
-            #self.send_cmd(command)
-            self.get_logger().info(f"IK Success: {target_position}")
-            self.get_logger().info(f"IK Angles: [{str(round(math.degrees(self.arm.ik_angles[2]), 2))}, {str(round(math.degrees(self.arm.ik_angles[4]), 2))}, {str(round(math.degrees(self.arm.ik_angles[6]), 2))}]")
-
-            # tempMsg = String()
-            # tempMsg.data = "IK Success: " + str(target_position)
-            # #self.debug_pub.publish(tempMsg)
-            # tempMsg.data = "Sending: " + str(command)
-            #self.debug_pub.publish(tempMsg)
-
-            # Send the IK angles to the MCU
-            command = "can_relay_tovic,arm,32," + f"{math.degrees(self.arm.ik_angles[0])*10},{math.degrees(self.arm.ik_angles[2])*10},{math.degrees(self.arm.ik_angles[4])*10},{math.degrees(self.arm.ik_angles[6])*10}" + "\n"
-            # self.send_cmd(command)
-
-            # Manual control for Wrist/Effector
-            command += "can_relay_tovic,digit,35," + str(msg.effector_roll) + "\n"
-            
-            command += "can_relay_tovic,digit,36,0," + str(msg.effector_yaw) + "\n"
-
-            command += "can_relay_tovic,digit,26," + str(msg.gripper) + "\n"
-
-            command += "can_relay_tovic,digit,28," + str(msg.laser) + "\n"
-
-            self.send_cmd(command)
-        else:
-            self.get_logger().info("IK Fail")
-            self.get_logger().info(f"IK Angles: [{str(math.degrees(self.arm.ik_angles[2]))}, {str(math.degrees(self.arm.ik_angles[4]))}, {str(math.degrees(self.arm.ik_angles[6]))}]")
-            # tempMsg = String()
-            # tempMsg.data = "IK Fail"
-            #self.debug_pub.publish(tempMsg)
+    def send_velocities(self, velocities: list[float], header: Header):
+        # ROS2's rad/s to VicCAN's deg/s*10; don't convert gripper's m/s
+        velocities = [
+            math.degrees(vel) * 10 if i < 6 else vel for i, vel in enumerate(velocities)
+        ]
 
+        # Send Axis 0-3
+        self.anchor_tovic_pub_.publish(
+            VicCAN(mcu_name="arm", command_id=43, data=velocities[0:3], header=header)
+        )
+        # Send Wrist yaw and roll
+        # TODO: Verify embedded
+        self.anchor_tovic_pub_.publish(
+            VicCAN(mcu_name="digit", command_id=43, data=velocities[4:5], header=header)
+        )
+        # Send End Effector Gripper
+        # TODO: Verify m/s received correctly by embedded
+        self.anchor_tovic_pub_.publish(
+            VicCAN(mcu_name="digit", command_id=26, data=[velocities[6]], header=header)
+        )
 
+    @deprecated("Uses an old message type. Will be removed at some point.")
     def send_manual(self, msg: ArmManual):
         axis0 = msg.axis0
         axis1 = -1 * msg.axis1
         axis2 = msg.axis2
         axis3 = msg.axis3
 
-        #Send controls for arm
-        command = "can_relay_tovic,arm,18," + str(int(msg.brake)) + "\n"
-        command += "can_relay_tovic,arm,39," + str(axis0) + "," + str(axis1) + "," + str(axis2) + "," + str(axis3) + "\n"
-        
-        #Send controls for end effector
+        # Send controls for arm
+        command = f"can_relay_tovic,arm,18,{int(msg.brake)}\n"
+        command += f"can_relay_tovic,arm,39,{axis0},{axis1},{axis2},{axis3}\n"
 
-        # command += "can_relay_tovic,digit,35," + str(msg.effector_roll) + "\n"
-        # command += "can_relay_tovic,digit,36,0," + str(msg.effector_yaw) + "\n"
-        command += "can_relay_tovic,digit,39," + str(msg.effector_yaw) + "," + str(msg.effector_roll) + "\n"
+        # Send controls for end effector
 
-        command += "can_relay_tovic,digit,26," + str(msg.gripper) + "\n"
+        command += f"can_relay_tovic,digit,39,{msg.effector_yaw},{msg.effector_roll}\n"
 
-        command += "can_relay_tovic,digit,28," + str(msg.laser) + "\n"
+        command += f"can_relay_tovic,digit,26,{msg.gripper}\n"  # no hardware rn
 
-        command += "can_relay_tovic,digit,34," + str(msg.linear_actuator) + "\n"
+        command += f"can_relay_tovic,digit,28,{msg.laser}\n"
+
+        command += f"can_relay_tovic,digit,34,{msg.linear_actuator}\n"
 
         self.send_cmd(command)
 
         return
-    
-    def send_cmd(self, msg: str):
-        if self.launch_mode == 'anchor': #if in anchor mode, send to anchor node to relay
-            output = String()
-            output.data = msg
-            self.anchor_pub.publish(output)
-        elif self.launch_mode == 'arm': #if in standalone mode, send to MCU directly
-            self.get_logger().info(f"[Arm to MCU] {msg}")
-            self.ser.write(bytes(msg, "utf8"))
 
+    @deprecated("Uses an old message type. Will be removed at some point.")
+    def send_cmd(self, msg: str):
+        output = String(data=msg)
+        self.anchor_pub.publish(output)
+
+    @deprecated("Uses an old message type. Will be removed at some point.")
     def anchor_feedback(self, msg: String):
         output = msg.data
         if output.startswith("can_relay_fromvic,arm,55"):
-            #pass
             self.updateAngleFeedback(output)
         elif output.startswith("can_relay_fromvic,arm,54"):
-            #pass
             self.updateBusVoltage(output)
         elif output.startswith("can_relay_fromvic,arm,53"):
             self.updateMotorFeedback(output)
@@ -288,45 +271,149 @@ class SerialRelay(Node):
         else:
             return
 
+    def relay_fromvic(self, msg: VicCAN):
+        # Code for socket and digit are broken out for cleaner code
+        if msg.mcu_name == "arm":
+            self.process_fromvic_arm(msg)
+        elif msg.mcu_name == "digit":
+            self.process_fromvic_digit(msg)
+
+    def process_fromvic_arm(self, msg: VicCAN):
+        assert msg.mcu_name == "arm"
+
+        # Check message len to prevent crashing on bad data
+        if msg.command_id in self.viccan_socket_msg_len_dict:
+            expected_len = self.viccan_socket_msg_len_dict[msg.command_id]
+            if len(msg.data) != expected_len:
+                self.get_logger().warning(
+                    f"Ignoring VicCAN message with id {msg.command_id} due to unexpected data length (expected {expected_len}, got {len(msg.data)})"
+                )
+                return
+
+        match msg.command_id:
+            case 53:  # REV SPARK MAX feedback
+                motorId = round(msg.data[0])
+                motor: RevMotorState | None = None
+                match motorId:
+                    case 1:
+                        motor = self.arm_feedback_new.axis1_motor
+                    case 2:
+                        motor = self.arm_feedback_new.axis2_motor
+                    case 3:
+                        motor = self.arm_feedback_new.axis3_motor
+                    case 4:
+                        motor = self.arm_feedback_new.axis0_motor
+
+                if motor:
+                    motor.temperature = float(msg.data[1]) / 10.0
+                    motor.voltage = float(msg.data[2]) / 10.0
+                    motor.current = float(msg.data[3]) / 10.0
+                    motor.header.stamp = msg.header.stamp
+
+                self.arm_feedback_pub_.publish(self.arm_feedback_new)
+            case 54:  # Board voltages
+                self.arm_feedback_new.socket_voltage.vbatt = float(msg.data[0]) / 100.0
+                self.arm_feedback_new.socket_voltage.v12 = float(msg.data[1]) / 100.0
+                self.arm_feedback_new.socket_voltage.v5 = float(msg.data[2]) / 100.0
+                self.arm_feedback_new.socket_voltage.v3 = float(msg.data[3]) / 100.0
+                self.arm_feedback_new.socket_voltage.header.stamp = msg.header.stamp
+            case 55:  # Arm joint positions
+                angles = [angle / 10.0 for angle in msg.data]  # VicCAN sends deg*10
+                # Joint state publisher for URDF visualization
+                self.saved_joint_state.position[0] = math.radians(angles[0])  # Axis 0
+                self.saved_joint_state.position[1] = math.radians(angles[1])  # Axis 1
+                self.saved_joint_state.position[2] = math.radians(angles[2])  # Axis 2
+                self.saved_joint_state.position[3] = math.radians(angles[3])  # Axis 3
+                # Wrist is handled by digit feedback
+                self.saved_joint_state.header.stamp = msg.header.stamp
+                self.joint_state_pub_.publish(self.saved_joint_state)
+            case 58:  # REV SPARK MAX position and velocity feedback
+                motorId = round(msg.data[0])
+                motor: RevMotorState | None = None
+                match motorId:
+                    case 1:
+                        motor = self.arm_feedback_new.axis1_motor
+                    case 2:
+                        motor = self.arm_feedback_new.axis2_motor
+                    case 3:
+                        motor = self.arm_feedback_new.axis3_motor
+                    case 4:
+                        motor = self.arm_feedback_new.axis0_motor
+
+                if motor:
+                    motor.position = float(msg.data[1])
+                    motor.velocity = float(msg.data[2])
+                    motor.header.stamp = msg.header.stamp
+
+                self.arm_feedback_pub_.publish(self.arm_feedback_new)
+            case 59:  # Arm joint velocities
+                velocities = [vel / 100.0 for vel in msg.data]  # VicCAN sends deg/s*100
+                self.saved_joint_state.velocity[0] = math.radians(
+                    velocities[0]
+                )  # Axis 0
+                self.saved_joint_state.velocity[1] = math.radians(
+                    velocities[1]
+                )  # Axis 1
+                self.saved_joint_state.velocity[2] = math.radians(
+                    velocities[2]
+                )  # Axis 2
+                self.saved_joint_state.velocity[3] = math.radians(
+                    velocities[3]
+                )  # Axis 3
+                # Wrist is handled by digit feedback
+                self.saved_joint_state.header.stamp = msg.header.stamp
+                self.joint_state_pub_.publish(self.saved_joint_state)
+
+    def process_fromvic_digit(self, msg: VicCAN):
+        assert msg.mcu_name == "digit"
+
+        # Check message len to prevent crashing on bad data
+        if msg.command_id in self.viccan_digit_msg_len_dict:
+            expected_len = self.viccan_digit_msg_len_dict[msg.command_id]
+            if len(msg.data) != expected_len:
+                self.get_logger().warning(
+                    f"Ignoring VicCAN message with id {msg.command_id} due to unexpected data length (expected {expected_len}, got {len(msg.data)})"
+                )
+                return
+
+        match msg.command_id:
+            case 54:  # Board voltages
+                self.arm_feedback_new.digit_voltage.vbatt = float(msg.data[0]) / 100.0
+                self.arm_feedback_new.digit_voltage.v12 = float(msg.data[1]) / 100.0
+                self.arm_feedback_new.digit_voltage.v5 = float(msg.data[2]) / 100.0
+            case 55:  # Arm joint positions
+                self.saved_joint_state.position[4] = math.radians(
+                    msg.data[0]
+                )  # Wrist roll
+                self.saved_joint_state.position[5] = math.radians(
+                    msg.data[1]
+                )  # Wrist yaw
+
+    @deprecated("Uses an old message type. Will be removed at some point.")
     def publish_feedback(self):
         self.socket_pub.publish(self.arm_feedback)
         self.digit_pub.publish(self.digit_feedback)
 
+    @deprecated("Uses an old message type. Will be removed at some point.")
     def updateAngleFeedback(self, msg: str):
         # Angle feedbacks,
         # split the msg.data by commas
         parts = msg.split(",")
-        
+
         if len(parts) >= 7:
             # Extract the angles from the string
             angles_in = parts[3:7]
             # Convert the angles to floats divide by 10.0
             angles = [float(angle) / 10.0 for angle in angles_in]
-            # angles[0] = 0.0 #override axis0 to zero
-            #
-            #
-            #THIS NEEDS TO BE REMOVED LATER
-            #PLACEHOLDER FOR WRIST VALUE 
-            #
-            #
-            angles.append(0.0)#placeholder for wrist_continuous
-            angles.append(0.0)#placeholder for wrist
-            #
-            #
-            # # Update the arm's current angles
-            self.arm.update_angles(angles)
+
             self.arm_feedback.axis0_angle = angles[0]
             self.arm_feedback.axis1_angle = angles[1]
             self.arm_feedback.axis2_angle = angles[2]
             self.arm_feedback.axis3_angle = angles[3]
-            # self.get_logger().info(f"Angles: {angles}")
-            # #debug publish angles
-            # tempMsg = String()
-            # tempMsg.data = "Angles: " + str(angles)
-            # #self.debug_pub.publish(tempMsg)
         else:
             self.get_logger().info("Invalid angle feedback input format")
 
+    @deprecated("Uses an old message type. Will be removed at some point.")
     def updateBusVoltage(self, msg: str):
         # Bus Voltage feedbacks
         parts = msg.split(",")
@@ -340,7 +427,8 @@ class SerialRelay(Node):
             self.arm_feedback.voltage_3 = float(voltages_in[3]) / 100.0
         else:
             self.get_logger().info("Invalid voltage feedback input format")
-    
+
+    @deprecated("Uses an old message type. Will be removed at some point.")
     def updateMotorFeedback(self, msg: str):
         parts = str(msg.strip()).split(",")
         motorId = round(float(parts[3]))
@@ -365,33 +453,27 @@ class SerialRelay(Node):
             self.arm_feedback.axis0_current = current
 
 
-    @staticmethod
-    def list_serial_ports():
-        return glob.glob("/dev/ttyUSB*") + glob.glob("/dev/ttyACM*")
-        #return glob.glob("/dev/tty[A-Za-z]*")
+def exit_handler(signum, frame):
+    print("Caught SIGTERM. Exiting...")
+    rclpy.try_shutdown()
+    sys.exit(0)
 
-    def cleanup(self):
-        print("Cleaning up...")
-        try:
-            if self.ser.is_open:
-                self.ser.close()
-        except Exception as e:
-            exit(0)
-
-def myexcepthook(type, value, tb):
-    print("Uncaught exception:", type, value)
-    if serial_pub:
-        serial_pub.cleanup()
 
 def main(args=None):
     rclpy.init(args=args)
-    sys.excepthook = myexcepthook
 
-    global serial_pub
-    serial_pub = SerialRelay()
-    serial_pub.run()
+    # Catch termination signals and exit cleanly
+    signal.signal(signal.SIGTERM, exit_handler)
 
-if __name__ == '__main__':
-    #signal.signal(signal.SIGTSTP, lambda signum, frame: sys.exit(0))  # Catch Ctrl+Z and exit cleanly
-    signal.signal(signal.SIGTERM, lambda signum, frame: sys.exit(0))  # Catch termination signals and exit cleanly
+    arm_node = ArmNode()
+
+    try:
+        rclpy.spin(arm_node)
+    except (KeyboardInterrupt, ExternalShutdownException):
+        pass
+    finally:
+        rclpy.try_shutdown()
+
+
+if __name__ == "__main__":
     main()

src/arm_pkg/arm_pkg/astra_arm.py

@@ -1,145 +0,0 @@
-import rclpy
-from rclpy.node import Node
-import numpy as np
-import time, math, os
-from math import sin, cos, pi
-from ament_index_python.packages import get_package_share_directory
-from ikpy.chain import Chain
-from ikpy.link import OriginLink, URDFLink
-#import pygame as pyg
-from scipy.spatial.transform import Rotation as R
-from geometry_msgs.msg import Vector3  
-
-
-# Misc
-degree = pi / 180.0
-
-
-def convert_angles(angles):
-    # Converts angles to the format used for the urdf (contains some dummy joints)
-    return [0.0, math.radians(angles[0]), math.radians(angles[1]), 0.0, math.radians(angles[2]), 0.0, math.radians(angles[3]), 0.0, math.radians(angles[4]), math.radians(angles[5]), 0.0]
-
-
-class Arm:
-    def __init__(self, urdf_name):
-        self.ik_tolerance = 1e-1 #Tolerance (in meters) to determine if solution is valid
-        # URDF file path
-        self.urdf = os.path.join(get_package_share_directory('arm_pkg'), 'urdf', urdf_name)
-        # IKpy Chain        
-        self.chain = Chain.from_urdf_file(self.urdf)
-
-
-        # Arrays for joint states
-        # Some links in the URDF are static (non-joints), these will remain zero for IK
-        # Indexes: Fixed_base, Ax_0, Ax_1, seg1, Ax_2, seg2, ax_3, seg3, continuous, wrist, Effector
-        self.zero_angles = [0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
-        self.current_angles = self.zero_angles
-        self.last_angles = self.zero_angles
-        self.ik_angles = self.zero_angles
-
-        self.current_position: list[float] = []
-        self.target_position = [0.0, 0.0, 0.0] 
-        self.target_orientation: list = [] # Effector orientation desired at target position. 
-                                # Generally orientation for the effector is modified manually by the operator. 
-        
-        # Might not need, copied over from state_publisher.py in ik_test
-        #self.step = 0.03 # Max movement increment
-
-
-    def perform_ik(self, target_position, logger):
-        self.target_position = target_position
-        # Update the target orientation to the current orientation
-        self.update_orientation()
-        # print(f"[IK FOR] Target Position: {self.target_position}")
-        try:
-            # print(f"[TRY] Current Angles: {self.current_angles}")
-            # print(f"[TRY] Target Position: {self.target_position}")
-            # print(f"[TRY] Target Orientation: {self.target_orientation}")
-            self.ik_angles = self.chain.inverse_kinematics(
-                target_position=self.target_position,
-                target_orientation=self.target_orientation,
-                initial_position=self.current_angles,
-                orientation_mode="all"
-            )
-            # Check if the solution is within the tolerance
-            fk_matrix = self.chain.forward_kinematics(self.ik_angles)
-
-            fk_position = fk_matrix[:3, 3]  # type: ignore
-            
-            # print(f"[TRY] FK Position for Solution: {fk_position}")
-
-            error = np.linalg.norm(target_position - fk_position)
-            if error > self.ik_tolerance:
-                logger.info(f"No VALID IK Solution within tolerance. Error: {error}")
-                return False
-            else:
-                logger.info(f"IK Solution Found. Error: {error}")
-                return True
-        except Exception as e:
-            logger.info(f"IK failed for exception: {e}")
-            return False
-    
-    # # Given the FK_Matix for the arm's current pose, update the orientation array
-    # def update_orientation(self, fk_matrix):
-    #     self.target_orientation = fk_matrix[:3, :3]
-    #     return
-    
-    # def update_joints(self, ax_0, ax_1, ax_2, ax_3, wrist):
-    #     self.current_angles = [0.0, 0.0, ax_0, ax_1, ax_2, ax_3, wrist, 0.0]
-    #     return
-
-    # Get current orientation of the end effector and update target_orientation
-    def update_orientation(self):
-
-        # FK matrix for arm's current pose
-        fk_matrix = self.chain.forward_kinematics(self.current_angles)
-        
-        # Update target_orientation to the effector's current orientation
-        self.target_orientation = fk_matrix[:3, :3]  # type: ignore
-
-    # Update current angles to those provided
-    # Resetting last_angles to the new angles
-    #
-    # Use: First call, or when angles are changed manually.
-    def reset_angles(self, angles):
-        # Update angles to the new angles
-        self.current_angles = convert_angles(angles)
-        self.last_angles = self.current_angles
-
-    # Update current angles to those provided
-    # Maintain previous angles in last_angles
-    #
-    # Use: Repeated calls during IK operation
-    def update_angles(self, angles):
-        # Update angles to the new angles
-        self.last_angles = self.current_angles
-        self.current_angles = convert_angles(angles)
-    
-    # Get current X,Y,Z position of end effector
-    def get_position(self):
-        # FK matrix for arm's current pose
-        fk_matrix = self.chain.forward_kinematics(self.current_angles)
-        
-        # Get the position of the end effector from the FK matrix
-        position = fk_matrix[:3, 3]  # type: ignore
-        
-        return position
-
-    # Get current X,Y,Z position of end effector
-    def get_position_vector(self):
-        # FK matrix for arm's current pose
-        fk_matrix = self.chain.forward_kinematics(self.current_angles)
-        
-        # Get the position of the end effector from the FK matrix
-        position = fk_matrix[:3, 3]  # type: ignore
-
-        # Return position as a NumPy array
-        return np.array(position)
-
-    
-    def update_position(self):
-        # FK matrix for arm's current pose
-        fk_matrix = self.chain.forward_kinematics(self.current_angles)
-        
-        # Get the position of the end effector from the FK matrix and update current pos
-        self.current_position = fk_matrix[:3, 3]  # type: ignore

src/arm_pkg/package.xml

@@ -10,9 +10,7 @@
   <depend>rclpy</depend>
   <depend>common_interfaces</depend>
   <depend>python3-numpy</depend>
-  <depend>ros2_interfaces_pkg</depend>
-  <!-- TODO: remove after refactored out -->
-  <exec_depend>python3-ikpy-pip</exec_depend>
+  <depend>astra_msgs</depend>
 
   <test_depend>ament_copyright</test_depend>
   <test_depend>ament_flake8</test_depend>

src/arm_pkg/setup.cfg

@@ -2,3 +2,5 @@
 script_dir=$base/lib/arm_pkg
 [install]
 install_scripts=$base/lib/arm_pkg
+[build_scripts]
+executable= /usr/bin/env python3

src/arm_pkg/setup.py

@@ -1,30 +1,22 @@
-from setuptools import find_packages, setup
-import os
-from glob import glob
+from setuptools import setup
 
-package_name = 'arm_pkg'
+package_name = "arm_pkg"
 
 setup(
     name=package_name,
-    version='0.0.0',
-    packages=find_packages(exclude=['test']),
+    version="1.0.0",
+    packages=[package_name],
     data_files=[
-        ('share/ament_index/resource_index/packages',
-            ['resource/' + package_name]),
-        ('share/' + package_name, ['package.xml']),
-        (os.path.join('share', package_name, 'launch'), glob('launch/*')),
-  	    (os.path.join('share', package_name, 'urdf'), glob('urdf/*')),
+        ("share/ament_index/resource_index/packages", ["resource/" + package_name]),
+        ("share/" + package_name, ["package.xml"]),
     ],
-    install_requires=['setuptools'],
+    install_requires=["setuptools"],
     zip_safe=True,
-    maintainer='tristan',
-    maintainer_email='tristanmcginnis26@gmail.com',
-    description='TODO: Package description',
-    license='All Rights Reserved',
+    maintainer="David",
+    maintainer_email="ds0196@uah.edu",
+    description="Relays topics related to the arm between VicCAN (through Anchor) and basestation.",
+    license="AGPL-3.0-only",
     entry_points={
-        'console_scripts': [
-            'arm = arm_pkg.arm_node:main',
-            'headless = arm_pkg.arm_headless:main'
-        ],
+        "console_scripts": ["arm = arm_pkg.arm_node:main"],
     },
 )

src/arm_pkg/urdf/arm11.urdf

@@ -1,239 +0,0 @@
-<?xml version="1.0" ?>
-<!-- =================================================================================== -->
-<!-- |    This document was autogenerated by xacro from omni_description/robots/omnipointer_arm_only.urdf.xacro | -->
-<!-- |    EDITING THIS FILE BY HAND IS NOT RECOMMENDED                                 | -->
-<!-- =================================================================================== -->
-<robot name="omnipointer" xmlns:xacro="http://ros.org/wiki/xacro">
-  <!--MX64trntbl + MX106:  ? + 0.153 -->
-  <!-- singleaxismount + 2.5girder + singleaxismount + base + MX106: 0.007370876 + 0.0226796 + 0.007370876 + ? + 0.153 -->
-  <!-- frame106 + singleaxismount + adjustgirder + singleaxismount + base + MX28: 0.0907185 + 0.00737088 + 0.110563 + 0.00737088 + ? + 0.077 -->
-  <!-- frame28 + singleaxismount + 5girder + singleaxismount + base + MX28: 0.0907185 + 0.00737088 + 0.0368544 + 0.00737088 + ? + 0.077 -->
-  <!-- frame28 + singleaxismount + 2.5girder + singleaxismount + tip: 0.0907185 + 0.00737088 + 0.0226796 + 0.00737088 + ? -->
-  <material name="omni/Blue">
-    <color rgba="0 0 0.8 1"/>
-  </material>
-  <material name="omni/Red">
-    <color rgba="1 0 0 1"/>
-  </material>
-  <material name="omni/Green">
-    <color rgba="0 1 0 1"/>
-  </material>
-  <material name="omni/Yellow">
-    <color rgba="1 1 0 1"/>
-  </material>
-  <material name="omni/LightGrey">
-    <color rgba="0.6 0.6 0.6 1"/>
-  </material>
-  <material name="omni/DarkGrey">
-    <color rgba="0.4 0.4 0.4 1"/>
-  </material>
-  <!-- Now we can start using the macros xacro:included above to define the actual omnipointer -->
-  <!-- The first use of a macro.  This one was defined in youbot_base/base.urdf.xacro above.
-       A macro like this will expand to a set of link and joint definitions, and to additional
-       Gazebo-related extensions (sensor plugins, etc).  The macro takes an argument, name,
-       that equals "base", and uses it to generate names for its component links and joints
-       (e.g., base_link).  The xacro:included origin block is also an argument to the macro.  By convention,
-       the origin block defines where the component is w.r.t its parent (in this case the parent
-       is the world frame). For more, see http://www.ros.org/wiki/xacro -->
-  <!-- foot for arm-->
-  <link name="base_link">
-    <inertial>
-      <origin rpy="0 0 0" xyz="0 0 0"/>
-      <mass value="10.0"/>
-      <inertia ixx="0.1" ixy="0" ixz="0" iyy="0.1" iyz="0" izz="0.1"/>
-    </inertial>
-  </link>
-  <!-- joint between base_link and arm_0_link -->
-  <joint name="arm_joint_0" type="fixed">
-    <origin rpy="0 0 0" xyz="0 0 0"/>
-    <parent link="base_link"/>
-    <child link="arm_link_0"/>
-  </joint>
-  <link name="arm_link_0">
-    <visual>
-      <origin rpy="0 0 0" xyz="0 0 0.02725"/>
-      <geometry>
-        <box size="0.1143 0.1143 0.0545"/>
-      </geometry>
-      <material name="omni/LightGrey"/>
-    </visual>
-    <collision>
-      <origin rpy="0 0 0" xyz="0 0 0.02725"/>
-      <geometry>
-        <box size="0.1143 0.1143 0.0545"/>
-      </geometry>
-    </collision>
-    <inertial>
-      <!-- CENTER OF MASS -->
-      <origin rpy="0 0 0" xyz="0 0 0.02725"/>
-      <mass value="0.2"/>
-      <!-- box inertia: 1/12*m(y^2+z^2), ... -->
-      <inertia ixx="0.000267245666667" ixy="0" ixz="0" iyy="0.000267245666667" iyz="0" izz="0.000435483"/>
-    </inertial>
-  </link>
-  <joint name="arm_joint_1" type="revolute">
-    <parent link="arm_link_0"/>
-    <child link="arm_link_1"/>
-    <dynamics damping="3.0" friction="0.3"/>
-    <limit effort="30.0" lower="-3.1415926535" upper="3.1415926535" velocity="5.0"/>
-    <origin rpy="0 0 0" xyz="0 0 0.0545"/>
-    <axis xyz="0 0 1"/>
-  </joint>
-  <link name="arm_link_1">
-    <visual>
-      <origin rpy="0 0 0" xyz="0 0 0.075"/>
-      <geometry>
-        <box size="0.0402 0.05 0.15"/>
-      </geometry>
-      <material name="omni/Blue"/>
-    </visual>
-    <collision>
-      <origin rpy="0 0 0" xyz="0 0 0.075"/>
-      <geometry>
-        <box size="0.0402 0.05 0.15"/>
-      </geometry>
-    </collision>
-    <inertial>
-      <!-- CENTER OF MASS -->
-      <origin rpy="0 0 0" xyz="0 0 0.075"/>
-      <mass value="0.190421352"/>
-      <!-- box inertia: 1/12*m(y^2+z^2), ... -->
-      <inertia ixx="0.000279744834534" ixy="0" ixz="0" iyy="0.000265717763008" iyz="0" izz="6.53151584738e-05"/>
-    </inertial>
-  </link>
-  <joint name="arm_joint_2" type="revolute">
-    <parent link="arm_link_1"/>
-    <child link="arm_link_2"/>
-    <dynamics damping="3.0" friction="0.3"/>
-    <limit effort="30.0" lower="-1.75079632679" upper="1.75079632679" velocity="5.0"/>
-    <origin rpy="0 0 0" xyz="0 0 0.15"/>
-    <axis xyz="0 1 0"/>
-  </joint>
-  <link name="arm_link_2">
-    <visual>
-      <origin rpy="0 0 0" xyz="0 0 0.2355"/>
-      <geometry>
-        <box size="0.0356 0.05 0.471"/>
-      </geometry>
-      <material name="omni/Red"/>
-    </visual>
-    <collision>
-      <origin rpy="0 0 0" xyz="0 0 0.2355"/>
-      <geometry>
-        <box size="0.0356 0.05 0.471"/>
-      </geometry>
-    </collision>
-    <inertial>
-      <!-- CENTER OF MASS -->
-      <origin rpy="0 0 0" xyz="0 0 0.2355"/>
-      <mass value="0.29302326"/>
-      <!-- box inertia: 1/12*m(y^2+z^2), ... -->
-      <inertia ixx="0.00251484771035" ixy="0" ixz="0" iyy="0.00248474836108" iyz="0" izz="9.19936757328e-05"/>
-    </inertial>
-  </link>
-  <joint name="arm_joint_3" type="revolute">
-    <parent link="arm_link_2"/>
-    <child link="arm_link_3"/>
-    <dynamics damping="3.0" friction="0.3"/>
-    <limit effort="30.0" lower="-1.75079632679" upper="1.75079632679" velocity="5.0"/>
-    <origin rpy="0 0 0" xyz="0 0 0.471"/>
-    <axis xyz="0 1 0"/>
-  </joint>
-  <link name="arm_link_3">
-    <visual>
-      <origin rpy="0 0 0" xyz="0 0 0.1885"/>
-      <geometry>
-        <box size="0.0356 0.05 0.377"/>
-      </geometry>
-      <material name="omni/Yellow"/>
-    </visual>
-    <collision>
-      <origin rpy="0 0 0" xyz="0 0 0.1885"/>
-      <geometry>
-        <box size="0.0356 0.05 0.377"/>
-      </geometry>
-    </collision>
-    <inertial>
-      <!-- CENTER OF MASS -->
-      <origin rpy="0 0 0" xyz="0 0 0.1885"/>
-      <mass value="0.21931466"/>
-      <!-- box inertia: 1/12*m(y^2+z^2), ... -->
-      <inertia ixx="0.000791433503053" ixy="0" ixz="0" iyy="0.000768905501178" iyz="0" izz="6.88531064581e-05"/>
-    </inertial>
-  </link>
-  <joint name="arm_joint_4" type="revolute">
-    <parent link="arm_link_3"/>
-    <child link="arm_link_4"/>
-    <dynamics damping="3.0" friction="0.3"/>
-    <limit effort="30.0" lower="-1.75079632679" upper="1.75079632679" velocity="5.0"/>
-    <origin rpy="0 0 0" xyz="0 0 0.377"/>
-    <axis xyz="0 1 0"/>
-  </joint>
-  <link name="arm_link_4">
-    <visual>
-      <origin rpy="0 0 0" xyz="0 0 0.066"/>
-      <geometry>
-        <box size="0.0356 0.05 0.132"/>
-      </geometry>
-      <material name="omni/Green"/>
-    </visual>
-    <collision>
-      <origin rpy="0 0 0" xyz="0 0 0.066"/>
-      <geometry>
-        <box size="0.0356 0.05 0.132"/>
-      </geometry>
-    </collision>
-    <inertial>
-      <!-- CENTER OF MASS -->
-      <origin rpy="0 0 0" xyz="0 0 0.066"/>
-      <mass value="0.15813986"/>
-      <!-- box inertia: 1/12*m(y^2+z^2), ... -->
-      <inertia ixx="0.00037242266488" ixy="0" ixz="0" iyy="0.000356178538461" iyz="0" izz="4.96474819141e-05"/>
-    </inertial>
-  </link>
-  <joint name="arm_joint_5" type="revolute">
-    <parent link="arm_link_4"/>
-    <child link="arm_link_5"/>
-    <dynamics damping="3.0" friction="0.3"/>
-    <limit effort="30.0" lower="-1.75079632679" upper="1.75079632679" velocity="5.0"/>
-    <origin rpy="0 0 0" xyz="0 0 0.132"/>
-    <axis xyz="1 0 0"/>
-  </joint>
-  <link name="arm_link_5">
-    <visual>
-      <origin rpy="0 0 0" xyz="0 0 0.124"/>
-      <geometry>
-        <box size="0.0356 0.05 0.248"/>
-      </geometry>
-      <material name="omni/Blue"/>
-    </visual>
-    <collision>
-      <origin rpy="0 0 0" xyz="0 0 0.124"/>
-      <geometry>
-        <box size="0.0356 0.05 0.248"/>
-      </geometry>
-    </collision>
-    <inertial>
-      <!-- CENTER OF MASS -->
-      <origin rpy="0 0 0" xyz="0 0 0.124"/>
-      <mass value="0.15813986"/>
-      <!-- box inertia: 1/12*m(y^2+z^2), ... -->
-      <inertia ixx="0.00037242266488" ixy="0" ixz="0" iyy="0.000356178538461" iyz="0" izz="4.96474819141e-05"/>
-    </inertial>
-  </link>
-  <joint name="arm_joint_6" type="fixed">
-    <parent link="arm_link_5"/>
-    <child link="arm_link_6"/>
-    <origin rpy="0 0 0" xyz="0 0 0.248"/>
-  </joint>
-  <link name="arm_link_6">
-    <inertial>
-      <!-- CENTER OF MASS -->
-      <origin rpy="0 0 0" xyz="0 0 0"/>
-      <mass value="1e-12"/>
-      <!-- box inertia: 1/12*m(y^2+z^2), ... -->
-      <inertia ixx="1e-12" ixy="0" ixz="0" iyy="1e-12" iyz="0" izz="1e-12"/>
-    </inertial>
-  </link>
-  <!-- END OF ARM LINKS/JOINTS -->
-</robot>

src/arm_pkg/urdf/arm12.urdf

@@ -1,307 +0,0 @@
-<robot name="robot">
-  <link name="base_footprint"></link>
-  <joint name="base_joint" type="fixed">
-    <parent link="base_footprint" />
-    <child link="base_link" />
-    <origin xyz="0 0 0.0004048057655643422" rpy="0 0 0" />
-  </joint>
-  <link name="base_link">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <box size="0.5 0.5 0.01" />
-      </geometry>
-      <material name="base_link-material">
-        <color rgba="0 0.6038273388475408 1 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <box size="0.5 0.5 0.01" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.17" ixy="0" ixz="0" iyy="0.17" iyz="0" izz="0.05" />
-    </inertial>
-  </link>
-  <joint name="Axis_0_Joint" type="revolute">
-    <parent link="base_link" />
-    <child link="Axis_0" />
-    <origin xyz="0 0 0.035" rpy="0 0 0" />
-    <axis xyz="0 0 1"/>
-    <limit effort="1000.0" lower="-2.5" upper="2.5" velocity="0.5"/>  </joint>
-  <link name="Axis_0">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.15" length="0.059" />
-      </geometry>
-      <material name="Axis_0-material">
-        <color rgba="0.3515325994898463 0.4735314961384573 0.9301108583738498 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.15" length="0.059" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Axis_1_Joint" type="revolute">
-    <parent link="Axis_0" />
-    <child link="Axis_1" />
-    <origin xyz="0 0 0.11189588647115647" rpy="1.5707963267948963 0 0" />
-    <axis xyz="0 0 1"/>
-    <limit effort="1000.0" lower="-1.7" upper="1.7" velocity="0.5"/>  </joint>
-  <link name="Axis_1">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.082" length="0.1" />
-      </geometry>
-      <material name="Axis_1-material">
-        <color rgba="0.14702726648767014 0.14126329113044458 0.7304607400847158 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.082" length="0.1" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Axis_1_to_Segment_1" type="fixed">
-    <parent link="Axis_1" />
-    <child link="Segment_1" />
-    <origin xyz="0 0.2350831500270899 0" rpy="-1.5707963267948963 0 0" />
-  </joint>
-  <link name="Segment_1">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.025" length="0.473" />
-      </geometry>
-      <material name="Segment_1-material">
-        <color rgba="0.09084171117479915 0.3231432091022285 0.1844749944900301 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.025" length="0.473" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Axis_2_Joint" type="revolute">
-    <parent link="Segment_1" />
-    <child link="Axis_2" />
-    <origin xyz="0 -5.219894517229704e-17 0.2637568842473722" rpy="1.5707963267948963 0 0" />
-    <axis xyz="0 0 1"/>
-    <limit effort="1000.0" lower="-2.7" upper="2.7" velocity="0.5"/>  </joint>
-  <link name="Axis_2">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.055" length="0.1" />
-      </geometry>
-      <material name="Axis_2-material">
-        <color rgba="0.14702726648767014 0.14126329113044458 0.7304607400847158 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.055" length="0.1" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Axis_2_to_Segment_2" type="fixed">
-    <parent link="Axis_2" />
-    <child link="Segment_2" />
-    <origin xyz="0 0.19535682173790003 0" rpy="-1.5707963267948963 0 0" />
-  </joint>
-  <link name="Segment_2">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.025" length="0.393" />
-      </geometry>
-      <material name="Segment_2-material">
-        <color rgba="0.09084171117479915 0.3231432091022285 0.1844749944900301 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.025" length="0.393" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Axis_3_Joint" type="revolute">
-    <parent link="Segment_2" />
-    <child link="Axis_3" />
-    <origin xyz="0 -4.337792830220178e-17 0.199625776257357" rpy="1.5707963267948963 0 0" />
-    <axis xyz="0 0 1"/>
-    <limit effort="1000.0" lower="-1.6" upper="1.6" velocity="0.5"/>  </joint>
-  <link name="Axis_3">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.05" length="0.1" />
-      </geometry>
-      <material name="Axis_3-material">
-        <color rgba="0.14702726648767014 0.14126329113044458 0.7304607400847158 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.05" length="0.1" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Axis_3_to_Segment_3" type="fixed">
-    <parent link="Axis_3" />
-    <child link="Segment_3" />
-    <origin xyz="0 0.06725724726912972 0" rpy="-1.5707963267948963 0 0" />
-  </joint>
-  <link name="Segment_3">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.025" length="0.135" />
-      </geometry>
-      <material name="Segment_3-material">
-        <color rgba="0.09084171117479915 0.3231432091022285 0.1844749944900301 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.025" length="0.135" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Wrist_Joint" type="revolute">
-    <parent link="Segment_3" />
-    <child link="Axis_4" />
-    <origin xyz="0 0 0.0655808825338593" rpy="0 1.5707963267948966 0" />
-    <axis xyz="0 0 1"/>
-    <limit effort="1000.0" lower="-1.6" upper="1.6" velocity="0.5"/>  </joint>
-  <link name="Axis_4">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.03" length="0.075" />
-      </geometry>
-      <material name="Axis_4-material">
-        <color rgba="0.23455058215026167 0.9301108583738498 0.21952619971859377 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.03" length="0.075" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Continuous_Joint" type="revolute">
-    <parent link="Axis_4" />
-    <child link="Axis_4_C" />
-    <origin xyz="0.0009533507860803557 0 0" rpy="0 -1.5707963267948966 0" />
-    <axis xyz="0 0 1"/>
-    <limit effort="1000.0" lower="-3.14" upper="3.14" velocity="0.5"/>
-  </joint>
-  <link name="Axis_4_C">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.02" length="0.01" />
-      </geometry>
-      <material name="Axis_4_C-material">
-        <color rgba="0.006048833020386069 0.407240211891531 0.15592646369776456 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <cylinder radius="0.02" length="0.01" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.3333333333333333" ixy="0" ixz="0" iyy="0.5" iyz="0" izz="0.3333333333333333" />
-    </inertial>
-  </link>
-  <joint name="Axis_4_C_to_Effector" type="fixed">
-    <parent link="Axis_4_C" />
-    <child link="Effector" />
-    <origin xyz="0 0 0.06478774571448076" rpy="0 0 0" />
-  </joint>
-  <link name="Effector">
-    <visual>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <box size="0.05 0.01 0.135" />
-      </geometry>
-      <material name="Effector-material">
-        <color rgba="0.2746773120495699 0.01680737574872402 0.5711248294565854 1" />
-      </material>
-    </visual>
-    <collision>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <geometry>
-        <box size="0.01 0.01 0.135" />
-      </geometry>
-    </collision>
-    <inertial>
-      <origin xyz="0 0 0" rpy="0 0 0" />
-      <mass value="1" />
-      <inertia ixx="0.16666666666666666" ixy="0" ixz="0" iyy="0.16666666666666666" iyz="0" izz="0.16666666666666666" />
-    </inertial>
-  </link>
-</robot>

src/bio_pkg/bio_pkg/bio_node.py

@@ -9,51 +9,56 @@ import time
 import atexit
 import signal
 from std_msgs.msg import String
-from ros2_interfaces_pkg.msg import BioControl
-from ros2_interfaces_pkg.msg import BioFeedback
+from astra_msgs.msg import BioControl
+from astra_msgs.msg import BioFeedback
 
 serial_pub = None
 thread = None
 
+
 class SerialRelay(Node):
     def __init__(self):
         # Initialize node
         super().__init__("bio_node")
 
         # Get launch mode parameter
-        self.declare_parameter('launch_mode', 'bio')
-        self.launch_mode = self.get_parameter('launch_mode').value
+        self.declare_parameter("launch_mode", "bio")
+        self.launch_mode = self.get_parameter("launch_mode").value
         self.get_logger().info(f"bio launch_mode is: {self.launch_mode}")
 
         # Create publishers
-        self.debug_pub = self.create_publisher(String, '/bio/feedback/debug', 10)
-        self.feedback_pub = self.create_publisher(BioFeedback, '/bio/feedback', 10)
-
+        self.debug_pub = self.create_publisher(String, "/bio/feedback/debug", 10)
+        self.feedback_pub = self.create_publisher(BioFeedback, "/bio/feedback", 10)
 
         # Create subscribers
-        self.control_sub = self.create_subscription(BioControl, '/bio/control', self.send_control, 10)
-        
+        self.control_sub = self.create_subscription(
+            BioControl, "/bio/control", self.send_control, 10
+        )
+
         # Create a publisher for telemetry
         self.telemetry_pub_timer = self.create_timer(1.0, self.publish_feedback)
 
         # Topics used in anchor mode
-        if self.launch_mode == 'anchor':
-            self.anchor_sub = self.create_subscription(String, '/anchor/bio/feedback', self.anchor_feedback, 10)
-            self.anchor_pub = self.create_publisher(String, '/anchor/relay', 10)
+        if self.launch_mode == "anchor":
+            self.anchor_sub = self.create_subscription(
+                String, "/anchor/bio/feedback", self.anchor_feedback, 10
+            )
+            self.anchor_pub = self.create_publisher(String, "/anchor/relay", 10)
 
         self.bio_feedback = BioFeedback()
 
-
         # Search for ports IF in 'arm' (standalone) and not 'anchor' mode
-        if self.launch_mode == 'bio':
+        if self.launch_mode == "bio":
             # Loop through all serial devices on the computer to check for the MCU
             self.port = None
             for i in range(2):
                 try:
                     # connect and send a ping command
-                    set_port = '/dev/ttyACM0' #MCU is controlled through GPIO pins on the PI
+                    set_port = (
+                        "/dev/ttyACM0"  # MCU is controlled through GPIO pins on the PI
+                    )
                     ser = serial.Serial(set_port, 115200, timeout=1)
-                    #print(f"Checking port {port}...")
+                    # print(f"Checking port {port}...")
                     ser.write(b"ping\n")
                     response = ser.read_until("\n")
 
@@ -64,12 +69,14 @@ class SerialRelay(Node):
                         break
                 except:
                     pass
-            
+
             if self.port is None:
-                self.get_logger().info("Unable to find MCU... please make sure it is connected.")
+                self.get_logger().info(
+                    "Unable to find MCU... please make sure it is connected."
+                )
                 time.sleep(1)
                 sys.exit(1)
-            
+
             self.ser = serial.Serial(self.port, 115200)
             atexit.register(self.cleanup)
 
@@ -77,12 +84,12 @@ class SerialRelay(Node):
         global thread
         thread = threading.Thread(target=rclpy.spin, args=(self,), daemon=True)
         thread.start()
-        
-        #if in arm mode, will need to read from the MCU 
+
+        # if in arm mode, will need to read from the MCU
 
         try:
             while rclpy.ok():
-                if self.launch_mode == 'bio':
+                if self.launch_mode == "bio":
                     if self.ser.in_waiting:
                         self.read_mcu()
                     else:
@@ -92,8 +99,7 @@ class SerialRelay(Node):
         finally:
             self.cleanup()
 
-
-    #Currently will just spit out all values over the /arm/feedback/debug topic as strings
+    # Currently will just spit out all values over the /arm/feedback/debug topic as strings
     def read_mcu(self):
         try:
             output = str(self.ser.readline(), "utf8")
@@ -123,69 +129,85 @@ class SerialRelay(Node):
     def send_ik(self, msg):
         pass
 
-
     def send_control(self, msg: BioControl):
         # CITADEL Control Commands
         ################
 
-
         # Chem Pumps, only send if not zero
         if msg.pump_id != 0:
-            command = "can_relay_tovic,citadel,27," + str(msg.pump_id) + "," + str(msg.pump_amount) + "\n"
+            command = (
+                "can_relay_tovic,citadel,27,"
+                + str(msg.pump_id)
+                + ","
+                + str(msg.pump_amount)
+                + "\n"
+            )
             self.send_cmd(command)
         # Fans, only send if not zero
         if msg.fan_id != 0:
-            command = "can_relay_tovic,citadel,40," + str(msg.fan_id) + "," + str(msg.fan_duration) + "\n"
+            command = (
+                "can_relay_tovic,citadel,40,"
+                + str(msg.fan_id)
+                + ","
+                + str(msg.fan_duration)
+                + "\n"
+            )
             self.send_cmd(command)
         # Servos, only send if not zero
         if msg.servo_id != 0:
-            command = "can_relay_tovic,citadel,25," + str(msg.servo_id) + "," + str(int(msg.servo_state)) + "\n"
+            command = (
+                "can_relay_tovic,citadel,25,"
+                + str(msg.servo_id)
+                + ","
+                + str(int(msg.servo_state))
+                + "\n"
+            )
             self.send_cmd(command)
-        
 
         # LSS (SCYTHE)
         command = "can_relay_tovic,citadel,24," + str(msg.bio_arm) + "\n"
-        #self.send_cmd(command)
-        
+        # self.send_cmd(command)
+
         # Vibration Motor
         command += "can_relay_tovic,citadel,26," + str(msg.vibration_motor) + "\n"
-        #self.send_cmd(command)
-        
+        # self.send_cmd(command)
 
-        # FAERIE Control Commands 
+        # FAERIE Control Commands
         ################
-        
+
         # To be reviewed before use#
 
         # Laser
         command += "can_relay_tovic,digit,28," + str(msg.laser) + "\n"
-        #self.send_cmd(command)
+        # self.send_cmd(command)
 
         # Drill (SCABBARD)
         command += f"can_relay_tovic,digit,19,{msg.drill:.2f}\n"
-        #self.send_cmd(command)
+        # self.send_cmd(command)
 
         # Bio linear actuator
         command += "can_relay_tovic,digit,42," + str(msg.drill_arm) + "\n"
         self.send_cmd(command)
 
-
-
     def send_cmd(self, msg: str):
-        if self.launch_mode == 'anchor': #if in anchor mode, send to anchor node to relay
+        if (
+            self.launch_mode == "anchor"
+        ):  # if in anchor mode, send to anchor node to relay
             output = String()
             output.data = msg
             self.anchor_pub.publish(output)
-        elif self.launch_mode == 'bio': #if in standalone mode, send to MCU directly
+        elif self.launch_mode == "bio":  # if in standalone mode, send to MCU directly
             self.get_logger().info(f"[Bio to MCU] {msg}")
             self.ser.write(bytes(msg, "utf8"))
 
     def anchor_feedback(self, msg: String):
         output = msg.data
         parts = str(output.strip()).split(",")
-        #self.get_logger().info(f"[Bio Anchor] {msg.data}")
+        # self.get_logger().info(f"[Bio Anchor] {msg.data}")
 
-        if output.startswith("can_relay_fromvic,citadel,54"):  # bat, 12, 5, Voltage readings * 100
+        if output.startswith(
+            "can_relay_fromvic,citadel,54"
+        ):  # bat, 12, 5, Voltage readings * 100
             self.bio_feedback.bat_voltage = float(parts[3]) / 100.0
             self.bio_feedback.voltage_12 = float(parts[4]) / 100.0
             self.bio_feedback.voltage_5 = float(parts[5]) / 100.0
@@ -199,7 +221,7 @@ class SerialRelay(Node):
     @staticmethod
     def list_serial_ports():
         return glob.glob("/dev/ttyUSB*") + glob.glob("/dev/ttyACM*")
-        #return glob.glob("/dev/tty[A-Za-z]*")
+        # return glob.glob("/dev/tty[A-Za-z]*")
 
     def cleanup(self):
         print("Cleaning up...")
@@ -209,11 +231,13 @@ class SerialRelay(Node):
         except Exception as e:
             exit(0)
 
+
 def myexcepthook(type, value, tb):
     print("Uncaught exception:", type, value)
     if serial_pub:
         serial_pub.cleanup()
 
+
 def main(args=None):
     rclpy.init(args=args)
     sys.excepthook = myexcepthook
@@ -222,7 +246,10 @@ def main(args=None):
     serial_pub = SerialRelay()
     serial_pub.run()
 
-if __name__ == '__main__':
-    #signal.signal(signal.SIGTSTP, lambda signum, frame: sys.exit(0))  # Catch Ctrl+Z and exit cleanly
-    signal.signal(signal.SIGTERM, lambda signum, frame: sys.exit(0))  # Catch termination signals and exit cleanly
+
+if __name__ == "__main__":
+    # signal.signal(signal.SIGTSTP, lambda signum, frame: sys.exit(0))  # Catch Ctrl+Z and exit cleanly
+    signal.signal(
+        signal.SIGTERM, lambda signum, frame: sys.exit(0)
+    )  # Catch termination signals and exit cleanly
     main()

src/bio_pkg/package.xml

@@ -9,7 +9,7 @@
 
   <depend>rclpy</depend>
   <depend>common_interfaces</depend>
-  <depend>ros2_interfaces_pkg</depend>
+  <depend>astra_msgs</depend>
 
   <test_depend>ament_copyright</test_depend>
   <test_depend>ament_flake8</test_depend>

src/bio_pkg/setup.py

@@ -1,25 +1,22 @@
 from setuptools import find_packages, setup
 
-package_name = 'bio_pkg'
+package_name = "bio_pkg"
 
 setup(
     name=package_name,
-    version='0.0.0',
-    packages=find_packages(exclude=['test']),
+    version="0.0.0",
+    packages=find_packages(exclude=["test"]),
     data_files=[
-        ('share/ament_index/resource_index/packages',
-            ['resource/' + package_name]),
-        ('share/' + package_name, ['package.xml']),
+        ("share/ament_index/resource_index/packages", ["resource/" + package_name]),
+        ("share/" + package_name, ["package.xml"]),
     ],
-    install_requires=['setuptools'],
+    install_requires=["setuptools"],
     zip_safe=True,
-    maintainer='tristan',
-    maintainer_email='tristanmcginnis26@gmail.com',
-    description='TODO: Package description',
-    license='TODO: License declaration',
+    maintainer="tristan",
+    maintainer_email="tristanmcginnis26@gmail.com",
+    description="TODO: Package description",
+    license="TODO: License declaration",
     entry_points={
-        'console_scripts': [
-            'bio = bio_pkg.bio_node:main'
-        ],
+        "console_scripts": ["bio = bio_pkg.bio_node:main"],
     },
 )

src/core_pkg/core_pkg/core_headless.py

@@ -13,21 +13,24 @@ import os
 
 import importlib
 from std_msgs.msg import String
-from ros2_interfaces_pkg.msg import CoreControl
+from astra_msgs.msg import CoreControl
 
 
 os.environ["SDL_VIDEODRIVER"] = "dummy"  # Prevents pygame from trying to open a display
-os.environ["SDL_AUDIODRIVER"] = "dummy"  # Force pygame to use a dummy audio driver before pygame.init()
+os.environ["SDL_AUDIODRIVER"] = (
+    "dummy"  # Force pygame to use a dummy audio driver before pygame.init()
+)
 
 
-max_speed = 90 #Max speed as a duty cycle percentage (1-100)
+max_speed = 90  # Max speed as a duty cycle percentage (1-100)
+
 
 class Headless(Node):
     def __init__(self):
         # Initialize pygame first
         pygame.init()
         pygame.joystick.init()
-        
+
         # Wait for a gamepad to be connected
         self.gamepad = None
         print("Waiting for gamepad connection...")
@@ -39,23 +42,25 @@ class Headless(Node):
                     sys.exit(0)
             time.sleep(1.0)  # Check every second
             print("No gamepad found. Waiting...")
-        
+
         # Initialize the gamepad
         self.gamepad = pygame.joystick.Joystick(0)
         self.gamepad.init()
-        print(f'Gamepad Found: {self.gamepad.get_name()}')
-        
+        print(f"Gamepad Found: {self.gamepad.get_name()}")
+
         # Now initialize the ROS2 node
         super().__init__("core_headless")
         self.create_timer(0.15, self.send_controls)
-        self.publisher = self.create_publisher(CoreControl, '/core/control', 10)
-        self.lastMsg = String()  # Used to ignore sending controls repeatedly when they do not change
+        self.publisher = self.create_publisher(CoreControl, "/core/control", 10)
+        self.lastMsg = (
+            String()
+        )  # Used to ignore sending controls repeatedly when they do not change
 
     def run(self):
         # This thread makes all the update processes run in the background
         thread = threading.Thread(target=rclpy.spin, args={self}, daemon=True)
         thread.start()
-        
+
         try:
             while rclpy.ok():
                 self.send_controls()
@@ -68,7 +73,7 @@ class Headless(Node):
             if event.type == pygame.QUIT:
                 pygame.quit()
                 sys.exit(0)
-        
+
         # Check if controller is still connected
         if pygame.joystick.get_count() == 0:
             print("Gamepad disconnected. Exiting...")
@@ -82,7 +87,7 @@ class Headless(Node):
             # Clean up
             pygame.quit()
             sys.exit(0)
-            
+
         input = CoreControl()
         input.max_speed = max_speed
         input.right_stick = -1 * round(self.gamepad.get_axis(4), 2)  # right y-axis
@@ -91,15 +96,17 @@ class Headless(Node):
         else:
             input.left_stick = -1 * round(self.gamepad.get_axis(1), 2)  # left y-axis
 
-        output = f'L: {input.left_stick}, R: {input.right_stick}, M: {max_speed}'
+        output = f"L: {input.left_stick}, R: {input.right_stick}, M: {max_speed}"
         self.get_logger().info(f"[Ctrl] {output}")
         self.publisher.publish(input)
 
+
 def main(args=None):
     rclpy.init(args=args)
     node = Headless()
     rclpy.spin(node)
     rclpy.shutdown()
 
-if __name__ == '__main__':
+
+if __name__ == "__main__":
     main()

src/core_pkg/core_pkg/core_node.py

@@ -19,8 +19,8 @@ from math import copysign, pi
 from std_msgs.msg import String, Header
 from sensor_msgs.msg import Imu, NavSatFix, NavSatStatus, JointState
 from geometry_msgs.msg import TwistStamped, Twist
-from ros2_interfaces_pkg.msg import CoreControl, CoreFeedback, RevMotorState
-from ros2_interfaces_pkg.msg import VicCAN, NewCoreFeedback, Barometer, CoreCtrlState
+from astra_msgs.msg import CoreControl, CoreFeedback, RevMotorState
+from astra_msgs.msg import VicCAN, NewCoreFeedback, Barometer, CoreCtrlState
 
 
 serial_pub = None
@@ -33,12 +33,12 @@ CORE_GEAR_RATIO = 100.0  # Clucky: 100:1, Testbed: 64:1
 control_qos = qos.QoSProfile(
     history=qos.QoSHistoryPolicy.KEEP_LAST,
     depth=2,
-    reliability=qos.QoSReliabilityPolicy.BEST_EFFORT,
+    reliability=qos.QoSReliabilityPolicy.BEST_EFFORT,  # Best Effort subscribers are still compatible with Reliable publishers
     durability=qos.QoSDurabilityPolicy.VOLATILE,
-    deadline=Duration(seconds=1),
-    lifespan=Duration(nanoseconds=500_000_000),  # 500ms
-    liveliness=qos.QoSLivelinessPolicy.SYSTEM_DEFAULT,
-    liveliness_lease_duration=Duration(seconds=5)
+    # deadline=Duration(seconds=1),
+    # lifespan=Duration(nanoseconds=500_000_000),  # 500ms
+    # liveliness=qos.QoSLivelinessPolicy.SYSTEM_DEFAULT,
+    # liveliness_lease_duration=Duration(seconds=5),
 )
 
 # Used to verify the length of an incoming VicCAN feedback message
@@ -52,7 +52,7 @@ viccan_msg_len_dict = {
     53: 4,
     54: 4,
     56: 4,  # really 3, but viccan
-    58: 4   # ditto
+    58: 4,  # ditto
 }
 
 
@@ -62,77 +62,110 @@ class SerialRelay(Node):
         super().__init__("core_node")
 
         # Launch mode -- anchor vs core
-        self.declare_parameter('launch_mode', 'core')
-        self.launch_mode = self.get_parameter('launch_mode').value
+        self.declare_parameter("launch_mode", "core")
+        self.launch_mode = self.get_parameter("launch_mode").value
         self.get_logger().info(f"Core launch_mode is: {self.launch_mode}")
 
-
         ##################################################
         # Topics
 
         # Anchor
-        if self.launch_mode == 'anchor':
-            self.anchor_fromvic_sub_ = self.create_subscription(VicCAN, '/anchor/from_vic/core', self.relay_fromvic, 20)
-            self.anchor_tovic_pub_ = self.create_publisher(VicCAN, '/anchor/to_vic/relay', 20)
+        if self.launch_mode == "anchor":
+            self.anchor_fromvic_sub_ = self.create_subscription(
+                VicCAN, "/anchor/from_vic/core", self.relay_fromvic, 20
+            )
+            self.anchor_tovic_pub_ = self.create_publisher(
+                VicCAN, "/anchor/to_vic/relay", 20
+            )
 
-            self.anchor_sub = self.create_subscription(String, '/anchor/core/feedback', self.anchor_feedback, 10)
-            self.anchor_pub = self.create_publisher(String, '/anchor/relay', 10)
+            self.anchor_sub = self.create_subscription(
+                String, "/anchor/core/feedback", self.anchor_feedback, 10
+            )
+            self.anchor_pub = self.create_publisher(String, "/anchor/relay", 10)
 
         # Control
 
         # autonomy twist -- m/s and rad/s -- for autonomy, in particular Nav2
-        self.cmd_vel_sub_ = self.create_subscription(TwistStamped, '/cmd_vel', self.cmd_vel_callback, 1)
+        self.cmd_vel_sub_ = self.create_subscription(
+            TwistStamped, "/cmd_vel", self.cmd_vel_callback, 1
+        )
         # manual twist -- [-1, 1] rather than real units
-        self.twist_man_sub_ = self.create_subscription(Twist, '/core/twist', self.twist_man_callback, qos_profile=control_qos)
+        self.twist_man_sub_ = self.create_subscription(
+            Twist, "/core/twist", self.twist_man_callback, qos_profile=control_qos
+        )
         # manual flags -- brake mode and max duty cycle
-        self.control_state_sub_ = self.create_subscription(CoreCtrlState, '/core/control/state', self.control_state_callback, qos_profile=control_qos)
-        self.twist_max_duty = 0.5  # max duty cycle for twist commands (0.0 - 1.0); walking speed is 0.5
+        self.control_state_sub_ = self.create_subscription(
+            CoreCtrlState,
+            "/core/control/state",
+            self.control_state_callback,
+            qos_profile=control_qos,
+        )
+        self.twist_max_duty = (
+            0.5  # max duty cycle for twist commands (0.0 - 1.0); walking speed is 0.5
+        )
 
         # Feedback
 
         # Consolidated and organized core feedback
-        self.feedback_new_pub_ = self.create_publisher(NewCoreFeedback, '/core/feedback_new', qos_profile=qos.qos_profile_sensor_data)
+        self.feedback_new_pub_ = self.create_publisher(
+            NewCoreFeedback,
+            "/core/feedback_new",
+            qos_profile=qos.qos_profile_sensor_data,
+        )
         self.feedback_new_state = NewCoreFeedback()
         self.feedback_new_state.fl_motor.id = 1
         self.feedback_new_state.bl_motor.id = 2
         self.feedback_new_state.fr_motor.id = 3
         self.feedback_new_state.br_motor.id = 4
-        self.telemetry_pub_timer = self.create_timer(1.0, self.publish_feedback)  # TODO: not sure about this
+        self.telemetry_pub_timer = self.create_timer(
+            1.0, self.publish_feedback
+        )  # TODO: not sure about this
         # Joint states for topic-based controller
-        self.joint_state_pub_ = self.create_publisher(JointState, '/core/joint_states', qos_profile=qos.qos_profile_sensor_data)
+        self.joint_state_pub_ = self.create_publisher(
+            JointState, "/core/joint_states", qos_profile=qos.qos_profile_sensor_data
+        )
         # IMU (embedded BNO-055)
-        self.imu_pub_ = self.create_publisher(Imu, '/core/imu', qos_profile=qos.qos_profile_sensor_data)
+        self.imu_pub_ = self.create_publisher(
+            Imu, "/core/imu", qos_profile=qos.qos_profile_sensor_data
+        )
         self.imu_state = Imu()
         self.imu_state.header.frame_id = "core_bno055"
         # GPS (embedded u-blox M9N)
-        self.gps_pub_ = self.create_publisher(NavSatFix, '/gps/fix', qos_profile=qos.qos_profile_sensor_data)
+        self.gps_pub_ = self.create_publisher(
+            NavSatFix, "/gps/fix", qos_profile=qos.qos_profile_sensor_data
+        )
         self.gps_state = NavSatFix()
         self.gps_state.header.frame_id = "core_gps_antenna"
         self.gps_state.status.service = NavSatStatus.SERVICE_GPS
         self.gps_state.status.status = NavSatStatus.STATUS_NO_FIX
         self.gps_state.position_covariance_type = NavSatFix.COVARIANCE_TYPE_UNKNOWN
         # Barometer (embedded BMP-388)
-        self.baro_pub_ = self.create_publisher(Barometer, '/core/baro', qos_profile=qos.qos_profile_sensor_data)
+        self.baro_pub_ = self.create_publisher(
+            Barometer, "/core/baro", qos_profile=qos.qos_profile_sensor_data
+        )
         self.baro_state = Barometer()
         self.baro_state.header.frame_id = "core_bmp388"
 
         # Old
-        
+
         # /core/control
-        self.control_sub = self.create_subscription(CoreControl, '/core/control', self.send_controls, 10)  # old control method -- left_stick, right_stick, max_speed, brake, and some other random autonomy stuff
+        self.control_sub = self.create_subscription(
+            CoreControl, "/core/control", self.send_controls, 10
+        )  # old control method -- left_stick, right_stick, max_speed, brake, and some other random autonomy stuff
         # /core/feedback
-        self.feedback_pub = self.create_publisher(CoreFeedback, '/core/feedback', 10)
+        self.feedback_pub = self.create_publisher(CoreFeedback, "/core/feedback", 10)
         self.core_feedback = CoreFeedback()
         # Debug
-        self.debug_pub = self.create_publisher(String, '/core/debug', 10)
-        self.ping_service = self.create_service(Empty, '/astra/core/ping', self.ping_callback)
-
+        self.debug_pub = self.create_publisher(String, "/core/debug", 10)
+        self.ping_service = self.create_service(
+            Empty, "/astra/core/ping", self.ping_callback
+        )
 
         ##################################################
         # Find microcontroller (Non-anchor only)
 
         # Core (non-anchor) specific
-        if self.launch_mode == 'core':
+        if self.launch_mode == "core":
             # Loop through all serial devices on the computer to check for the MCU
             self.port = None
             ports = SerialRelay.list_serial_ports()
@@ -141,7 +174,7 @@ class SerialRelay(Node):
                     try:
                         # connect and send a ping command
                         ser = serial.Serial(port, 115200, timeout=1)
-                        #(f"Checking port {port}...")
+                        # (f"Checking port {port}...")
                         ser.write(b"ping\n")
                         response = ser.read_until("\n")  # type: ignore
 
@@ -156,17 +189,16 @@ class SerialRelay(Node):
                         pass
                 if self.port is not None:
                     break
-        
+
             if self.port is None:
                 self.get_logger().info("Unable to find MCU...")
                 time.sleep(1)
                 sys.exit(1)
-        
+
             self.ser = serial.Serial(self.port, 115200)
             atexit.register(self.cleanup)
         # end __init__()
 
-
     def run(self):
         # This thread makes all the update processes run in the background
         global thread
@@ -175,15 +207,15 @@ class SerialRelay(Node):
 
         try:
             while rclpy.ok():
-                if self.launch_mode == 'core':
-                    self.read_MCU() # Check the MCU for updates
+                if self.launch_mode == "core":
+                    self.read_MCU()  # Check the MCU for updates
         except KeyboardInterrupt:
             sys.exit(0)
 
     def read_MCU(self):  # NON-ANCHOR SPECIFIC
         try:
             output = str(self.ser.readline(), "utf8")
-            
+
             if output:
                 # All output over debug temporarily
                 print(f"[MCU] {output}")
@@ -213,8 +245,8 @@ class SerialRelay(Node):
     def scale_duty(self, value: float, max_speed: float):
         leftMin = -1
         leftMax = 1
-        rightMin = -max_speed/100.0
-        rightMax = max_speed/100.0
+        rightMin = -max_speed / 100.0
+        rightMax = max_speed / 100.0
 
         # Figure out how 'wide' each range is
         leftSpan = leftMax - leftMin
@@ -227,17 +259,29 @@ class SerialRelay(Node):
         return str(rightMin + (valueScaled * rightSpan))
 
     def send_controls(self, msg: CoreControl):
-        if(msg.turn_to_enable):
-            command = "can_relay_tovic,core,41," + str(msg.turn_to) + ',' + str(msg.turn_to_timeout) + '\n' 
+        if msg.turn_to_enable:
+            command = (
+                "can_relay_tovic,core,41,"
+                + str(msg.turn_to)
+                + ","
+                + str(msg.turn_to_timeout)
+                + "\n"
+            )
         else:
-            command = "can_relay_tovic,core,19," + self.scale_duty(msg.left_stick, msg.max_speed) + ',' + self.scale_duty(msg.right_stick, msg.max_speed) + '\n'
+            command = (
+                "can_relay_tovic,core,19,"
+                + self.scale_duty(msg.left_stick, msg.max_speed)
+                + ","
+                + self.scale_duty(msg.right_stick, msg.max_speed)
+                + "\n"
+            )
         self.send_cmd(command)
 
         # Brake mode
-        command = "can_relay_tovic,core,18," + str(int(msg.brake)) + '\n'
+        command = "can_relay_tovic,core,18," + str(int(msg.brake)) + "\n"
         self.send_cmd(command)
 
-        #print(f"[Sys] Relaying: {command}")
+        # print(f"[Sys] Relaying: {command}")
 
     def cmd_vel_callback(self, msg: TwistStamped):
         linear = msg.twist.linear.x
@@ -248,20 +292,22 @@ class SerialRelay(Node):
 
         vel_left_rpm = round((vel_left_rads * 60) / (2 * 3.14159)) * CORE_GEAR_RATIO
         vel_right_rpm = round((vel_right_rads * 60) / (2 * 3.14159)) * CORE_GEAR_RATIO
-        
+
         self.send_viccan(20, [vel_left_rpm, vel_right_rpm])
 
     def twist_man_callback(self, msg: Twist):
         linear = msg.linear.x  # [-1 1] for forward/back from left stick y
         angular = msg.angular.z  # [-1 1] for left/right from right stick x
 
-        if (linear < 0):  # reverse turning direction when going backwards (WIP)
+        if linear < 0:  # reverse turning direction when going backwards (WIP)
             angular *= -1
 
         if abs(linear) > 1 or abs(angular) > 1:
             # if speed is greater than 1, then there is a problem
             # make it look like a problem and don't just run away lmao
-            linear = copysign(0.25, linear)  # 0.25 duty cycle in direction of control (hopefully slow)
+            linear = copysign(
+                0.25, linear
+            )  # 0.25 duty cycle in direction of control (hopefully slow)
             angular = copysign(0.25, angular)
 
         duty_left = linear - angular
@@ -272,8 +318,12 @@ class SerialRelay(Node):
 
         # Apply max duty cycle
         # Joysticks provide values [-1, 1] rather than real units
-        duty_left = map_range(duty_left, -1, 1, -self.twist_max_duty, self.twist_max_duty)
-        duty_right = map_range(duty_right, -1, 1, -self.twist_max_duty, self.twist_max_duty)
+        duty_left = map_range(
+            duty_left, -1, 1, -self.twist_max_duty, self.twist_max_duty
+        )
+        duty_right = map_range(
+            duty_right, -1, 1, -self.twist_max_duty, self.twist_max_duty
+        )
 
         self.send_viccan(19, [duty_left, duty_right])
 
@@ -285,24 +335,24 @@ class SerialRelay(Node):
         self.twist_max_duty = msg.max_duty  # twist_man_callback will handle this
 
     def send_cmd(self, msg: str):
-        if self.launch_mode == 'anchor':
-            #self.get_logger().info(f"[Core to Anchor Relay] {msg}")
-            output = String()#Convert to std_msg string
+        if self.launch_mode == "anchor":
+            # self.get_logger().info(f"[Core to Anchor Relay] {msg}")
+            output = String()  # Convert to std_msg string
             output.data = msg
             self.anchor_pub.publish(output)
-        elif self.launch_mode == 'core':
+        elif self.launch_mode == "core":
             self.get_logger().info(f"[Core to MCU] {msg}")
             self.ser.write(bytes(msg, "utf8"))
 
-
     def send_viccan(self, cmd_id: int, data: list[float]):
-        self.anchor_tovic_pub_.publish(VicCAN(
-            header=Header(stamp=self.get_clock().now().to_msg(), frame_id="to_vic"),
-            mcu_name="core",
-            command_id=cmd_id,
-            data=data
-        ))
-
+        self.anchor_tovic_pub_.publish(
+            VicCAN(
+                header=Header(stamp=self.get_clock().now().to_msg(), frame_id="to_vic"),
+                mcu_name="core",
+                command_id=cmd_id,
+                data=data,
+            )
+        )
 
     def anchor_feedback(self, msg: String):
         output = msg.data
@@ -366,7 +416,7 @@ class SerialRelay(Node):
             return
         self.feedback_new_state.header.stamp = self.get_clock().now().to_msg()
         self.feedback_new_pub_.publish(self.feedback_new_state)
-        #self.get_logger().info(f"[Core Anchor] {msg}")
+        # self.get_logger().info(f"[Core Anchor] {msg}")
 
     def relay_fromvic(self, msg: VicCAN):
         # Assume that the message is coming from Core
@@ -376,7 +426,9 @@ class SerialRelay(Node):
         if msg.command_id in viccan_msg_len_dict:
             expected_len = viccan_msg_len_dict[msg.command_id]
             if len(msg.data) != expected_len:
-                self.get_logger().warning(f"Ignoring VicCAN message with id {msg.command_id} due to unexpected data length (expected {expected_len}, got {len(msg.data)})")
+                self.get_logger().warning(
+                    f"Ignoring VicCAN message with id {msg.command_id} due to unexpected data length (expected {expected_len}, got {len(msg.data)})"
+                )
                 return
 
         match msg.command_id:
@@ -386,7 +438,11 @@ class SerialRelay(Node):
             case 49:  # GNSS Longitude
                 self.gps_state.longitude = float(msg.data[0])
             case 50:  # GNSS Satellite count and altitude
-                self.gps_state.status.status = NavSatStatus.STATUS_FIX if int(msg.data[0]) >= 3 else NavSatStatus.STATUS_NO_FIX
+                self.gps_state.status.status = (
+                    NavSatStatus.STATUS_FIX
+                    if int(msg.data[0]) >= 3
+                    else NavSatStatus.STATUS_NO_FIX
+                )
                 self.gps_state.altitude = float(msg.data[1])
                 self.gps_state.header.stamp = msg.header.stamp
                 self.gps_pub_.publish(self.gps_state)
@@ -402,7 +458,7 @@ class SerialRelay(Node):
                 self.imu_state.linear_acceleration.y = float(msg.data[1])
                 self.imu_state.linear_acceleration.z = float(msg.data[2])
                 # Deal with quaternion
-                r = Rotation.from_euler('z', float(msg.data[3]), degrees=True)
+                r = Rotation.from_euler("z", float(msg.data[3]), degrees=True)
                 q = r.as_quat()
                 self.imu_state.orientation.x = q[0]
                 self.imu_state.orientation.y = q[1]
@@ -427,7 +483,9 @@ class SerialRelay(Node):
                     case 4:
                         motor = self.feedback_new_state.br_motor
                     case _:
-                        self.get_logger().warning(f"Ignoring REV motor feedback 53 with invalid motorId {motorId}")
+                        self.get_logger().warning(
+                            f"Ignoring REV motor feedback 53 with invalid motorId {motorId}"
+                        )
                         return
 
                 if motor:
@@ -455,9 +513,15 @@ class SerialRelay(Node):
                 motorId = round(float(msg.data[0]))
                 position = float(msg.data[1])
                 velocity = float(msg.data[2])
-                joint_state_msg = JointState()  # TODO: not sure if all motors should be in each message or not
-                joint_state_msg.position = [position * (2 * pi) / CORE_GEAR_RATIO]  # revolutions to radians
-                joint_state_msg.velocity = [velocity * (2 * pi / 60.0) / CORE_GEAR_RATIO]  # RPM to rad/s
+                joint_state_msg = (
+                    JointState()
+                )  # TODO: not sure if all motors should be in each message or not
+                joint_state_msg.position = [
+                    position * (2 * pi) / CORE_GEAR_RATIO
+                ]  # revolutions to radians
+                joint_state_msg.velocity = [
+                    velocity * (2 * pi / 60.0) / CORE_GEAR_RATIO
+                ]  # RPM to rad/s
 
                 motor: RevMotorState | None = None
 
@@ -475,7 +539,9 @@ class SerialRelay(Node):
                         motor = self.feedback_new_state.br_motor
                         joint_state_msg.name = ["br_motor_joint"]
                     case _:
-                        self.get_logger().warning(f"Ignoring REV motor feedback 58 with invalid motorId {motorId}")
+                        self.get_logger().warning(
+                            f"Ignoring REV motor feedback 58 with invalid motorId {motorId}"
+                        )
                         return
 
                 joint_state_msg.header.stamp = msg.header.stamp
@@ -483,19 +549,17 @@ class SerialRelay(Node):
             case _:
                 return
 
-
     def publish_feedback(self):
-        #self.get_logger().info(f"[Core] {self.core_feedback}")
+        # self.get_logger().info(f"[Core] {self.core_feedback}")
         self.feedback_pub.publish(self.core_feedback)
 
     def ping_callback(self, request, response):
         return response
 
-
     @staticmethod
     def list_serial_ports():
         return glob.glob("/dev/ttyUSB*") + glob.glob("/dev/ttyACM*")
-    
+
     def cleanup(self):
         print("Cleaning up before terminating...")
         try:
@@ -510,20 +574,26 @@ def myexcepthook(type, value, tb):
     if serial_pub:
         serial_pub.cleanup()
 
-def map_range(value: float, in_min: float, in_max: float, out_min: float, out_max: float):
+
+def map_range(
+    value: float, in_min: float, in_max: float, out_min: float, out_max: float
+):
     return (value - in_min) * (out_max - out_min) / (in_max - in_min) + out_min
 
 
 def main(args=None):
-   rclpy.init(args=args)
-   sys.excepthook = myexcepthook
+    rclpy.init(args=args)
+    sys.excepthook = myexcepthook
 
-   global serial_pub
+    global serial_pub
 
-   serial_pub = SerialRelay()
-   serial_pub.run()
+    serial_pub = SerialRelay()
+    serial_pub.run()
 
-if __name__ == '__main__':
-    #signal.signal(signal.SIGTSTP, lambda signum, frame: sys.exit(0))  # Catch Ctrl+Z and exit cleanly
-    signal.signal(signal.SIGTERM, lambda signum, frame: sys.exit(0))  # Catch termination signals and exit cleanly
+
+if __name__ == "__main__":
+    # signal.signal(signal.SIGTSTP, lambda signum, frame: sys.exit(0))  # Catch Ctrl+Z and exit cleanly
+    signal.signal(
+        signal.SIGTERM, lambda signum, frame: sys.exit(0)
+    )  # Catch termination signals and exit cleanly
     main()

src/core_pkg/core_pkg/core_ptz.py

@@ -9,7 +9,7 @@ import threading
 import time
 
 from std_msgs.msg import String
-from ros2_interfaces_pkg.msg import PtzControl, PtzFeedback
+from astra_msgs.msg import PtzControl, PtzFeedback
 
 # Import the SIYI SDK
 from core_pkg.siyi_sdk import (
@@ -18,55 +18,63 @@ from core_pkg.siyi_sdk import (
     DataStreamType,
     DataStreamFrequency,
     SingleAxis,
-    AttitudeData
+    AttitudeData,
 )
 
+
 class PtzNode(Node):
     def __init__(self):
         # Initialize node with name
         super().__init__("core_ptz")
 
         # Declare parameters
-        self.declare_parameter('camera_ip', '192.168.1.9')
-        self.declare_parameter('camera_port', 37260)
-        
+        self.declare_parameter("camera_ip", "192.168.1.9")
+        self.declare_parameter("camera_port", 37260)
+
         # Get parameters
-        self.camera_ip = self.get_parameter('camera_ip').value
-        self.camera_port = self.get_parameter('camera_port').value
-        
-        self.get_logger().info(f"PTZ camera IP: {self.camera_ip} Port: {self.camera_port}")
-        
+        self.camera_ip = self.get_parameter("camera_ip").value
+        self.camera_port = self.get_parameter("camera_port").value
+
+        self.get_logger().info(
+            f"PTZ camera IP: {self.camera_ip} Port: {self.camera_port}"
+        )
+
         # Create a camera instance
         self.camera = None
-        self.camera_connected = False # This flag is still managed but not used to gate commands
+        self.camera_connected = (
+            False  # This flag is still managed but not used to gate commands
+        )
         self.loop = None
         self.thread_pool = None
-        
+
         # Create publishers
-        self.feedback_pub = self.create_publisher(PtzFeedback, '/ptz/feedback', 10)
-        self.debug_pub = self.create_publisher(String, '/ptz/debug', 10)
-        
+        self.feedback_pub = self.create_publisher(PtzFeedback, "/ptz/feedback", 10)
+        self.debug_pub = self.create_publisher(String, "/ptz/debug", 10)
+
         # Create subscribers
         self.control_sub = self.create_subscription(
-            PtzControl, '/ptz/control', self.handle_control_command, 10)
-            
+            PtzControl, "/ptz/control", self.handle_control_command, 10
+        )
+
         # Create timers
         self.connection_timer = self.create_timer(5.0, self.check_camera_connection)
         self.last_data_time = time.time()
         self.health_check_timer = self.create_timer(2.0, self.check_camera_health)
-        
+
         # Create feedback message
         self.feedback_msg = PtzFeedback()
-        self.feedback_msg.connected = False # This will reflect the actual connection state
+        self.feedback_msg.connected = (
+            False  # This will reflect the actual connection state
+        )
         self.feedback_msg.error_msg = "Initializing"
-        
+
         # Flags for async operations
         self.shutdown_requested = False
-        
+
         # Set up asyncio event loop in a separate thread
         self.thread_pool = ThreadPoolExecutor(max_workers=1)
         self.loop = asyncio.new_event_loop()
-        
+
         # Connect to camera on startup
         self.connect_task = self.thread_pool.submit(
             self.run_async_func, self.connect_to_camera()
@@ -77,28 +85,27 @@ class PtzNode(Node):
         try:
             # Create a new camera instance
             self.camera = SiyiGimbalCamera(ip=self.camera_ip, port=self.camera_port)
-            
+
             # Connect to the camera
             await self.camera.connect()
-            
+
             # Set up data callback
             self.camera.set_data_callback(self.camera_data_callback)
-            
+
             # Request attitude data stream
             await self.camera.send_data_stream_request(
-                DataStreamType.ATTITUDE_DATA,
-                DataStreamFrequency.HZ_10
+                DataStreamType.ATTITUDE_DATA, DataStreamFrequency.HZ_10
             )
-            
+
             # Update connection status
             self.camera_connected = True
             self.feedback_msg.connected = True
             self.feedback_msg.error_msg = ""
-            
+
             self.publish_debug("Camera connected successfully")
-            
+
         except Exception as e:
-            self.camera_connected = False 
+            self.camera_connected = False
             self.feedback_msg.connected = False
             self.feedback_msg.error_msg = f"Connection error: {str(e)}"
             self.publish_debug(f"Camera connection failed: {str(e)}")
@@ -108,8 +115,12 @@ class PtzNode(Node):
         # Update last_data_time regardless of self.camera_connected,
         # as data might arrive during a brief reconnect window.
         self.last_data_time = time.time()
-        if self.camera_connected: # Only process for feedback if we believe we are connected
-            if cmd_id == CommandID.ATTITUDE_DATA_RESPONSE and isinstance(data, AttitudeData):
+        if (
+            self.camera_connected
+        ):  # Only process for feedback if we believe we are connected
+            if cmd_id == CommandID.ATTITUDE_DATA_RESPONSE and isinstance(
+                data, AttitudeData
+            ):
                 self.feedback_msg.yaw = data.yaw
                 self.feedback_msg.pitch = data.pitch
                 self.feedback_msg.roll = data.roll
@@ -123,36 +134,39 @@ class PtzNode(Node):
                     debug_str = f"Camera data: CMD_ID={cmd_id.name}, Data="
                 else:
                     debug_str = f"Camera data: CMD_ID={cmd_id}, Data="
-                
+
                 if isinstance(data, bytes):
                     debug_str += data.hex()
                 else:
                     debug_str += str(data)
                 self.get_logger().debug(debug_str)
 
-
     def check_camera_connection(self):
         """Periodically check camera connection and attempt to reconnect if needed."""
         if not self.camera_connected and not self.shutdown_requested:
             self.publish_debug("Attempting to reconnect to camera...")
             if self.camera:
                 try:
-                    if self.camera.is_connected: # SDK's internal connection state
-                         self.run_async_func(self.camera.disconnect())
+                    if self.camera.is_connected:  # SDK's internal connection state
+                        self.run_async_func(self.camera.disconnect())
                 except Exception as e:
-                    self.get_logger().debug(f"Error during pre-reconnect disconnect: {e}")
+                    self.get_logger().debug(
+                        f"Error during pre-reconnect disconnect: {e}"
+                    )
                 # self.camera = None # Don't nullify here, connect_to_camera will re-assign or create new
-                
+
             self.connect_task = self.thread_pool.submit(
                 self.run_async_func, self.connect_to_camera()
             )
 
     def check_camera_health(self):
         """Check if we're still receiving data from the camera"""
-        if self.camera_connected: # Only check health if we think we are connected
+        if self.camera_connected:  # Only check health if we think we are connected
             time_since_last_data = time.time() - self.last_data_time
             if time_since_last_data > 5.0:
-                self.publish_debug(f"No camera data for {time_since_last_data:.1f}s, marking as disconnected.")
+                self.publish_debug(
+                    f"No camera data for {time_since_last_data:.1f}s, marking as disconnected."
+                )
                 self.camera_connected = False
                 self.feedback_msg.connected = False
                 self.feedback_msg.error_msg = "Connection stale (no data)"
@@ -161,19 +175,20 @@ class PtzNode(Node):
     def handle_control_command(self, msg):
         """Handle incoming control commands."""
         # Removed: if not self.camera_connected
-        if not self.camera: # Still check if camera object exists
-            self.get_logger().warning("Camera object not initialized, ignoring control command")
+        if not self.camera:  # Still check if camera object exists
+            self.get_logger().warning(
+                "Camera object not initialized, ignoring control command"
+            )
             return
-            
-        self.thread_pool.submit(
-            self.run_async_func,
-            self.process_control_command(msg)
-        )
+
+        self.thread_pool.submit(self.run_async_func, self.process_control_command(msg))
 
     async def process_control_command(self, msg):
         """Process and send the control command to the camera."""
-        if not self.camera: 
-            self.get_logger().error("Process control command called but camera object is None.")
+        if not self.camera:
+            self.get_logger().error(
+                "Process control command called but camera object is None."
+            )
             return
         try:
             # The SDK's send_... methods will raise RuntimeError if not connected.
@@ -182,43 +197,55 @@ class PtzNode(Node):
                 self.get_logger().info("Attempting to reset camera to center position")
                 await self.camera.send_attitude_angles_command(0.0, 0.0)
                 return
-                
+
             if msg.control_mode == 0:
                 turn_yaw = max(-100, min(100, int(msg.turn_yaw)))
                 turn_pitch = max(-100, min(100, int(msg.turn_pitch)))
-                self.get_logger().debug(f"Attempting rotation: yaw_speed={turn_yaw}, pitch_speed={turn_pitch}")
+                self.get_logger().debug(
+                    f"Attempting rotation: yaw_speed={turn_yaw}, pitch_speed={turn_pitch}"
+                )
                 await self.camera.send_rotation_command(turn_yaw, turn_pitch)
-                
+
             elif msg.control_mode == 1:
                 yaw = max(-135.0, min(135.0, msg.yaw))
                 pitch = max(-90.0, min(90.0, msg.pitch))
-                self.get_logger().debug(f"Attempting absolute angles: yaw={yaw}, pitch={pitch}")
+                self.get_logger().debug(
+                    f"Attempting absolute angles: yaw={yaw}, pitch={pitch}"
+                )
                 await self.camera.send_attitude_angles_command(yaw, pitch)
-                
+
             elif msg.control_mode == 2:
                 axis = SingleAxis.YAW if msg.axis_id == 0 else SingleAxis.PITCH
                 angle = msg.angle
-                self.get_logger().debug(f"Attempting single axis: axis={axis.name}, angle={angle}")
+                self.get_logger().debug(
+                    f"Attempting single axis: axis={axis.name}, angle={angle}"
+                )
                 await self.camera.send_single_axis_attitude_command(angle, axis)
 
-            elif msg.control_mode == 3: 
+            elif msg.control_mode == 3:
                 zoom_level = msg.zoom_level
-                self.get_logger().debug(f"Attempting absolute zoom: level={zoom_level}x")
+                self.get_logger().debug(
+                    f"Attempting absolute zoom: level={zoom_level}x"
+                )
                 await self.camera.send_absolute_zoom_command(zoom_level)
-                
-            if hasattr(msg, 'stream_type') and hasattr(msg, 'stream_freq'):
-                if msg.stream_type > 0 and msg.stream_freq >= 0: 
+
+            if hasattr(msg, "stream_type") and hasattr(msg, "stream_freq"):
+                if msg.stream_type > 0 and msg.stream_freq >= 0:
                     try:
                         stream_type = DataStreamType(msg.stream_type)
                         stream_freq = DataStreamFrequency(msg.stream_freq)
                         self.get_logger().info(
                             f"Attempting to set data stream: type={stream_type.name}, freq={stream_freq.name}"
                         )
-                        await self.camera.send_data_stream_request(stream_type, stream_freq)
+                        await self.camera.send_data_stream_request(
+                            stream_type, stream_freq
+                        )
                     except ValueError:
-                        self.get_logger().error("Invalid stream type or frequency values in control message")
-            
-        except RuntimeError as e: # Catch SDK's "not connected" errors
+                        self.get_logger().error(
+                            "Invalid stream type or frequency values in control message"
+                        )
+
+        except RuntimeError as e:  # Catch SDK's "not connected" errors
             self.get_logger().warning(f"SDK command failed (likely not connected): {e}")
             # self.camera_connected will be updated by health/connection checks
             # self.feedback_msg.error_msg = f"Command failed: {str(e)}" # Already set by health check
@@ -226,58 +253,64 @@ class PtzNode(Node):
         except Exception as e:
             self.get_logger().error(f"Error processing control command: {e}")
             self.feedback_msg.error_msg = f"Control error: {str(e)}"
-            self.feedback_pub.publish(self.feedback_msg) # Publish for other errors
+            self.feedback_pub.publish(self.feedback_msg)  # Publish for other errors
 
     def publish_debug(self, message_text):
         """Publish debug message."""
         msg = String()
-        msg.data = f"[{self.get_clock().now().nanoseconds / 1e9:.2f}] PTZ Node: {message_text}"
+        msg.data = (
+            f"[{self.get_clock().now().nanoseconds / 1e9:.2f}] PTZ Node: {message_text}"
+        )
         self.debug_pub.publish(msg)
-        self.get_logger().info(message_text) 
+        self.get_logger().debug(message_text)
 
     def run_async_func(self, coro):
         """Run an async function in the event loop."""
         if self.loop and self.loop.is_running():
             try:
-                return asyncio.run_coroutine_threadsafe(coro, self.loop).result(timeout=5.0) # Added timeout
+                return asyncio.run_coroutine_threadsafe(coro, self.loop).result(
+                    timeout=5.0
+                )  # Added timeout
             except asyncio.TimeoutError:
                 self.get_logger().warning(f"Async function {coro.__name__} timed out.")
                 return None
             except Exception as e:
-                self.get_logger().error(f"Exception in run_async_func for {coro.__name__}: {e}")
+                self.get_logger().error(
+                    f"Exception in run_async_func for {coro.__name__}: {e}"
+                )
                 return None
         else:
-            self.get_logger().warning("Asyncio loop not running, cannot execute coroutine.")
+            self.get_logger().warning(
+                "Asyncio loop not running, cannot execute coroutine."
+            )
             return None
 
-
     async def shutdown_node_async(self):
         """Perform clean shutdown of camera connection."""
         self.shutdown_requested = True
         self.get_logger().info("Async shutdown initiated...")
-        if self.camera and self.camera.is_connected: # Check SDK's connection state
+        if self.camera and self.camera.is_connected:  # Check SDK's connection state
             try:
                 self.get_logger().info("Disabling data stream...")
                 await self.camera.send_data_stream_request(
-                    DataStreamType.ATTITUDE_DATA, 
-                    DataStreamFrequency.DISABLE
+                    DataStreamType.ATTITUDE_DATA, DataStreamFrequency.DISABLE
                 )
-                await asyncio.sleep(0.1) 
-                
+                await asyncio.sleep(0.1)
+
                 self.get_logger().info("Disconnecting from camera...")
                 await self.camera.disconnect()
                 self.get_logger().info("Disconnected from camera successfully.")
-                
+
             except Exception as e:
                 self.get_logger().error(f"Error during camera shutdown: {e}")
-        self.camera_connected = False # Update node's flag
+        self.camera_connected = False  # Update node's flag
         self.feedback_msg.connected = False
         self.feedback_msg.error_msg = "Shutting down"
 
     def cleanup(self):
         """Clean up resources."""
         self.get_logger().info("PTZ node cleanup initiated.")
-        self.shutdown_requested = True 
+        self.shutdown_requested = True
 
         if self.connection_timer:
             self.connection_timer.cancel()
@@ -287,31 +320,38 @@ class PtzNode(Node):
         if self.loop and self.thread_pool:
             if self.loop.is_running():
                 try:
-                    future = asyncio.run_coroutine_threadsafe(self.shutdown_node_async(), self.loop)
-                    future.result(timeout=5) 
+                    future = asyncio.run_coroutine_threadsafe(
+                        self.shutdown_node_async(), self.loop
+                    )
+                    future.result(timeout=5)
                 except Exception as e:
-                    self.get_logger().error(f"Error during async shutdown in cleanup: {e}")
-            
+                    self.get_logger().error(
+                        f"Error during async shutdown in cleanup: {e}"
+                    )
+
             self.get_logger().info("Shutting down thread pool executor...")
             self.thread_pool.shutdown(wait=True)
-            
+
             if self.loop.is_running():
                 self.get_logger().info("Stopping asyncio event loop...")
                 self.loop.call_soon_threadsafe(self.loop.stop)
-            
+
             self.get_logger().info("PTZ node resources cleaned up.")
         else:
-            self.get_logger().warning("Loop or thread_pool not initialized, skipping parts of cleanup.")
+            self.get_logger().warning(
+                "Loop or thread_pool not initialized, skipping parts of cleanup."
+            )
 
 
 def main(args=None):
     """Main function."""
     rclpy.init(args=args)
-    
+
     ptz_node = PtzNode()
-    
+
     asyncio_thread = None
-    if ptz_node.loop: 
+    if ptz_node.loop:
+
         def run_event_loop(loop):
             asyncio.set_event_loop(loop)
             try:
@@ -322,14 +362,12 @@ def main(args=None):
                 # or an unhandled exception within a task scheduled on the loop.
                 if not loop.is_closed():
                     loop.close()
-        
+
         asyncio_thread = threading.Thread(
-            target=run_event_loop, 
-            args=(ptz_node.loop,),
-            daemon=True 
+            target=run_event_loop, args=(ptz_node.loop,), daemon=True
         )
         asyncio_thread.start()
-    
+
     try:
         rclpy.spin(ptz_node)
     except KeyboardInterrupt:
@@ -338,18 +376,18 @@ def main(args=None):
         ptz_node.get_logger().info("SystemExit received, shutting down...")
     finally:
         ptz_node.get_logger().info("Initiating final cleanup...")
-        ptz_node.cleanup() # This will stop the loop and shutdown the executor
-        
+        ptz_node.cleanup()  # This will stop the loop and shutdown the executor
+
         if asyncio_thread and asyncio_thread.is_alive():
-             # The loop should have been stopped by cleanup. We just join the thread.
-             ptz_node.get_logger().info("Waiting for asyncio thread to join...")
-             asyncio_thread.join(timeout=5) 
-             if asyncio_thread.is_alive():
-                 ptz_node.get_logger().warning("Asyncio thread did not join cleanly.")
-        
+            # The loop should have been stopped by cleanup. We just join the thread.
+            ptz_node.get_logger().info("Waiting for asyncio thread to join...")
+            asyncio_thread.join(timeout=5)
+            if asyncio_thread.is_alive():
+                ptz_node.get_logger().warning("Asyncio thread did not join cleanly.")
+
         rclpy.shutdown()
         ptz_node.get_logger().info("ROS shutdown complete.")
 
 
-if __name__ == '__main__':
+if __name__ == "__main__":
     main()

src/core_pkg/core_pkg/siyi_sdk/siyi.py

@@ -110,9 +110,7 @@ class SiyiGimbalCamera:
 
     MAX_A8_MINI_ZOOM = 6.0  # Maximum zoom for A8 mini
 
-    def __init__(
-        self, ip: str, port: int = 37260, *, heartbeat_interval: int = 2
-    ):
+    def __init__(self, ip: str, port: int = 37260, *, heartbeat_interval: int = 2):
         self.ip = ip
         self.port = port
         self.heartbeat_interval = heartbeat_interval
@@ -124,9 +122,7 @@ class SiyiGimbalCamera:
 
     async def connect(self) -> None:
         try:
-            self.reader, self.writer = await asyncio.open_connection(
-                self.ip, self.port
-            )
+            self.reader, self.writer = await asyncio.open_connection(self.ip, self.port)
             self.is_connected = True
             asyncio.create_task(self.heartbeat_loop())
             asyncio.create_task(self._data_stream_listener())
@@ -158,9 +154,7 @@ class SiyiGimbalCamera:
             if self.is_connected:
                 await self.disconnect()
 
-    def _build_packet_header(
-        self, cmd_id: CommandID, data_len: int
-    ) -> bytearray:
+    def _build_packet_header(self, cmd_id: CommandID, data_len: int) -> bytearray:
         """Helper to build the common packet header."""
         packet = bytearray()
         packet.extend(b"\x55\x66")  # STX
@@ -179,15 +173,11 @@ class SiyiGimbalCamera:
 
     def _build_rotation_packet(self, turn_yaw: int, turn_pitch: int) -> bytes:
         data_len = 2
-        packet = self._build_packet_header(
-            CommandID.ROTATION_CONTROL, data_len
-        )
+        packet = self._build_packet_header(CommandID.ROTATION_CONTROL, data_len)
         packet.extend(struct.pack("bb", turn_yaw, turn_pitch))
         return self._finalize_packet(packet)
 
-    async def send_rotation_command(
-        self, turn_yaw: int, turn_pitch: int
-    ) -> None:
+    async def send_rotation_command(self, turn_yaw: int, turn_pitch: int) -> None:
         if not self.is_connected or not self.writer:
             raise RuntimeError(
                 "Socket is not connected or writer is None, cannot send rotation command."
@@ -199,21 +189,15 @@ class SiyiGimbalCamera:
             f"Sent rotation command with yaw_speed {turn_yaw} and pitch_speed {turn_pitch}"
         )
 
-    def _build_attitude_angles_packet(
-        self, yaw: float, pitch: float
-    ) -> bytes:
+    def _build_attitude_angles_packet(self, yaw: float, pitch: float) -> bytes:
         data_len = 4
-        packet = self._build_packet_header(
-            CommandID.ATTITUDE_ANGLES, data_len
-        )
+        packet = self._build_packet_header(CommandID.ATTITUDE_ANGLES, data_len)
         yaw_int = int(round(yaw * 10))
         pitch_int = int(round(pitch * 10))
         packet.extend(struct.pack("<hh", yaw_int, pitch_int))
         return self._finalize_packet(packet)
 
-    async def send_attitude_angles_command(
-        self, yaw: float, pitch: float
-    ) -> None:
+    async def send_attitude_angles_command(self, yaw: float, pitch: float) -> None:
         if not self.is_connected or not self.writer:
             raise RuntimeError(
                 "Socket is not connected or writer is None, cannot send attitude angles command."
@@ -221,17 +205,13 @@ class SiyiGimbalCamera:
         packet = self._build_attitude_angles_packet(yaw, pitch)
         self.writer.write(packet)
         await self.writer.drain()
-        logger.debug(
-            f"Sent attitude angles command with yaw {yaw}° and pitch {pitch}°"
-        )
+        logger.debug(f"Sent attitude angles command with yaw {yaw}° and pitch {pitch}°")
 
     def _build_single_axis_attitude_packet(
         self, angle: float, axis: SingleAxis
     ) -> bytes:
         data_len = 3
-        packet = self._build_packet_header(
-            CommandID.SINGLE_AXIS_CONTROL, data_len
-        )
+        packet = self._build_packet_header(CommandID.SINGLE_AXIS_CONTROL, data_len)
         angle_int = int(round(angle * 10))
         packet.extend(struct.pack("<hB", angle_int, axis.value))
         return self._finalize_packet(packet)
@@ -254,9 +234,7 @@ class SiyiGimbalCamera:
         self, data_type: DataStreamType, data_freq: DataStreamFrequency
     ) -> bytes:
         data_len = 2
-        packet = self._build_packet_header(
-            CommandID.DATA_STREAM_REQUEST, data_len
-        )
+        packet = self._build_packet_header(CommandID.DATA_STREAM_REQUEST, data_len)
         packet.append(data_type.value)
         packet.append(data_freq.value)
         return self._finalize_packet(packet)
@@ -279,7 +257,9 @@ class SiyiGimbalCamera:
         data_len = 2
         packet = self._build_packet_header(CommandID.ABSOLUTE_ZOOM, data_len)
         zoom_packet_value = int(round(zoom_level * 10))
-        if not (0 <= zoom_packet_value <= 65535): # Should be caught by clamping earlier
+        if not (
+            0 <= zoom_packet_value <= 65535
+        ):  # Should be caught by clamping earlier
             raise ValueError(
                 "Zoom packet value out of uint16_t range after conversion."
             )
@@ -329,24 +309,24 @@ class SiyiGimbalCamera:
         ctrl = await self.reader.readexactly(1)
         data_len_bytes = await self.reader.readexactly(2)
         data_len = struct.unpack("<H", data_len_bytes)[0]
-        seq_bytes = await self.reader.readexactly(2) # Renamed for clarity
+        seq_bytes = await self.reader.readexactly(2)  # Renamed for clarity
         # seq_val = struct.unpack("<H", seq_bytes)[0] # If you need the sequence value
         cmd_id_bytes = await self.reader.readexactly(1)
-        cmd_id_val = cmd_id_bytes[0] # Renamed for clarity
-        
+        cmd_id_val = cmd_id_bytes[0]  # Renamed for clarity
+
         # Protect against excessively large data_len
-        if data_len > 2048: # Arbitrary reasonable limit
+        if data_len > 2048:  # Arbitrary reasonable limit
             raise ValueError(f"Excessive data length received: {data_len}")
 
         data = await self.reader.readexactly(data_len)
         crc_bytes = await self.reader.readexactly(2)
         received_crc = struct.unpack("<H", crc_bytes)[0]
-        
+
         packet_without_crc = (
             stx + ctrl + data_len_bytes + seq_bytes + cmd_id_bytes + data
         )
         computed_crc = Crc16.calc(packet_without_crc)
-        
+
         if computed_crc != received_crc:
             raise ValueError(
                 f"CRC check failed. Expected {computed_crc:04X}, got {received_crc:04X}. "
@@ -374,10 +354,7 @@ class SiyiGimbalCamera:
                         self._data_callback(cmd_id_int, data)
                     continue
 
-                if (
-                    cmd_id_enum == CommandID.ATTITUDE_DATA_RESPONSE
-                    and len(data) == 12
-                ):
+                if cmd_id_enum == CommandID.ATTITUDE_DATA_RESPONSE and len(data) == 12:
                     try:
                         parsed = AttitudeData.from_bytes(data)
                         if self._data_callback:
@@ -385,9 +362,7 @@ class SiyiGimbalCamera:
                         else:
                             logger.info(f"Received attitude data: {parsed}")
                     except Exception as e:
-                        logger.exception(
-                            f"Failed to parse attitude data: {e}"
-                        )
+                        logger.exception(f"Failed to parse attitude data: {e}")
                         if self._data_callback:
                             self._data_callback(cmd_id_enum, data)
                 else:
@@ -410,12 +385,12 @@ class SiyiGimbalCamera:
             except ValueError as e:
                 logger.error(f"Packet error in listener: {e}")
                 # Consider adding a small delay or a mechanism to resync if this happens frequently
-                await asyncio.sleep(0.1) # Small delay before trying to read again
+                await asyncio.sleep(0.1)  # Small delay before trying to read again
                 continue
             except Exception as e:
                 logger.exception(f"Unexpected error in data stream listener: {e}")
                 # Depending on the error, you might want to break or continue
-                await asyncio.sleep(0.1) # Small delay
+                await asyncio.sleep(0.1)  # Small delay
                 continue
 
     def set_data_callback(
@@ -424,12 +399,14 @@ class SiyiGimbalCamera:
         self._data_callback = callback
 
 
-async def main_sdk_test(): # Renamed to avoid conflict if this file is imported
+async def main_sdk_test():  # Renamed to avoid conflict if this file is imported
     gimbal_ip = "192.168.144.25"
     gimbal = SiyiGimbalCamera(gimbal_ip)
 
     def my_data_handler(cmd_id, data):
-        if cmd_id == CommandID.ATTITUDE_DATA_RESPONSE and isinstance(data, AttitudeData):
+        if cmd_id == CommandID.ATTITUDE_DATA_RESPONSE and isinstance(
+            data, AttitudeData
+        ):
             print(
                 f"Attitude: Yaw={data.yaw:.1f}, Pitch={data.pitch:.1f}, Roll={data.roll:.1f}"
             )
@@ -460,7 +437,7 @@ async def main_sdk_test(): # Renamed to avoid conflict if this file is imported
             print("SDK Test: Setting zoom to 6.0x (A8 mini max)")
             await gimbal.send_absolute_zoom_command(6.0)
             await asyncio.sleep(2)
-            
+
             print("SDK Test: Attempting zoom to 7.0x (should be clamped to 6.0x)")
             await gimbal.send_absolute_zoom_command(7.0)
             await asyncio.sleep(2)
@@ -470,16 +447,19 @@ async def main_sdk_test(): # Renamed to avoid conflict if this file is imported
             await asyncio.sleep(2)
 
             print("SDK Test: Requesting attitude data stream at 5Hz...")
-            await gimbal.send_data_stream_request(DataStreamType.ATTITUDE_DATA, DataStreamFrequency.HZ_5)
-            
+            await gimbal.send_data_stream_request(
+                DataStreamType.ATTITUDE_DATA, DataStreamFrequency.HZ_5
+            )
+
             print("SDK Test: Listening for data for 10 seconds...")
             await asyncio.sleep(10)
 
             print("SDK Test: Disabling attitude data stream...")
-            await gimbal.send_data_stream_request(DataStreamType.ATTITUDE_DATA, DataStreamFrequency.DISABLE)
+            await gimbal.send_data_stream_request(
+                DataStreamType.ATTITUDE_DATA, DataStreamFrequency.DISABLE
+            )
             await asyncio.sleep(1)
 
-
     except ConnectionRefusedError:
         print(
             f"SDK Test: Connection to {gimbal_ip} was refused. Is the gimbal on and accessible?"

src/core_pkg/core_pkg/siyi_sdk/test.py

@@ -24,7 +24,9 @@ async def main():
         await asyncio.sleep(2)
 
         # Command 1: Move all the way to the right (using set angles)
-        logger.info("Command 1: Move all the way to the right (using absolute angle control)")
+        logger.info(
+            "Command 1: Move all the way to the right (using absolute angle control)"
+        )
         await camera.send_attitude_angles_command(135.0, 0.0)
         await asyncio.sleep(5)
 
@@ -35,13 +37,17 @@ async def main():
         await asyncio.sleep(5)
 
         # Command 3: Stop looking down, then look up (with the single axis)
-        logger.info("Command 3: Stop looking down and start looking up (single axis control)")
+        logger.info(
+            "Command 3: Stop looking down and start looking up (single axis control)"
+        )
         await camera.send_rotation_command(0, 0)
         await camera.send_single_axis_attitude_command(135, SingleAxis.PITCH)
         await asyncio.sleep(5)
 
         # Command 4: Reset and move all the way to the left (Absolute value).
-        logger.info("Command 4: Move back to the center, and start moving all the way left")
+        logger.info(
+            "Command 4: Move back to the center, and start moving all the way left"
+        )
         await camera.send_attitude_angles_command(-135.0, 0.0)
         await asyncio.sleep(5)
 

src/core_pkg/package.xml

@@ -11,7 +11,7 @@
   <depend>common_interfaces</depend>
   <depend>python3-scipy</depend>
   <depend>python-crccheck-pip</depend>
-  <depend>ros2_interfaces_pkg</depend>
+  <depend>astra_msgs</depend>
 
   <test_depend>ament_copyright</test_depend>
   <test_depend>ament_flake8</test_depend>

src/core_pkg/setup.py

@@ -1,27 +1,26 @@
 from setuptools import find_packages, setup
 
-package_name = 'core_pkg'
+package_name = "core_pkg"
 
 setup(
     name=package_name,
-    version='0.0.0',
-    packages=find_packages(exclude=['test']),
+    version="0.0.0",
+    packages=find_packages(exclude=["test"]),
     data_files=[
-        ('share/ament_index/resource_index/packages',
-            ['resource/' + package_name]),
-        ('share/' + package_name, ['package.xml']),
+        ("share/ament_index/resource_index/packages", ["resource/" + package_name]),
+        ("share/" + package_name, ["package.xml"]),
     ],
-    install_requires=['setuptools'],
+    install_requires=["setuptools"],
     zip_safe=True,
-    maintainer='tristan',
-    maintainer_email='tristanmcginnis26@gmail.com',
-    description='Core rover control package to handle command interpretation and embedded interfacing.',
-    license='All Rights Reserved',
+    maintainer="tristan",
+    maintainer_email="tristanmcginnis26@gmail.com",
+    description="Core rover control package to handle command interpretation and embedded interfacing.",
+    license="All Rights Reserved",
     entry_points={
-        'console_scripts': [
+        "console_scripts": [
             "core = core_pkg.core_node:main",
             "headless = core_pkg.core_headless:main",
-            "ptz = core_pkg.core_ptz:main"
+            "ptz = core_pkg.core_ptz:main",
         ],
     },
 )

src/headless_pkg/package.xml

@@ -10,7 +10,7 @@
   <depend>rclpy</depend>
   <depend>common_interfaces</depend>
   <depend>python3-pygame</depend>
-  <depend>ros2_interfaces_pkg</depend>
+  <depend>astra_msgs</depend>
 
   <test_depend>ament_copyright</test_depend>
   <test_depend>ament_flake8</test_depend>

src/headless_pkg/setup.py

@@ -1,23 +1,23 @@
 from setuptools import find_packages, setup
 
-package_name = 'headless_pkg'
+package_name = "headless_pkg"
 
 setup(
     name=package_name,
-    version='1.0.0',
-    packages=find_packages(exclude=['test']),
+    version="1.0.0",
+    packages=find_packages(exclude=["test"]),
     data_files=[
-        ('share/ament_index/resource_index/packages', ['resource/' + package_name]),
-        ('share/' + package_name, ['package.xml']),
+        ("share/ament_index/resource_index/packages", ["resource/" + package_name]),
+        ("share/" + package_name, ["package.xml"]),
     ],
-    install_requires=['setuptools'],
+    install_requires=["setuptools"],
     zip_safe=True,
-    maintainer='David Sharpe',
-    maintainer_email='ds0196@uah.edu',
-    description='Headless rover control package to handle command interpretation and embedded interfacing.',
-    license='All Rights Reserved',
+    maintainer="David Sharpe",
+    maintainer_email="ds0196@uah.edu",
+    description="Headless rover control package to handle command interpretation and embedded interfacing.",
+    license="All Rights Reserved",
     entry_points={
-        'console_scripts': [
+        "console_scripts": [
             "headless_full = src.headless_node:main",
         ],
     },

src/headless_pkg/src/headless_node.py

@@ -1,61 +1,91 @@
 import rclpy
 from rclpy.node import Node
+from rclpy.executors import ExternalShutdownException
 from rclpy import qos
 from rclpy.duration import Duration
 
 import signal
 import time
-import atexit
 
 import os
 import sys
-import threading
-import glob
+import pwd
+import grp
 from math import copysign
 
-from std_msgs.msg import String
-from geometry_msgs.msg import Twist
-from ros2_interfaces_pkg.msg import CoreControl, ArmManual, BioControl
-from ros2_interfaces_pkg.msg import CoreCtrlState
+from std_srvs.srv import Trigger
+from std_msgs.msg import Header
+from geometry_msgs.msg import Twist, TwistStamped
+from control_msgs.msg import JointJog
+from astra_msgs.msg import CoreControl, ArmManual, BioControl
+from astra_msgs.msg import CoreCtrlState
+
+import warnings
+
+# Literally headless
+warnings.filterwarnings(
+    "ignore",
+    message="Your system is avx2 capable but pygame was not built with support for it.",
+)
 
 import pygame
 
 os.environ["SDL_VIDEODRIVER"] = "dummy"  # Prevents pygame from trying to open a display
-os.environ["SDL_AUDIODRIVER"] = "dummy"  # Force pygame to use a dummy audio driver before pygame.init()
+os.environ["SDL_AUDIODRIVER"] = (
+    "dummy"  # Force pygame to use a dummy audio driver before pygame.init()
+)
 
 
 CORE_STOP_MSG = CoreControl()  # All zeros by default
 CORE_STOP_TWIST_MSG = Twist()  # "
-ARM_STOP_MSG = ArmManual()     # "
-BIO_STOP_MSG = BioControl()    # "
+ARM_STOP_MSG = ArmManual()  # "
+BIO_STOP_MSG = BioControl()  # "
+
 
 control_qos = qos.QoSProfile(
     history=qos.QoSHistoryPolicy.KEEP_LAST,
     depth=2,
     reliability=qos.QoSReliabilityPolicy.BEST_EFFORT,
     durability=qos.QoSDurabilityPolicy.VOLATILE,
-    deadline=Duration(seconds=1),
-    lifespan=Duration(nanoseconds=500_000_000),  # 500ms
-    liveliness=qos.QoSLivelinessPolicy.SYSTEM_DEFAULT,
-    liveliness_lease_duration=Duration(seconds=5)
+    # deadline=Duration(seconds=1),
+    # lifespan=Duration(nanoseconds=500_000_000),  # 500ms
+    # liveliness=qos.QoSLivelinessPolicy.SYSTEM_DEFAULT,
+    # liveliness_lease_duration=Duration(seconds=5),
 )
 
-CORE_MODE = "twist"  # "twist" or "duty"
+
+STICK_DEADZONE = float(os.getenv("STICK_DEADZONE", "0.05"))
+ARM_DEADZONE = float(os.getenv("ARM_DEADZONE", "0.2"))
 
 
 class Headless(Node):
+    # Every non-fixed joint defined in Arm's URDF
+    # Used for JointState and JointJog messsages
+    all_joint_names = [
+        "axis_0_joint",
+        "axis_1_joint",
+        "axis_2_joint",
+        "axis_3_joint",
+        "wrist_yaw_joint",
+        "wrist_roll_joint",
+        "ef_gripper_left_joint",
+    ]
+
     def __init__(self):
         # Initialize pygame first
         pygame.init()
         pygame.joystick.init()
-        super().__init__("headless")
+        super().__init__("headless_node")
+
+        ##################################################
+        # Preamble
 
         # Wait for anchor to start
-        pub_info = self.get_publishers_info_by_topic('/anchor/from_vic/debug')
+        pub_info = self.get_publishers_info_by_topic("/anchor/from_vic/debug")
         while len(pub_info) == 0:
             self.get_logger().info("Waiting for anchor to start...")
             time.sleep(1.0)
-            pub_info = self.get_publishers_info_by_topic('/anchor/from_vic/debug')
+            pub_info = self.get_publishers_info_by_topic("/anchor/from_vic/debug")
 
         # Wait for a gamepad to be connected
         print("Waiting for gamepad connection...")
@@ -69,60 +99,168 @@ class Headless(Node):
             print("No gamepad found. Waiting...")
 
         # Initialize the gamepad
-        self.gamepad = pygame.joystick.Joystick(0)
-        self.gamepad.init()
-        print(f'Gamepad Found: {self.gamepad.get_name()}')
+        id = 0
+        while True:
+            self.num_gamepads = pygame.joystick.get_count()
+            if id >= self.num_gamepads:
+                self.get_logger().fatal("Ran out of controllers to try")
+                sys.exit(1)
 
-        self.create_timer(0.15, self.send_controls)
+            try:
+                self.gamepad = pygame.joystick.Joystick(id)
+                self.gamepad.init()
+            except Exception as e:
+                self.get_logger().error("Error when initializing gamepad")
+                self.get_logger().error(e)
+                id += 1
+                continue
+            print(f"Gamepad Found: {self.gamepad.get_name()}")
 
-        self.core_publisher = self.create_publisher(CoreControl, '/core/control', 2)
-        self.arm_publisher = self.create_publisher(ArmManual, '/arm/control/manual', 2)
-        self.bio_publisher = self.create_publisher(BioControl, '/bio/control', 2)
+            if self.gamepad.get_numhats() == 0 or self.gamepad.get_numaxes() < 5:
+                self.get_logger().error("Controller not correctly initialized.")
+                if not is_user_in_group("input"):
+                    self.get_logger().warning(
+                        "If using NixOS, you may need to add yourself to the 'input' group."
+                    )
+                if is_user_in_group("plugdev"):
+                    self.get_logger().warning(
+                        "If using NixOS, you may need to remove yourself from the 'plugdev' group."
+                    )
+            else:
+                break
+            id += 1
 
-        self.core_twist_pub_ = self.create_publisher(Twist, '/core/twist', qos_profile=control_qos)
-        self.core_state_pub_ = self.create_publisher(CoreCtrlState, '/core/control/state', qos_profile=control_qos)
+        ##################################################
+        # Parameters
 
+        self.declare_parameter("use_old_topics", True)
+        self.use_old_topics = (
+            self.get_parameter("use_old_topics").get_parameter_value().bool_value
+        )
+
+        self.declare_parameter("use_bio", False)
+        self.use_bio = self.get_parameter("use_bio").get_parameter_value().bool_value
+
+        self.declare_parameter("use_arm_ik", False)
+        self.use_arm_ik = (
+            self.get_parameter("use_arm_ik").get_parameter_value().bool_value
+        )
+
+        # NOTE: only applicable if use_old_topics == True
+        self.declare_parameter("use_new_arm_manual_scheme", True)
+        self.use_new_arm_manual_scheme = (
+            self.get_parameter("use_new_arm_manual_scheme")
+            .get_parameter_value()
+            .bool_value
+        )
+
+        # Check parameter validity
+        if self.use_arm_ik and self.use_old_topics:
+            self.get_logger().fatal("Old topics do not support arm IK control.")
+            sys.exit(1)
+        if not self.use_new_arm_manual_scheme and not self.use_old_topics:
+            self.get_logger().warn(
+                f"New arm manual does not support old control scheme. Defaulting to new scheme."
+            )
 
         self.ctrl_mode = "core"  # Start in core mode
         self.core_brake_mode = False
         self.core_max_duty = 0.5  # Default max duty cycle (walking speed)
 
+        ##################################################
+        # Old Topics
+
+        if self.use_old_topics:
+            self.core_publisher = self.create_publisher(CoreControl, "/core/control", 2)
+            self.arm_publisher = self.create_publisher(
+                ArmManual, "/arm/control/manual", 2
+            )
+            self.bio_publisher = self.create_publisher(BioControl, "/bio/control", 2)
+
+        ##################################################
+        # New Topics
+
+        if not self.use_old_topics:
+            self.core_twist_pub_ = self.create_publisher(
+                Twist, "/core/twist", qos_profile=control_qos
+            )
+            self.core_state_pub_ = self.create_publisher(
+                CoreCtrlState, "/core/control/state", qos_profile=control_qos
+            )
+
+            self.arm_manual_pub_ = self.create_publisher(
+                JointJog, "/arm/manual_new", qos_profile=control_qos
+            )
+
+            self.arm_ik_twist_publisher = self.create_publisher(
+                TwistStamped, "/servo_node/delta_twist_cmds", qos_profile=control_qos
+            )
+            self.arm_ik_jointjog_publisher = self.create_publisher(
+                JointJog, "/servo_node/delta_joint_cmds", qos_profile=control_qos
+            )
+
+            # TODO: add new bio topics
+
+        ##################################################
+        # Timers
+
+        self.create_timer(0.1, self.send_controls)
+
+        ##################################################
+        # Services
+
+        # If using IK control, we have to "start" the servo node to enable it to accept commands
+        self.servo_start_client = None
+        if self.use_arm_ik:
+            self.get_logger().info("Starting servo node for IK control...")
+            self.servo_start_client = self.create_client(
+                Trigger, "/servo_node/start_servo"
+            )
+            timeout_counter = 0
+            while not self.servo_start_client.wait_for_service(timeout_sec=1.0):
+                self.get_logger().info("Waiting for servo_node/start_servo service...")
+                timeout_counter += 1
+                if timeout_counter >= 10:
+                    self.get_logger().error(
+                        "Servo's start service not available. IK control will not work."
+                    )
+                    break
+            if self.servo_start_client.service_is_ready():
+                self.servo_start_client.call_async(Trigger.Request())
+
         # Rumble when node is ready (returns False if rumble not supported)
         self.gamepad.rumble(0.7, 0.8, 150)
 
-
-    def run(self):
-        # This thread makes all the update processes run in the background
-        thread = threading.Thread(target=rclpy.spin, args={self}, daemon=True)
-        thread.start()
-        
-        try:
-            while rclpy.ok():
-                self.send_controls()
-                time.sleep(0.1)  # Small delay to avoid CPU hogging
-        except KeyboardInterrupt:
-            sys.exit(0)
+    def stop_all(self):
+        if self.use_old_topics:
+            self.core_publisher.publish(CORE_STOP_MSG)
+            self.arm_publisher.publish(ARM_STOP_MSG)
+            self.bio_publisher.publish(BIO_STOP_MSG)
+        else:
+            self.core_twist_pub_.publish(CORE_STOP_TWIST_MSG)
+            if self.use_arm_ik:
+                self.arm_ik_twist_publisher.publish(self.arm_ik_twist_stop_msg())
+            else:
+                self.arm_manual_pub_.publish(self.arm_manual_stop_msg())
+            # TODO: add bio here after implementing new topics
 
     def send_controls(self):
-        """ Read the gamepad state and publish control messages """
+        """Read the gamepad state and publish control messages"""
         for event in pygame.event.get():
             if event.type == pygame.QUIT:
                 pygame.quit()
                 sys.exit(0)
-        
+
         # Check if controller is still connected
-        if pygame.joystick.get_count() == 0:
+        if pygame.joystick.get_count() != self.num_gamepads:
             print("Gamepad disconnected. Exiting...")
-            # Send one last zero control message
-            self.core_publisher.publish(CORE_STOP_MSG)
-            self.arm_publisher.publish(ARM_STOP_MSG)
-            self.bio_publisher.publish(BIO_STOP_MSG)
+            # Stop the rover if controller disconnected
+            self.stop_all()
             self.get_logger().info("Final stop commands sent. Shutting down.")
             # Clean up
             pygame.quit()
             sys.exit(0)
 
-
         new_ctrl_mode = self.ctrl_mode  # if "" then inequality will always be true
 
         # Check for control mode change
@@ -133,22 +271,51 @@ class Headless(Node):
             new_ctrl_mode = "core"
 
         if new_ctrl_mode != self.ctrl_mode:
+            self.stop_all()
             self.gamepad.rumble(0.6, 0.7, 75)
             self.ctrl_mode = new_ctrl_mode
             self.get_logger().info(f"Switched to {self.ctrl_mode} control mode")
+            if self.ctrl_mode == "arm" and self.use_bio:
+                self.get_logger().warning("NOTE: Using bio instead of arm.")
 
+        # Actually send the controls
+        if self.ctrl_mode == "core":
+            self.send_core()
+            if self.use_old_topics:
+                if self.use_bio:
+                    self.bio_publisher.publish(BIO_STOP_MSG)
+                else:
+                    self.arm_publisher.publish(ARM_STOP_MSG)
+            # New topics shouldn't need to constantly send zeroes imo
+        else:
+            if self.use_bio:
+                self.send_bio()
+            else:
+                self.send_arm()
+            if self.use_old_topics:
+                self.core_publisher.publish(CORE_STOP_MSG)
+            # Ditto
 
-        # CORE
-        if self.ctrl_mode == "core" and CORE_MODE == "duty":
+    def send_core(self):
+        # Collect controller state
+        left_stick_x = stick_deadzone(self.gamepad.get_axis(0))
+        left_stick_y = stick_deadzone(self.gamepad.get_axis(1))
+        left_trigger = stick_deadzone(self.gamepad.get_axis(2))
+        right_stick_x = stick_deadzone(self.gamepad.get_axis(3))
+        right_stick_y = stick_deadzone(self.gamepad.get_axis(4))
+        right_trigger = stick_deadzone(self.gamepad.get_axis(5))
+        button_a = self.gamepad.get_button(0)
+        button_b = self.gamepad.get_button(1)
+        button_x = self.gamepad.get_button(2)
+        button_y = self.gamepad.get_button(3)
+        left_bumper = self.gamepad.get_button(4)
+        right_bumper = self.gamepad.get_button(5)
+        dpad_input = self.gamepad.get_hat(0)
+
+        if self.use_old_topics:
             input = CoreControl()
             input.max_speed = 90
 
-            # Collect controller state
-            left_stick_y = deadzone(self.gamepad.get_axis(1))
-            right_stick_y = deadzone(self.gamepad.get_axis(4))
-            right_trigger = deadzone(self.gamepad.get_axis(5))
-
-
             # Right wheels
             input.right_stick = float(round(-1 * right_stick_y, 2))
 
@@ -158,34 +325,26 @@ class Headless(Node):
             else:
                 input.left_stick = float(round(-1 * left_stick_y, 2))
 
-
             # Debug
-            output = f'L: {input.left_stick}, R: {input.right_stick}'
+            output = f"L: {input.left_stick}, R: {input.right_stick}"
             self.get_logger().info(f"[Ctrl] {output}")
 
             self.core_publisher.publish(input)
-            self.arm_publisher.publish(ARM_STOP_MSG)
-            # self.bio_publisher.publish(BIO_STOP_MSG)
-        
-        elif self.ctrl_mode == "core" and CORE_MODE == "twist":
-            input = Twist()
 
-            # Collect controller state
-            left_stick_y = deadzone(self.gamepad.get_axis(1))
-            right_stick_x = deadzone(self.gamepad.get_axis(3))
-            button_a = self.gamepad.get_button(0)
-            left_bumper = self.gamepad.get_button(4)
-            right_bumper = self.gamepad.get_button(5)
+        else:  # New topics
+            input = Twist()
 
             # Forward/back and Turn
             input.linear.x = -1.0 * left_stick_y
-            input.angular.z = -1.0 * copysign(right_stick_x ** 2, right_stick_x)  # Exponent for finer control (curve)
+            input.angular.z = -1.0 * copysign(
+                right_stick_x**2, right_stick_x
+            )  # Exponent for finer control (curve)
 
             # Publish
             self.core_twist_pub_.publish(input)
-            self.arm_publisher.publish(ARM_STOP_MSG)
-            # self.bio_publisher.publish(BIO_STOP_MSG)
-            self.get_logger().info(f"[Core Ctrl] Linear: {round(input.linear.x, 2)}, Angular: {round(input.angular.z, 2)}")
+            self.get_logger().info(
+                f"[Core Ctrl] Linear: {round(input.linear.x, 2)}, Angular: {round(input.angular.z, 2)}"
+            )
 
             # Brake mode
             new_brake_mode = button_a
@@ -198,103 +357,357 @@ class Headless(Node):
                 new_max_duty = 0.5
 
             # Only publish if needed
-            if new_brake_mode != self.core_brake_mode or new_max_duty != self.core_max_duty:
+            if (
+                new_brake_mode != self.core_brake_mode
+                or new_max_duty != self.core_max_duty
+            ):
                 self.core_brake_mode = new_brake_mode
                 self.core_max_duty = new_max_duty
                 state_msg = CoreCtrlState()
                 state_msg.brake_mode = bool(self.core_brake_mode)
                 state_msg.max_duty = float(self.core_max_duty)
+
                 self.core_state_pub_.publish(state_msg)
-                self.get_logger().info(f"[Core State] Brake: {self.core_brake_mode}, Max Duty: {self.core_max_duty}")
+                self.get_logger().info(
+                    f"[Core State] Brake: {self.core_brake_mode}, Max Duty: {self.core_max_duty}"
+                )
 
+    def send_arm(self):
+        # Collect controller state
+        left_stick_x = stick_deadzone(self.gamepad.get_axis(0))
+        left_stick_y = stick_deadzone(self.gamepad.get_axis(1))
+        left_trigger = stick_deadzone(self.gamepad.get_axis(2))
+        right_stick_x = stick_deadzone(self.gamepad.get_axis(3))
+        right_stick_y = stick_deadzone(self.gamepad.get_axis(4))
+        right_trigger = stick_deadzone(self.gamepad.get_axis(5))
+        button_a = self.gamepad.get_button(0)
+        button_b = self.gamepad.get_button(1)
+        button_x = self.gamepad.get_button(2)
+        button_y = self.gamepad.get_button(3)
+        left_bumper = self.gamepad.get_button(4)
+        right_bumper = self.gamepad.get_button(5)
+        dpad_input = self.gamepad.get_hat(0)
 
-        # ARM and BIO
-        if self.ctrl_mode == "arm":
+        # OLD MANUAL
+        # ==========
+
+        if not self.use_arm_ik and self.use_old_topics:
             arm_input = ArmManual()
-            
-            # Collect controller state
-            left_stick_x = deadzone(self.gamepad.get_axis(0))
-            left_stick_y = deadzone(self.gamepad.get_axis(1))
-            left_trigger = deadzone(self.gamepad.get_axis(2))
-            right_stick_x = deadzone(self.gamepad.get_axis(3))
-            right_stick_y = deadzone(self.gamepad.get_axis(4))
-            right_trigger = deadzone(self.gamepad.get_axis(5))
-            right_bumper = self.gamepad.get_button(5)
-            dpad_input = self.gamepad.get_hat(0)
 
+            # OLD ARM MANUAL CONTROL SCHEME
+            if not self.use_new_arm_manual_scheme:
+                # EF Grippers
+                if left_trigger > 0 and right_trigger > 0:
+                    arm_input.gripper = 0
+                elif left_trigger > 0:
+                    arm_input.gripper = -1
+                elif right_trigger > 0:
+                    arm_input.gripper = 1
 
-            # EF Grippers
-            if left_trigger > 0 and right_trigger > 0:
-                arm_input.gripper = 0
-            elif left_trigger > 0:
-                arm_input.gripper = -1
-            elif right_trigger > 0:
-                arm_input.gripper = 1
+                # Axis 0
+                if dpad_input[0] == 1:
+                    arm_input.axis0 = 1
+                elif dpad_input[0] == -1:
+                    arm_input.axis0 = -1
 
-            # Axis 0
-            if dpad_input[0] == 1:
-                arm_input.axis0 = 1
-            elif dpad_input[0] == -1:
-                arm_input.axis0 = -1
+                if right_bumper:  # Control end effector
 
+                    # Effector yaw
+                    if left_stick_x > 0:
+                        arm_input.effector_yaw = 1
+                    elif left_stick_x < 0:
+                        arm_input.effector_yaw = -1
 
-            if right_bumper:  # Control end effector
+                    # Effector roll
+                    if right_stick_x > 0:
+                        arm_input.effector_roll = 1
+                    elif right_stick_x < 0:
+                        arm_input.effector_roll = -1
 
-                # Effector yaw
-                if left_stick_x > 0:
-                    arm_input.effector_yaw = 1
-                elif left_stick_x < 0:
-                    arm_input.effector_yaw = -1
+                else:  # Control arm axis
 
-                # Effector roll
-                if right_stick_x > 0:
-                    arm_input.effector_roll = 1
-                elif right_stick_x < 0:
+                    # Axis 1
+                    if abs(left_stick_x) > 0.15:
+                        arm_input.axis1 = round(left_stick_x)
+
+                    # Axis 2
+                    if abs(left_stick_y) > 0.15:
+                        arm_input.axis2 = -1 * round(left_stick_y)
+
+                    # Axis 3
+                    if abs(right_stick_y) > 0.15:
+                        arm_input.axis3 = -1 * round(right_stick_y)
+
+            # NEW ARM MANUAL CONTROL SCHEME
+            if self.use_new_arm_manual_scheme:
+                # Right stick: EF yaw and axis 3
+                # Left stick: axis 1 and 2
+                # D-pad: axis 0 and _
+                # Triggers: EF grippers
+                # Bumpers: EF roll
+                # A: brake
+                # B: linear actuator in
+                # X: _
+                # Y: linear actuator out
+
+                # Right stick: EF yaw and axis 3
+                arm_input.effector_yaw = stick_to_arm_direction(right_stick_x)
+                arm_input.axis3 = -1 * stick_to_arm_direction(right_stick_y)
+
+                # Left stick: axis 1 and 2
+                arm_input.axis1 = stick_to_arm_direction(left_stick_x)
+                arm_input.axis2 = -1 * stick_to_arm_direction(left_stick_y)
+
+                # D-pad: axis 0 and _
+                arm_input.axis0 = int(dpad_input[0])
+
+                # Triggers: EF Grippers
+                if left_trigger > 0 and right_trigger > 0:
+                    arm_input.gripper = 0
+                elif left_trigger > 0:
+                    arm_input.gripper = -1
+                elif right_trigger > 0:
+                    arm_input.gripper = 1
+
+                # Bumpers: EF roll
+                if left_bumper > 0 and right_bumper > 0:
+                    arm_input.effector_roll = 0
+                elif left_bumper > 0:
                     arm_input.effector_roll = -1
+                elif right_bumper > 0:
+                    arm_input.effector_roll = 1
 
-            else:   # Control arm axis
+                # A: brake
+                if button_a:
+                    arm_input.brake = True
 
-                # Axis 1
-                if abs(left_stick_x) > .15:
-                    arm_input.axis1 = round(left_stick_x)
+                # Y: linear actuator
+                if button_y and not button_b:
+                    arm_input.linear_actuator = 1
+                elif button_b and not button_y:
+                    arm_input.linear_actuator = -1
+                else:
+                    arm_input.linear_actuator = 0
 
-                # Axis 2
-                if abs(left_stick_y) > .15:
-                    arm_input.axis2 = -1 * round(left_stick_y)
+            self.arm_publisher.publish(arm_input)
 
-                # Axis 3
-                if abs(right_stick_y) > .15:
-                    arm_input.axis3 = -1 * round(right_stick_y)
+        # NEW MANUAL
+        # ==========
 
+        elif not self.use_arm_ik and not self.use_old_topics:
+            arm_input = JointJog()
+            arm_input.header.frame_id = "base_link"
+            arm_input.header.stamp = self.get_clock().now().to_msg()
+            arm_input.joint_names = self.all_joint_names
+            arm_input.velocities = [0.0] * len(self.all_joint_names)
 
-            # BIO
+            # Right stick: EF yaw and axis 3
+            # Left stick: axis 1 and 2
+            # D-pad: axis 0 and _
+            # Triggers: EF grippers
+            # Bumpers: EF roll
+            # A: brake
+            # B: linear actuator in
+            # X: _
+            # Y: linear actuator out
+
+            # Right stick: EF yaw and axis 3
+            arm_input.velocities[self.all_joint_names.index("wrist_yaw_joint")] = float(
+                stick_to_arm_direction(right_stick_x)
+            )
+            arm_input.velocities[self.all_joint_names.index("axis_3_joint")] = float(
+                stick_to_arm_direction(right_stick_y)
+            )
+
+            # Left stick: axis 1 and 2
+            arm_input.velocities[self.all_joint_names.index("axis_1_joint")] = float(
+                stick_to_arm_direction(left_stick_x)
+            )
+            arm_input.velocities[self.all_joint_names.index("axis_2_joint")] = float(
+                stick_to_arm_direction(left_stick_y)
+            )
+
+            # D-pad: axis 0 and _
+            arm_input.velocities[self.all_joint_names.index("axis_0_joint")] = float(
+                dpad_input[0]
+            )
+
+            # Triggers: EF Grippers
+            if left_trigger > 0 and right_trigger > 0:
+                arm_input.velocities[
+                    self.all_joint_names.index("ef_gripper_left_joint")
+                ] = 0.0
+            elif left_trigger > 0:
+                arm_input.velocities[
+                    self.all_joint_names.index("ef_gripper_left_joint")
+                ] = -1.0
+            elif right_trigger > 0:
+                arm_input.velocities[
+                    self.all_joint_names.index("ef_gripper_left_joint")
+                ] = 1.0
+
+            # Bumpers: EF roll
+            arm_input.velocities[self.all_joint_names.index("wrist_roll_joint")] = (
+                right_bumper - left_bumper
+            )
+
+            # A: brake
+            # TODO: Brake mode
+
+            # Y: linear actuator
+            # TODO: linear actuator
+
+            self.arm_manual_pub_.publish(arm_input)
+
+        # IK (ONLY NEW)
+        # =============
+
+        elif self.use_arm_ik:
+            arm_twist = TwistStamped()
+            arm_twist.header.frame_id = "base_link"
+            arm_twist.header.stamp = self.get_clock().now().to_msg()
+            arm_jointjog = JointJog()
+            arm_jointjog.header.frame_id = "base_link"
+            arm_jointjog.header.stamp = self.get_clock().now().to_msg()
+
+            # Right stick: linear y and linear x
+            # Left stick: angular z and linear z
+            # D-pad: angular y and _
+            # Triggers: EF grippers
+            # Bumpers: angular x
+            # A: brake
+            # B: IK mode
+            # X: manual mode
+            # Y: linear actuator
+
+            # Right stick: linear y and linear x
+            arm_twist.twist.linear.y = float(right_stick_x)
+            arm_twist.twist.linear.x = float(right_stick_y)
+
+            # Left stick: angular z and linear z
+            arm_twist.twist.angular.z = float(-1 * left_stick_x)
+            arm_twist.twist.linear.z = float(-1 * left_stick_y)
+            # D-pad: angular y and _
+            arm_twist.twist.angular.y = (
+                float(0)
+                if dpad_input[0] == 0
+                else float(-1 * copysign(0.75, dpad_input[0]))
+            )
+
+            # Triggers: EF Grippers
+            if left_trigger > 0 or right_trigger > 0:
+                arm_jointjog.joint_names.append("ef_gripper_left_joint")  # type: ignore
+                arm_jointjog.velocities.append(float(right_trigger - left_trigger))
+
+            # Bumpers: angular x
+            if left_bumper > 0 and right_bumper > 0:
+                arm_twist.twist.angular.x = float(0)
+            elif left_bumper > 0:
+                arm_twist.twist.angular.x = float(1)
+            elif right_bumper > 0:
+                arm_twist.twist.angular.x = float(-1)
+
+            self.arm_ik_twist_publisher.publish(arm_twist)
+            # self.arm_ik_jointjog_publisher.publish(arm_jointjog)  # TODO: Figure this shit out
+
+    def send_bio(self):
+        # Collect controller state
+        left_stick_x = stick_deadzone(self.gamepad.get_axis(0))
+        left_stick_y = stick_deadzone(self.gamepad.get_axis(1))
+        left_trigger = stick_deadzone(self.gamepad.get_axis(2))
+        right_stick_x = stick_deadzone(self.gamepad.get_axis(3))
+        right_stick_y = stick_deadzone(self.gamepad.get_axis(4))
+        right_trigger = stick_deadzone(self.gamepad.get_axis(5))
+        button_a = self.gamepad.get_button(0)
+        button_b = self.gamepad.get_button(1)
+        button_x = self.gamepad.get_button(2)
+        button_y = self.gamepad.get_button(3)
+        left_bumper = self.gamepad.get_button(4)
+        right_bumper = self.gamepad.get_button(5)
+        dpad_input = self.gamepad.get_hat(0)
+
+        if self.use_old_topics:
             bio_input = BioControl(
                 bio_arm=int(left_stick_y * -100),
-                drill_arm=int(round(right_stick_y) * -100)
+                drill_arm=int(round(right_stick_y) * -100),
             )
 
             # Drill motor (FAERIE)
-            if deadzone(left_trigger) > 0 or deadzone(right_trigger) > 0:
-                bio_input.drill = 100 * right_trigger - 100 * left_trigger
+            if left_trigger > 0 or right_trigger > 0:
+                bio_input.drill = int(
+                    30 * (right_trigger - left_trigger)
+                )  # Max duty cycle 30%
 
-            self.core_publisher.publish(CORE_STOP_MSG)
-            self.arm_publisher.publish(arm_input)
-            # self.bio_publisher.publish(bio_input)
+            self.bio_publisher.publish(bio_input)
+
+        else:
+            pass  # TODO: implement new bio control topics
+
+    def arm_manual_stop_msg(self):
+        return JointJog(
+            header=Header(frame_id="base_link", stamp=self.get_clock().now().to_msg()),
+            joint_names=self.all_joint_names,
+            velocities=[0.0] * len(self.all_joint_names),
+        )
+
+    def arm_ik_twist_stop_msg(self):
+        return TwistStamped(
+            header=Header(frame_id="base_link", stamp=self.get_clock().now().to_msg())
+        )
 
 
-def deadzone(value: float, threshold=0.05) -> float:
-    """ Apply a deadzone to a joystick input so the motors don't sound angry """
+def stick_deadzone(value: float, threshold=STICK_DEADZONE) -> float:
+    """Apply a deadzone to a joystick input so the motors don't sound angry"""
     if abs(value) < threshold:
         return 0
     return value
 
 
-def main(args=None):
-    rclpy.init(args=args)
-    node = Headless()
-    rclpy.spin(node)
-    rclpy.shutdown()
+def stick_to_arm_direction(value: float, threshold=ARM_DEADZONE) -> int:
+    """Apply a larger deadzone to a stick input and make digital/binary instead of analog"""
+    if abs(value) < threshold:
+        return 0
+    return int(copysign(1, value))
 
-if __name__ == '__main__':
-    signal.signal(signal.SIGTERM, lambda signum, frame: sys.exit(0))  # Catch termination signals and exit cleanly
+
+def is_user_in_group(group_name: str) -> bool:
+    # Copied from https://zetcode.com/python/os-getgrouplist/
+    try:
+        username = os.getlogin()
+
+        # Get group ID from name
+        group_info = grp.getgrnam(group_name)
+        target_gid = group_info.gr_gid
+
+        # Get user's groups
+        user_info = pwd.getpwnam(username)
+        user_groups = os.getgrouplist(username, user_info.pw_gid)
+
+        return target_gid in user_groups
+    except KeyError:
+        return False
+
+
+def exit_handler(signum, frame):
+    print("Caught SIGTERM. Exiting...")
+    rclpy.try_shutdown()
+    sys.exit(0)
+
+
+def main(args=None):
+    try:
+        rclpy.init(args=args)
+
+        # Catch termination signals and exit cleanly
+        signal.signal(signal.SIGTERM, exit_handler)
+
+        node = Headless()
+        rclpy.spin(node)
+    except (KeyboardInterrupt, ExternalShutdownException):
+        print("Caught shutdown signal. Exiting...")
+    finally:
+        rclpy.try_shutdown()
+
+
+if __name__ == "__main__":
     main()

src/latency_tester/src/embedded_ping.cpp

@@ -26,7 +26,7 @@ class LatencyTester : public rclcpp::Node
 {
 public:
     LatencyTester()
-    : Node("latency_tester"), count_(0), target_mcu_("core")
+    : Node("latency_tester"), count_(0)
     {
         publisher_ = this->create_publisher<std_msgs::msg::String>("/anchor/relay", 10);
         timer_ = this->create_wall_timer(
@@ -35,6 +35,8 @@ public:
             "/anchor/debug",
             10,
             std::bind(&LatencyTester::response_callback, this, std::placeholders::_1));
+
+        target_mcu_ = this->declare_parameter<std::string>("target_mcu", "core");
     }
 
 private:

treefmt.nix

@@ -0,0 +1,8 @@
+{ pkgs, ... }:
+{
+  projectRootFile = "flake.nix";
+  programs = {
+    nixfmt.enable = true;
+    black.enable = true;
+  };
+}